On Monday 13 March 2006 21:04, Robert Suijker wrote:
> >Several people reported problems with the saturation of the
> > PVR150/500
>
> cards. Please try the following command:
> >ivtvctl -g reg=0x401,val=0xe0
> >
> >You have to be root to run this command and you may have to pass the
> > -d
>
> /dev/videoX option if your card is not >/dev/video0. You also have to
> run that command twice for the PVR500, once for each unit.
>
> >Chroma was handled badly for the tuner and composite inputs, this
> > should
>
> fix it. The bits that are set by this command
>
> >used to be present in old ivtv releases but they were dropped for no
>
> apparent reason during a rewrite of the cx25840
>
> >module somewhere around 0.3.2.
> >
> >Please test and report whether this fixes the saturation issues.
> >
> > Hans
>
> I've tried the following command:
> ivtvctl -d /dev/video0 -g reg=0x401,val=0xe0
>
> But I get:
> ioctl IVTV_IOC_S_DECODER_REG failed: Invalid argument
>
> I'm running 0.4.3.
I'm guessing that your ivtvctl is from an older version. If you run
ivtvctl --version, then the reported version should be 0.4.3.
Hans
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
