On Wednesday 20 December 2006 19:02, ivshade wrote:
> Hi.
>
> I tried to get trunk compiling, but,
>
> make -C driver all
> make[1]: Entering directory `/tmp/trunk/driver'
> created ivtv-svnversion.h
> make -C /lib/modules/2.6.19-gentoo-r2/build M=/tmp/trunk/driver
> modules make[2]: Entering directory `/usr/src/linux-2.6.19-gentoo-r2'
> CC [M] /tmp/trunk/driver/ivtv-driver.o
> CC [M] /tmp/trunk/driver/ivtv-fileops.o
> CC [M] /tmp/trunk/driver/ivtv-i2c.o
> CC [M] /tmp/trunk/driver/ivtv-streams.o
> CC [M] /tmp/trunk/driver/ivtv-firmware.o
> CC [M] /tmp/trunk/driver/ivtv-gpio.o
> CC [M] /tmp/trunk/driver/ivtv-queue.o
> CC [M] /tmp/trunk/driver/ivtv-irq.o
> CC [M] /tmp/trunk/driver/ivtv-mailbox.o
> /tmp/trunk/driver/ivtv-mailbox.c:65: error:
> 'CX2341X_ENC_SET_3_2_PULLDOWN' undeclared here (not in a function)
> /tmp/trunk/driver/ivtv-mailbox.c:65: error: array index in
> initializer not of integer type
> /tmp/trunk/driver/ivtv-mailbox.c:65: error: (near initialization for
> 'api_info')
> make[3]: *** [/tmp/trunk/driver/ivtv-mailbox.o] Error 1
> make[2]: *** [_module_/tmp/trunk/driver] Error 2
> make[2]: Leaving directory `/usr/src/linux-2.6.19-gentoo-r2'
> make[1]: *** [all] Error 2
> make[1]: Leaving directory `/tmp/trunk/driver'
> make: *** [all] Error 2
>
> Hope it's not something obvious in my lack of time.
I've updated the trunk. 'CX2341X_ENC_SET_3_2_PULLDOWN' was removed since
it is not implemented in the firmware.
Hans
>
> /Br Fredrik
>
> On Tue, 2006-12-19 at 19:26 +0100, Hans Verkuil wrote:
> > Hi all,
> >
> > I think it is getting time for people to start testing the ivtv
> > trunk from subversion. I've been running it for quite some time now
> > and it looks to be pretty solid. Ian Armstrong has added lots of
> > goodies in the framebuffer department (be sure to read the README
> > notes!), so that can use some testing as well.
> >
> > Regarding DMA problems: I think that these are solved for the
> > PVR500. I haven't yet done a REALLY long duration test but from the
> > shorter tests I did it is looking good. The DMA errors still occur
> > for other cards: it is a hardware issue with the cx23415/6 and
> > there probably isn't anything I can do about it. Just don't use CPU
> > freq. changers and sometimes using a RAID array also messes up the
> > DMA.
> >
> > The reason that it works for the PVR500 is that the PVR500 has a
> > PCI bridge that seems to isolate the cx23416 chips from the main
> > PCI bus. It still could fail on the 0.9 drivers due to the way DMA
> > was handled in the driver. With the new trunk driver all DMA is now
> > done in the interrupt handler.
> >
> > Note: ivtv trunk requires the 2.6.19 kernel. It is probably very
> > easy to backport it to 2.6.18, it may even compile out of the box.
> > I just haven't tested it myself. When this driver version is
> > released I'll definitely backport it to 2.6.18.
> >
> > The trunk driver can be obtained here:
> >
> > http://ivtvdriver.org/viewcvs/ivtv/trunk.tar.gz?view=tar
> >
> > Thanks,
> >
> > Hans
> >
> > _______________________________________________
> > ivtv-devel mailing list
> > [email protected]
> > http://ivtvdriver.org/mailman/listinfo/ivtv-devel
>
> _______________________________________________
> ivtv-devel mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-devel
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
