I've seen this issue on this list a few times, but
never a solution. Mye a problem is that after I do a
reboot my pvr 250 is detected as a 150. If I do a
complete shut down and the turmn on it detects as a
pvr250 like it should. I have tried every firmware on
shspvr's ftp site under the pvr250-350 directory and I
have tried a few under the pvr150-500 directory. This
problem started happening somewhere in the mid 0.4.0
timeframe. I am currently using the latest svn
version and that doesn't seem to work. If you have
any questions, please let me know. I am running a
pvr250 and 350 together. I am running FC4 with smp
kernel. Kernel 2.6.14-1.656 Here is my ivtv log:
ivtv: ==================== START INIT IVTV
====================
ivtv: version 0.4.2 (development revision 3123)
loading
ivtv: Linux version: 2.6.14-1.1656_FC4smp SMP 686
REGPARM 4KSTACKS gcc-4.0
ivtv: In case of problems please include the debug
info between
ivtv: the START INIT IVTV and END INIT IVTV lines,
along with
ivtv: any module options, when mailing the ivtv-users
mailinglist.
ivtv0: Autodetected WinTV PVR 350 card (cx23415 based)
ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 17 (level,
low) -> IRQ 177
ivtv0: Unreasonably low latency timer, setting to 64
(was 32)
tveeprom: The eeprom says no radio is present, but the
tuner type 68
tveeprom: indicates otherwise. I will assume that
radio is present.
tveeprom: ivtv version
tveeprom: Hauppauge: model = 48132, rev = K268,
serial# = 8207888
tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type =
47)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 =
0x00001000)
tveeprom: audio processor = MSP4448 (type = 1b)
tveeprom: decoder processor = SAA7115 (type = 13)
ivtv0: i2c attach to card #0 ok [client=tveeprom,
addr=50]
tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c
driver #0
ivtv0: i2c attach to card #0 ok [client=(tuner unset),
addr=61]
saa7115 1-0021: ivtv driver
saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver
#0)
ivtv0: i2c attach to card #0 ok [client=saa7115,
addr=21]
saa7127 1-0044: ivtv driver
saa7127 1-0044: saa7129 found @ 0x88 (ivtv i2c driver
#0)
ivtv0: i2c attach to card #0 ok [client=saa7127,
addr=44]
msp3400 1-0040: ivtv driver
msp3400 1-0040: chip=MSP4448G-A2 +nicam +simple
+simpler +radio mode=simpler
ivtv0: i2c attach to card #0 ok [client=MSP4448G-A2,
addr=40]
msp3400 1-0040: msp34xxg daemon started
tda9887 1-0043: (ivtv) chip found @ 0x86 (ivtv i2c
driver #0)
ivtv0: i2c attach to card #0 ok [client=tda9887,
addr=43]
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144
bytes)
ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144
bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Decoder revision: 0x02020023
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768
buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800
buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472
buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x
4608 buffers (2048KB total)
ivtv0: Create encoder radio stream
ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536
buffers (1024KB total)
ivtv0: Allocate DMA decoder VBI stream: 512 x 2048
buffers (1024KB total)
ivtv0: Create decoder VOUT stream
ivtv0: Allocate DMA decoder YUV stream: 24 x 43200
buffers (1024KB total)
ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648
bytes)
tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv
i2c driver #0
ivtv0: Initialized WinTV PVR 350, card #0
ivtv: ====================== NEXT CARD
======================
ivtv1: Autodetected WinTV PVR 150 card (cx23416 based)
ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level,
low) -> IRQ 185
ivtv1: Unreasonably low latency timer, setting to 64
(was 32)
tveeprom: ivtv version
tveeprom: Hauppauge: model = 32062, rev = B185,
serial# = 7367115
tveeprom: tuner = TCL 2002N 6A (idx = 85, type = 50)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 =
0x00001000)
tveeprom: audio processor = MSP3445 (type = c)
tveeprom: decoder processor = SAA7115 (type = 13)
ivtv1: i2c attach to card #1 ok [client=tveeprom,
addr=50]
tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c
driver #1
ivtv1: i2c attach to card #1 ok [client=(tuner unset),
addr=61]
saa7115 2-0021: ivtv driver
saa7115 2-0021: saa7115 found @ 0x42 (ivtv i2c driver
#1)
ivtv1: i2c attach to card #1 ok [client=saa7115,
addr=21]
msp3400 2-0040: ivtv driver
msp3400 2-0040: chip=MSP3445G-B8 +nicam +simple
+simpler +radio mode=simpler
msp3400 2-0040: msp34xxg daemon started
ivtv1: i2c attach to card #1 ok [client=MSP3445G-B8,
addr=40]
ivtv1 warning: i2c client addr: 0x44 not found for
command 0xc008561c!
ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144
bytes)
ivtv1: Encoder revision: 0x02050032
ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768
buffers (4096KB total)
ivtv1: Allocate DMA encoder YUV stream: 194 x 10800
buffers (2048KB total)
ivtv1: Allocate DMA encoder VBI stream: 120 x 17472
buffers (2048KB total)
ivtv1: Allocate DMA encoder PCM audio stream: 455 x
4608 buffers (2048KB total)
tuner: type set to 50 (TCL 2002N) by ivtv i2c driver
#1
ivtv1 warning: i2c client addr: 0x44 not found for
command 0x40085618!
ivtv1 warning: i2c client addr: 0x44 not found for
command 0xc0045627!
ivtv1 warning: i2c client addr: 0x1b not found for
command 0x40046d11!
ivtv1 warning: i2c client addr: 0x44 not found for
command 0x40046d11!
ivtv1 warning: i2c client addr: 0x44 not found for
command 0x40085618!
ivtv1 warning: i2c client addr: 0x44 not found for
command 0xc008561c!
ivtv1 warning: i2c client addr: 0x44 not found for
command 0x40045613!
ivtv1 warning: i2c client addr: 0x1b not found for
command 0x402c5639!
ivtv1 warning: i2c client addr: 0x44 not found for
command 0x402c5639!
ivtv1 warning: i2c client addr: 0x44 not found for
command 0x40045612!
ivtv1 warning: i2c client addr: 0x44 not found for
command 0xc008561c!
ivtv1: Initialized WinTV PVR 150, card #1
ivtv: ==================== END INIT IVTV
====================
Modprobe.conf:
alias eth0 8139too
alias snd-card-0 snd-intel8x0
options snd-card-0 index=0
options snd-intel8x0 index=0
remove snd-intel8x0 { /usr/sbin/alsactl store 0
>/dev/null 2>&1 || : ; }; /sbin/modprobe -r
--ignore-remove snd-intel8x0
alias usb-controller ehci-hcd
alias usb-controller1 uhci-hcd
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
