Hi.  On my 64-bit box with a PVR-150, I recently upgraded from Mandriva
2006 to 2007, also upgrading ivtv and mythtv, and NTSC closed captions
stopped working.  

Under 2006 I was using a Mandriva 2.6.12-17mdksmp
kernel, self-compiled ivtv-0.4.4, and mythtv 0.19 from PLF.  With this
setup I got NTSC closed captions fine (except for a mythtv bug that
sometimes only displayed a caption for one frame, but that's claimed to
be fixed in 0.20).

Under 2007, I have Mandriva kernel 2.6.17-5mdv.  I first tried the
ivtv-0.7.0 that comes with Mandriva 2007 and mythtv 0.20a from PLF, but
later also tried ivtv-0.7.1 and tried compiling mythtv 0.20a myself
with the patch from
http://ivtvdriver.org/trac/browser/ivtv/branches/0.8/misc/MythTV-0.20.diff?rev=3470,
just in case this patch is needed with 0.7.x as well as 0.8.0.  That
didn't help.

Checking with the vbi-detect and vbi test programs, it looks like
something is going wrong with the slicing.  vbi-detect typically finds
cc data on line 18 and/or 15, which I understand is wrong -- it should
be 21.  As a hack I tried changing vbi.c to accept the data on these
lines instead of insisting on 21, but it prints only garbage then.

ivtv:  ==================== START INIT IVTV ====================
ivtv:  version 0.7.1 (tagged release) loading
ivtv:  Linux version: 2.6.17-5mdv SMP mod_unload gcc-4.1
ivtv:  In case of problems please include the debug info between
ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
ivtv:  any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
GSI 21 sharing vector 0x42 and IRQ 21
ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [APC2] -> GSI 17 (level,
low) -> IRQ 66 ivtv0: Unreasonably low latency timer, setting to 64
(was 32) tveeprom 0-0050: Hauppauge model 26032, rev C182, serial#
2953462 tveeprom 0-0050: tuner model is LG TAPC H791F (idx 82, type 39)
tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 0-0050: audio processor is CX25841 (idx 35)
tveeprom 0-0050: decoder processor is CX25841 (idx 28)
tveeprom 0-0050: has no radio, has IR remote
tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
cx25840 0-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0)
cx25840 0-0044: loaded v4l-cx25840.fw firmware (14264 bytes)
wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02040011
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB
total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers
(2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472
buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream:
455 x 4608 buffers (2048KB total) tuner 0-0061: type set to 39 (LG NTSC
(newer TAPC series)) ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
ivtv:  ====================  END INIT IVTV  ====================


-- 
Tim Mann  [EMAIL PROTECTED]  http://tim-mann.org/

_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel

Reply via email to