Nobody any idea? Johan.
On Wednesday 25 January 2006 23:01, Johan Braeken wrote: > On Wednesday 18 January 2006 10:28, Johan Braeken wrote: > > Hi all, > > > > I'm still strugling to get my PVR-500 working on my PC. > > I have a PVR-350 also, which is working perfectly. > > > > PVR-350 = /dev/video0 > > PVR-500 = /dev/video1 and 2 > > > > The problem with the PVR-500 is; although it's detected fine by IVTV, the > > picture quality is very bad on both tuners. > > Example: > Still frame: sample.png, 660k, www.knudde.be/sample.png > 10 second clip: sample.mpg, 3.2M, www.knudde.be/sample.mpg > > I'm almost sure the problem is because there goes something wrong with the > > detection of the PVR500: > >From the dmesg output: (Complete output below.) > > ... > ivtv1: This is the first unit of a PVR500 > ... > ivtv1: Initialized WinTV PVR 500 (unit #1), card #1 > ... > ivtv: ====================== NEXT CARD ====================== > ... > ivtv2: This is the first unit of a PVR500 > ... > ivtv2: Initialized WinTV PVR 500 (unit #1), card #2 > ... > > For some reasson IVTV thinks these are 2 different cards. > I checked various other dmesg outputs and they all say "unit #2, card #1" > for the second tuner. > > Is there a way to force this in the configurqtion file or is there anything > that can be done to make the detection work OK? > > > Best regards, > > Johan Braeken > > > Here is my IVTV dmesg output: > > > > ivtv: ==================== START INIT IVTV ==================== > > ivtv: version 0.4.0 (tagged release) loading > > ivtv: Linux version: 2.6.12-gentoo-r10 preempt PENTIUM4 gcc-3.3 > > ivtv: In case of problems please include the debug info > > ivtv: between the START INIT IVTV and END INIT IVTV lines when > > ivtv: mailing the ivtv-devel mailinglist. > > ivtv0: Autodetected WinTV PVR 350 card (iTVC15 based) > > ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKF] -> GSI 11 (level, low) > > -> IRQ 11 > > ivtv0: Unreasonably low latency timer, setting to 64 (was 32) > > tveeprom: ivtv version > > tveeprom: Hauppauge: model = 48139, rev = K157, serial# = 7521063 > > tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38) > > tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom = > > 0x74, v4l2 = 0x00400e17) > > tveeprom: audio processor = MSP4418 (type = 19) > > tveeprom: decoder processor = SAA7115 (type = 13) > > ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] > > tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 > > ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] > > saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) > > ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21] > > saa7127 0-0044: saa7127 found @ 0x88 (ivtv i2c driver #0) > > ivtv0: i2c attach to card #0 ok [client=saa7127, addr=44] > > msp34xx: ivtv version > > msp34xx: init: chip=MSP3418W-B3, has NICAM support, simple (D) mode, > > simpler (G) no-thread mode > > msp34xx: $Id$ compiled on: Oct 25 2005 13:51:06 > > ivtv0: i2c attach to card #0 ok [client=MSP3418W-B3, addr=40] > > tda9885/6/7: (ivtv) chip found @ 0x86 > > ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] > > ivtv0: loading /lib/modules/ivtv-fw-enc.bin > > ivtv0: loading /lib/modules/ivtv-fw-dec.bin > > ivtv0: Encoder revision: 0x02050032 > > ivtv0: Decoder revision: 0x02020023 > > ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB > > total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers > > (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 > > buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 > > x 4608 buffers (2048KB total) > > ivtv0: Create encoder radio stream > > ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB > > total) ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB > > total) ivtv0: Create decoder VOUT stream > > ivtv0: Allocate DMA decoder YUV stream: 24 x 43200 buffers (1024KB total) > > ivtv0: loading /lib/modules/ivtv_init_mpeg.bin > > tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv > > i2c driver #0 > > spurious 8259A interrupt: IRQ7. > > ivtv0: Initialized WinTV PVR 350, card #0 > > ivtv: ====================== NEXT CARD ====================== > > ivtv1: Autodetected WinTV PVR 150 card (iTVC16 based) > > ACPI: PCI Interrupt 0000:03:08.0[A] -> Link [LNKA] -> GSI 10 (level, low) > > -> IRQ 10 > > ivtv1: Unreasonably low latency timer, setting to 64 (was 32) > > tveeprom: Second (radio) tuner idx 101 > > tveeprom: ivtv version > > tveeprom: Hauppauge: model = 23559, rev = D591, serial# = 8223738 > > tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56) > > tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom = > > 0x74, v4l2 = 0x00400e17) > > tveeprom: audio processor = CX25843 (type = 25) > > tveeprom: decoder processor = CX25843 (type = 1e) > > ivtv1: i2c attach to card #1 ok [client=tveeprom, addr=50] > > tuner (ivtv): chip found at addr 0xc0 i2c-bus ivtv i2c driver #1 > > TEA5767 detected. > > ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=60] > > tuner: type set to 62 (Philips TEA5767HN FM Radio) by autodetect > > type set to 62 (Philips TEA5767HN FM Radio) > > tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 > > ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=61] > > tda9885/6/7: (ivtv) chip found @ 0x86 > > ivtv1: i2c attach to card #1 ok [client=tda9887, addr=43] > > ivtv1: This is the first unit of a PVR500 > > cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) > > cx25840 1-0044: loaded /lib/modules/HcwMakoA.ROM firmware (14264 bytes) > > ivtv1: i2c attach to card #1 ok [client=cx25840, addr=44] > > wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #1) > > ivtv1: i2c attach to card #1 ok [client=wm8775, addr=1b] > > ivtv1: Detected a TEA5767 radio tuner. Enabling radio support. > > ivtv1: loading /lib/modules/ivtv-fw-enc.bin > > ivtv1: Encoder revision: 0x02050032 > > ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB > > total) ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers > > (2048KB total) ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 > > buffers (2048KB total) ivtv1: Allocate DMA encoder PCM audio stream: 455 > > x 4608 buffers (2048KB total) > > ivtv1: Create encoder radio stream > > tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by ivtv > > i2c driver #1 > > ivtv1: Initialized WinTV PVR 500 (unit #1), card #1 > > ivtv: ====================== NEXT CARD ====================== > > ivtv2: Autodetected WinTV PVR 150 card (iTVC16 based) > > ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 12 > > PCI: setting IRQ 12 as level-triggered > > ACPI: PCI Interrupt 0000:03:09.0[A] -> Link [LNKC] -> GSI 12 (level, low) > > -> IRQ 12 > > ivtv2: Unreasonably low latency timer, setting to 64 (was 32) > > tveeprom: Second (radio) tuner idx 101 > > tveeprom: ivtv version > > tveeprom: Hauppauge: model = 23559, rev = D591, serial# = 8223738 > > tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56) > > tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom = > > 0x74, v4l2 = 0x00400e17) > > tveeprom: audio processor = CX25843 (type = 25) > > tveeprom: decoder processor = CX25843 (type = 1e) > > ivtv2: i2c attach to card #2 ok [client=tveeprom, addr=50] > > tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #2 > > ivtv2: i2c attach to card #2 ok [client=(tuner unset), addr=61] > > tda9885/6/7: (ivtv) chip found @ 0x86 > > ivtv2: i2c attach to card #2 ok [client=tda9887, addr=43] > > cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #2) > > cx25840 2-0044: loaded /lib/modules/HcwMakoA.ROM firmware (14264 bytes) > > ivtv2: i2c attach to card #2 ok [client=cx25840, addr=44] > > wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #2) > > ivtv2: i2c attach to card #2 ok [client=wm8775, addr=1b] > > ivtv2: This is the first unit of a PVR500 > > ivtv2: loading /lib/modules/ivtv-fw-enc.bin > > ivtv2: Encoder revision: 0x02050032 > > ivtv2: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB > > total) ivtv2: Allocate DMA encoder YUV stream: 194 x 10800 buffers > > (2048KB total) ivtv2: Allocate DMA encoder VBI stream: 120 x 17472 > > buffers (2048KB total) ivtv2: Allocate DMA encoder PCM audio stream: 455 > > x 4608 buffers (2048KB total) > > tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by ivtv > > i2c driver #2 > > ivtv2: Initialized WinTV PVR 500 (unit #1), card #2 > > ivtv: ==================== END INIT IVTV ==================== -- Johan Braeken http://www.knudde.be _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
