Hans Verkuil wrote: > On Tuesday 02 May 2006 08:05, Hans Verkuil wrote: >> On Monday 01 May 2006 20:16, Sigurd Nes wrote: >>> version 0.4.5 (development revision 3252) works fine for my box >>> with 1 x pvr350 and 1 x pvr500mce. >>> >>> Uppgraded to latest (3269) - the sound disappeared on the 350 >>> (picture is fine) - reverted to 3252 - works fine on all tuners. >> Hi Sigurd, >> >> Can you give me the INIT IVTV messages from dmesg? > > Before I forget: please do this with the latest (3269) ivtv-0.4. Also > run 'ivtvctl --log-status' (and post the output) for the 350 device > when tuned to a channel. > > Thanks, > > Hans > I was wrong - it is the 500 that is muted (both tuners).
here is INIT IVTV and ivtvctl --log-status on both 500 tuners: ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.4.5 (development revision 3269) loading ivtv: Linux version: 2.6.15.3 K7 gcc-4.0 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected WinTV PVR 350 card (cx23415 based) ivtv0: Unreasonably low latency timer, setting to 64 (was 32) tveeprom: ivtv version tveeprom: Hauppauge: model = 48139, rev = K257, serial# = 7596580 tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio processor = MSP4418 (type = 19) tveeprom: decoder processor = SAA7115 (type = 13) ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] saa7115 0-0021: ivtv driver saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21] saa7127 0-0044: ivtv driver saa7127 0-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=saa7127, addr=44] msp3400 0-0040: ivtv driver msp3400 0-0040: chip=MSP4418G-B3 +nicam +simple +simpler +radio mode=simpler ivtv0: i2c attach to card #0 ok [client=MSP4418G-B3, addr=40] msp3400 0-0040: msp34xxg daemon started tda9887 0-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02050032 ivtv0: Decoder revision: 0x02020023 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv0: Create encoder radio stream ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total) ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total) ivtv0: Create decoder VOUT stream ivtv0: Allocate DMA decoder YUV stream: 20 x 51840 buffers (1024KB total) ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv i2c driver #0 ivtv0: Initialized WinTV PVR 350, card #0 ivtv: ====================== NEXT CARD ====================== ivtv1: Autodetected WinTV PVR 150 card (cx23416 based) ivtv1: Unreasonably low latency timer, setting to 64 (was 32) tveeprom: Second (radio) tuner idx 101 tveeprom: ivtv version tveeprom: Hauppauge: model = 23559, rev = D391, serial# = 7743994 tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio processor = CX25843 (type = 25) tveeprom: decoder processor = CX25843 (type = 1e) ivtv1: i2c attach to card #1 ok [client=tveeprom, addr=50] tuner (ivtv): chip found at addr 0xc0 i2c-bus ivtv i2c driver #1 TEA5767 detected. ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=60] tuner: type set to 62 (Philips TEA5767HN FM Radio) by autodetect type set to 62 (Philips TEA5767HN FM Radio) tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=61] tda9887 1-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #1) ivtv1: i2c attach to card #1 ok [client=tda9887, addr=43] ivtv1: This is the first unit of a PVR500 cx25840 1-0044: ivtv driver cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) cx25840 1-0044: loaded v4l-cx25840.fw firmware (14264 bytes) ivtv1: i2c attach to card #1 ok [client=cx25840, addr=44] wm8775 1-001b: ivtv driver wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #1) ivtv1: i2c attach to card #1 ok [client=wm8775, addr=1b] ivtv1: Detected a TEA5767 radio tuner. Enabling radio support. ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv1: Encoder revision: 0x02050032 ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv1: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) ivtv1: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv1: Create encoder radio stream tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by ivtv i2c driver #1 ivtv1: Initialized WinTV PVR 500 (unit #1), card #1 ivtv: ====================== NEXT CARD ====================== ivtv2: Autodetected WinTV PVR 150 card (cx23416 based) ivtv2: Unreasonably low latency timer, setting to 64 (was 32) tveeprom: Second (radio) tuner idx 101 tveeprom: ivtv version tveeprom: Hauppauge: model = 23559, rev = D391, serial# = 7743994 tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio processor = CX25843 (type = 25) tveeprom: decoder processor = CX25843 (type = 1e) ivtv2: i2c attach to card #2 ok [client=tveeprom, addr=50] tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #2 ivtv2: i2c attach to card #2 ok [client=(tuner unset), addr=61] tda9887 2-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #2) ivtv2: i2c attach to card #2 ok [client=tda9887, addr=43] cx25840 2-0044: ivtv driver cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #2) cx25840 2-0044: loaded v4l-cx25840.fw firmware (14264 bytes) ivtv2: i2c attach to card #2 ok [client=cx25840, addr=44] wm8775 2-001b: ivtv driver wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #2) ivtv2: i2c attach to card #2 ok [client=wm8775, addr=1b] ivtv2: This is the second unit of a PVR500 ivtv2: Correcting tveeprom data: no radio present on second unit ivtv2: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv2: Encoder revision: 0x02050032 ivtv2: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv2: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) ivtv2: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) ivtv2: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by ivtv i2c driver #2 ivtv2: Initialized WinTV PVR 500 (unit #2), card #2 ivtv: ==================== END INIT IVTV ==================== [EMAIL PROTECTED] mythtv]# ivtvctl --log-status --device=/dev/video2 ioctl VIDIOC_LOG_STATUS ok ivtv2: ================= START STATUS CARD #2 ================= cx25840 2-0044: Video signal: present cx25840 2-0044: Detected format: PAL-BDGHI cx25840 2-0044: Detected audio mode: mono cx25840 2-0044: Detected audio standard: no detected audio standard cx25840 2-0044: Audio muted: yes cx25840 2-0044: Audio microcontroller: running cx25840 2-0044: Configured audio standard: automatic detection cx25840 2-0044: Configured audio system: automatic standard and mode detection cx25840 2-0044: Specified standard: PAL-BDGHI cx25840 2-0044: Specified input: Tuner cx25840 2-0044: Specified audio input: Tuner cx25840 2-0044: Specified audioclock freq: 48 kHz cx25840 2-0044: Preferred audio mode: stereo cx25840 2-0044: Selected 65 MHz format: autodetect cx25840 2-0044: Selected 45 MHz format: chroma wm8775 2-001b: Input: default tda9887 2-0043: Data bytes: b=14 c=70 e=09 ivtv2: ================== END STATUS CARD #2 ================== [EMAIL PROTECTED] mythtv]# ivtvctl --log-status --device=/dev/video1 ioctl VIDIOC_LOG_STATUS ok ivtv1: ================= START STATUS CARD #1 ================= cx25840 1-0044: Video signal: present cx25840 1-0044: Detected format: PAL-BDGHI cx25840 1-0044: Detected audio mode: mono cx25840 1-0044: Detected audio standard: A2-BG cx25840 1-0044: Audio muted: no cx25840 1-0044: Audio microcontroller: running cx25840 1-0044: Configured audio standard: automatic detection cx25840 1-0044: Configured audio system: automatic standard and mode detection cx25840 1-0044: Specified standard: PAL-BDGHI cx25840 1-0044: Specified input: Tuner cx25840 1-0044: Specified audio input: Tuner cx25840 1-0044: Specified audioclock freq: 48 kHz cx25840 1-0044: Preferred audio mode: stereo cx25840 1-0044: Selected 65 MHz format: autodetect cx25840 1-0044: Selected 45 MHz format: chroma wm8775 1-001b: Input: default tda9887 1-0043: Data bytes: b=14 c=70 e=09 ivtv1: ================== END STATUS CARD #1 ================== _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
