Hi! I've tried with r3521 and now "cat /dev/video0" output absolutely nothing even after restarting my computer. If there's anything I can try to help debug the problem let me know.
Ben. ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.4.8 (development revision 3521M) loading ivtv: Linux version: 2.4.32 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected WinTV PVR 350 card (cx23415 based) ivtv0: Unreasonably low latency timer, setting to 64 (was 48) tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] i2c-core.o: client [(tuner unset)] registered to adapter [ivtv i2c driver #0](pos. 0). saa7127 0-0044: ivtv driver saa7127 0-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=saa7127, addr=44] i2c-core.o: client [saa7127] registered to adapter [ivtv i2c driver #0](pos. 1). saa7115 0-0021: ivtv driver saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21] i2c-core.o: client [saa7115] registered to adapter [ivtv i2c driver #0](pos. 2). msp3400 0-0040: ivtv driver msp3400 0-0040: chip=MSP4448G-A2 +nicam +simple +simpler +radio mode=simpler msp3400 0-0040: msp34xxg daemon started ivtv0: i2c attach to card #0 ok [client=MSP4448G-A2, addr=40] i2c-core.o: client [MSP4448G-A2] registered to adapter [ivtv i2c driver #0](pos. 3). i2c-core.o: adapter ivtv i2c driver #0 registered as adapter 0. i2c-core.o: driver tveeprom registered. tveeprom: ivtv version tveeprom: Hauppauge: model = 48132, rev = K268, serial# = 8376256 tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio processor = MSP4448 (type = 1b) tveeprom: decoder processor = SAA7115 (type = 13) ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] i2c-core.o: client [tveeprom] registered to adapter [ivtv i2c driver #0](pos. 4). i2c-core.o: driver i2c tda9887 driver registered. ivtv0: loaded /lib/modules/v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: loaded /lib/modules/v4l-cx2341x-dec.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02050032 ivtv0: Decoder revision: 0x02020023 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv0: Create encoder radio stream ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total) ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total) ivtv0: Create decoder VOUT stream ivtv0: Allocate DMA decoder YUV stream: 24 x 43200 buffers (1024KB total) ivtv0: loaded /lib/modules/v4l-cx2341x-init.mpg firmware (155648 bytes) tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv i2c driver #0 ivtv0: Initialized WinTV PVR 350, card #0 ivtv: ==================== END INIT IVTV ==================== Benjamin M. wrote, On 19/10/06 16:25: > Here more informations: > > I have tried all the possibilities while running "cat /dev/video0" > - ivtv-tune -c with current/any other channel > - ivtv-tune -c while the input is set on composite/S-Video > (input=0/6) or tuner (input=4) > with the same result in all cases: > /dev/video0 stops sending data... > But: > - /dev/video16 is never affected. For example cat /tmp/video.mpg > > /dev/video16 always works. > <snip> _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
