I recently upgraded from Ubuntu 6.10 to 7.04. In this upgrade my kernel and
ivtv version were also upgraded. I am now experiencing difficulties with getting a continuous stream of sound from my capture card which is an Adaptec AVC 2410. While watching tv with my card, the sound just goes out. The problem can be fixed by restarting the feed from the card, or removing the msp3400 kernel module and reinserting it. Here is the error I get: [427189.250093] msp3400 1-0040: I/O error #0 (read 0x10/0x200) [427189.260658] msp3400 1-0040: I/O error #1 (read 0x10/0x200) [427189.272775] msp3400 1-0040: I/O error #2 (read 0x10/0x200) [427189.283280] msp3400 1-0040: giving up, resetting chip. Sound will go off, sorry folks :-| [427189.287064] msp3400 1-0040: chip reset failed [427189.875497] msp3400 1-0040: I/O error #0 (read 0x10/0x200) [427189.887471] msp3400 1-0040: I/O error #1 (read 0x10/0x200) [427189.899457] msp3400 1-0040: I/O error #2 (read 0x10/0x200) [427189.910079] msp3400 1-0040: giving up, resetting chip. Sound will go off, sorry folks :-| [427189.913768] msp3400 1-0040: chip reset failed [428959.617286] msp3400 1-0040: I/O error #0 (read 0x10/0x200) [428959.630744] msp3400 1-0040: I/O error #1 (read 0x10/0x200) [428959.646785] msp3400 1-0040: I/O error #2 (read 0x10/0x200) [428959.661240] msp3400 1-0040: giving up, resetting chip. Sound will go off, sorry folks :-| [428959.665067] msp3400 1-0040: chip reset failed [432973.212847] msp3400 1-0040: I/O error #0 (read 0x10/0x200) [432973.226222] msp3400 1-0040: I/O error #1 (read 0x10/0x200) [432973.242172] msp3400 1-0040: I/O error #2 (read 0x10/0x200) [432973.256793] msp3400 1-0040: giving up, resetting chip. Sound will go off, sorry folks :-| [432973.260486] msp3400 1-0040: chip reset failed IVTV info: [ 18.020937] ivtv: ==================== START INIT IVTV ==================== [ 18.020943] ivtv: version 0.10.1 (tagged release) loading [ 18.020945] ivtv: Linux version: 2.6.20-15-generic SMP mod_unload 586 [ 18.020948] ivtv: In case of problems please include the debug info between [ 18.020950] ivtv: the START INIT IVTV and END INIT IVTV lines, along with [ 18.020952] ivtv: any module options, when mailing the ivtv-users mailinglist. [ 18.021066] ivtv0: Autodetected Adaptec VideOh! AVC-2410 card (cx23416 based) [ 18.046519] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 19 [ 18.343763] nvidia: module license 'NVIDIA' taints kernel. [ 18.957574] ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) [ 19.174350] ivtv0: Encoder revision: 0x02060039 [ 19.213390] tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0) [ 19.213423] tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner) [ 19.218271] tuner 1-0060: All bytes are equal. It is not a TEA5767 [ 19.218274] tuner 1-0060: chip found @ 0xc0 (ivtv i2c driver #0) [ 19.232016] tuner 1-006b: chip found @ 0xd6 (ivtv i2c driver #0) [ 19.316203] saa7115 1-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0) [ 19.539653] msp3400 1-0040: MSP3425G-B8 found @ 0x80 (ivtv i2c driver #0) [ 19.539658] msp3400 1-0040: MSP3425G-B8 supports radio, mode is autodetect and autoselect [ 19.567933] cs53l32a 1-0011: chip found @ 0x22 (ivtv i2c driver #0) [ 19.589937] ivtv0: Registered device video0 for encoder MPEG (4 MB) [ 19.590178] ivtv0: Registered device video32 for encoder YUV (2 MB) [ 19.590445] ivtv0: Registered device vbi0 for encoder VBI (1 MB) [ 19.590550] ivtv0: Registered device video24 for encoder PCM audio (1 MB) [ 19.590836] tuner 1-0060: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F)) [ 19.974911] ivtv0: Initialized Adaptec VideOh! AVC-2410, card #0 [ 19.975095] ivtv: ==================== END INIT IVTV ==================== If anyone has some suggestions or knows how to fix this issue, please let me know. Thanks, Jay
_______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
