I'm new to the list, but what does 'modprobe -v -n ivtv' result in? On my system, I get...
snape ~ # modprobe -v -n ivtv insmod /lib/modules/2.6.18-gentoo/kernel/drivers/media/video/v4l2-common.ko insmod /lib/modules/2.6.18-gentoo/kernel/drivers/media/video/v4l1-compat.ko insmod /lib/modules/2.6.18-gentoo/kernel/drivers/media/video/videodev.ko insmod /lib/modules/2.6.18-gentoo/kernel/drivers/media/video/tveeprom.ko insmod /lib/modules/2.6.18-gentoo/kernel/drivers/media/video/cx2341x.ko insmod /lib/modules/2.6.18-gentoo/kernel/drivers/base/firmware_class.ko insmod /lib/modules/2.6.18-gentoo/extra/ivtv.ko but obviously I'm messing around with 2.6.18. You might also check with 'modinfo <each module>' and see if it has some broken dependancy? Are you using the modules for tveeprom, etc from ivtv or from the kernel? On 9/30/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > Hello, > > In installed a new computer with kernel 2.6.17.6 and ivtv 0.7.1. De > computer has one pvr-150 as it's capture card. > > When loading ivtv it fails to load most required modules resulting in > output like this: > > Linux video capture interface: v1.00 > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.7.1 (tagged release) loading > ivtv: Linux version: 2.6.17.6 mod_unload K7 REGPARM gcc-4.1 > ivtv: In case of problems please include the debug info between > ivtv: the START INIT IVTV and END INIT IVTV lines, along with > ivtv: any module options, when mailing the ivtv-users mailinglist. > ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) > ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18 > ACPI: PCI Interrupt 0000:01:01.0[A] -> Link [LNKB] -> GSI 18 (level, low) -> > IRQ 21 > ivtv0: Failed to load module tveeprom > tveeprom 4-0050: Hauppauge model 26559, rev G189, serial# 9512053 > tveeprom 4-0050: tuner model is TCL MFPE05 2 (idx 89, type 38) > tveeprom 4-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom > 0x74) > tveeprom 4-0050: audio processor is CX25843 (idx 37) > tveeprom 4-0050: decoder processor is CX25843 (idx 30) > tveeprom 4-0050: has radio, has no IR remote > ivtv0: Failed to load module tuner > ivtv0: Failed to load module tda9887 > ivtv0: Failed to load module cx25840 > ivtv0: Failed to load module wm8775 > ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) > ivtv0: Encoder revision: 0x02050032 > ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) > ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) > ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) > ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB > total) > ivtv0: Create encoder radio stream > ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c! > ivtv0: i2c addr 0x44 not found for command 0x4008646f! > ivtv0: i2c hardware 0x00000020 not found for command 0x4008646d! > ivtv0: i2c hardware 0x00000001 not found for command 0x4008646d! > ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c! > ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c! > ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c! > ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 > ivtv: ==================== END INIT IVTV ==================== > > although ivtv says it can't load tveeprom, it gets loaded someho, but > capture doesn't work. > > If I manually add tda9887 wm8775 tuner tveeprom and cx25840 > > Everything looks OK and I get: > > tuner 4-0061: chip found @ 0xc2 (ivtv i2c driver #0) > tda9887 4-0043: chip found @ 0x86 (ivtv i2c driver #0) > wm8775 4-001b: chip found @ 0x36 (ivtv i2c driver #0) > cx25840 4-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) > cx25840 4-0044: loaded v4l-cx25840.fw firmware (16382 bytes) > ivtv0: Removed Hauppauge WinTV PVR-150, card #0 > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.7.1 (tagged release) loading > ivtv: Linux version: 2.6.17.6 mod_unload K7 REGPARM gcc-4.1 > ivtv: In case of problems please include the debug info between > ivtv: the START INIT IVTV and END INIT IVTV lines, along with > ivtv: any module options, when mailing the ivtv-users mailinglist. > ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) > ACPI: PCI Interrupt 0000:01:01.0[A] -> Link [LNKB] -> GSI 18 (level, low) -> > IRQ 21 > tuner 4-0061: chip found @ 0xc2 (ivtv i2c driver #0) > tda9887 4-0043: chip found @ 0x86 (ivtv i2c driver #0) > wm8775 4-001b: chip found @ 0x36 (ivtv i2c driver #0) > cx25840 4-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) > cx25840 4-0044: loaded v4l-cx25840.fw firmware (16382 bytes) > ivtv0: Failed to load module tveeprom > tveeprom 4-0050: Hauppauge model 26559, rev G189, serial# 9512053 > tveeprom 4-0050: tuner model is TCL MFPE05 2 (idx 89, type 38) > tveeprom 4-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom > 0x74) > tveeprom 4-0050: audio processor is CX25843 (idx 37) > tveeprom 4-0050: decoder processor is CX25843 (idx 30) > tveeprom 4-0050: has radio, has no IR remote > ivtv0: Failed to load module tuner > ivtv0: Failed to load module tda9887 > ivtv0: Failed to load module cx25840 > ivtv0: Failed to load module wm8775 > ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) > ivtv0: Encoder revision: 0x02050032 > ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) > ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) > ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) > ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB > total) > ivtv0: Create encoder radio stream > tuner 4-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) > ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 > ivtv: ==================== END INIT IVTV ==================== > > As you can see the 'Failed to load' messages remain. > > Any idea what could cause this? > > Kind regards, > > Henk. > > _______________________________________________ > ivtv-devel mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-devel > -- AIM: fryfrog ICQ: 304825 WWW: http://www.fryfrog.com _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
