On Thu, 05 Apr 2007 07:34:12 +0200 Gregor Fuis <[EMAIL PROTECTED]> wrote:
> This script just starts capture cat /dev/videoX > /dev/null and kills > capture after 1 second, then waits 1 second and repeat itself. > > I have an Tyan Trinity i875P, 2.66HT Pentium 4, SATA HD and PVR 350 just > > in the computer. And no mater what I do (nosmp, noapic, disable this in > bios and kernel, card in all pci slots tested, tried NODMA patch from > Ricardo )this script is crashing my system in 30 minutes. But PVR 150 > card works without a problem with this script! Have you checked to see if the system has a bios upgrade for it? Have you tried the PVR-350 in another system, to see if there is something wrong with it, or something wrong with your board. Have you run memtest, to see if the ram is ok? Tyan isn't known for the highest quality motherboards, but then again, they aren't known for the worst. It's an intel chipset, so that adds some confidence as well. > > Gregor > > Brad Barnett wrote: > > I don't know what this script is, I haven't had time to look at it. > > However, marginal chipsets will exhibit problems that they would > > normally not, when using some of these cards.. even with the > > interrupts alone... although DMA does seem to be the main culprit. > > > > Do you have another box you can test this one, preferably one with a > > non-VIA chipset? > > > > _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
