On 4/22/07, Crasher <[EMAIL PROTECTED]> wrote:
> I have an Asus laptop with a Avermedia m104 mini-pci tv tuner and have
> not had any luck getting it installed. I  was wondering if anyone on
> this list has had any luck getting the Tuner part to work correctly.

The tuner you have is likely the XCEIVE XC2028 and this unfortunately
is not supported yet.  The V4L-DVB trunk has some experimental support
for it. There are some instructions in [1] but these are old and will
probably not work anymore.

Greets
Sander

[1] 
http://www.gossamer-threads.com/lists/ivtv/devel/32112?search_string=XC2028;#32112

> [   23.312000] ivtv:  ==================== START INIT IVTV 
> ====================
> [   23.312000] ivtv:  version 0.10.1 (tagged release) loading
> [   23.312000] ivtv:  Linux version: 2.6.20-15-generic SMP mod_unload 586
> [   23.312000] ivtv:  In case of problems please include the debug info 
> between
> [   23.312000] ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
> [   23.312000] ivtv:  any module options, when mailing the ivtv-users
> mailinglist.
> [   23.312000] ivtv0: Unknown card: vendor/device: 4444/0016
> [   23.312000] ivtv0:               subsystem vendor/device: 1461/c136
> [   23.312000] ivtv0:               cx23416 based
> [   23.312000] ivtv0: Defaulting to Hauppauge WinTV PVR-150 card
> [   23.312000] ivtv0: Please mail the vendor/device and subsystem
> vendor/device IDs and what kind of
> [   23.312000] ivtv0: card you have to the ivtv-devel mailinglist
> (www.ivtvdriver.org)
> [   23.312000] ivtv0: Prefix your subject line with [UNKNOWN CARD].
> [   24.044000] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> [   24.260000] ivtv0: Encoder revision: 0x02050032
> [   24.260000] ivtv0: Recommended firmware version is 0x02060039.
> [   24.268000] tveeprom 0-0050: Huh, no eeprom present (err=-121)?
> [   24.268000] tveeprom 0-0050: Encountered bad packet header [02].
> Corrupt or not a Hauppauge eeprom.
> [   24.268000] ivtv0: Invalid EEPROM
> [   24.332000] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> [   24.372000] cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
> [   29.552000] cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
> [   29.780000] ivtv0: Registered device video0 for encoder MPEG (4 MB)
> [   29.780000] ivtv0: Registered device video32 for encoder YUV (2 MB)
> [   29.780000] ivtv0: Registered device vbi0 for encoder VBI (1 MB)
> [   29.780000] ivtv0: Registered device video24 for encoder PCM audio (1 MB)
> [   29.780000] ivtv0: Registered device radio0 for encoder radio
> [   29.844000] ivtv0: i2c hardware 0x00000020 (wm8775) not found for
> command 0x4008646d!
> [   30.012000] tuner 0-0061: tuner type not set
> [   30.048000] tuner 0-0061: tuner type not set
> [   30.172000] ivtv0: Initialized Hauppauge WinTV PVR-150, card #0

_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel

Reply via email to