Hey, I am having trouble with ivtv-0.10.1 and kernel-2.6.20-1. I am contemplating downgrading but first I am here looking for suggestions. I posted recently that the sound quality of my recordings are off. The voices are high pitched and now through SPDIF the audio only produces sound through 1 speaker leaving the other 5 void. Can anyone point me the right direction. Where should i be looking, Is ivtv source responsible entirely for audio, the firmware? Are there any dependencies? IE: video4linux.
The above behaviour is reproducable via `cat /dev/video0 > out.mpg`. ivtv-0.10.1-127.fc6 ivtv-firmware-20070217-13.at ivtv-kmdl-2.6.20-1.2948.fc6-0.10.1-127.fc6 ivtv: no version for "struct_module" found: kernel tainted. ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.10.1 (tagged release) loading ivtv: Linux version: 2.6.20-1.2948.fc6 SMP mod_unload 686 4KSTACKS ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge card (cx23416 based) ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 18 (level, low) -> IRQ 19 ivtv0: Unreasonably low latency timer, setting to 64 (was 32) nvidia: module license 'NVIDIA' taints kernel. parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] gameport: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x200, speed 755kHz input: PC Speaker as /class/input/input2 intel_rng: FWH not detected iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006) iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware iTCO_wdt: No card detected ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv0: Encoder revision: 0x02060039 tveeprom 0-0050: Hauppauge model 32062, rev B185, serial# 2868847 tveeprom 0-0050: tuner model is TCL 2002N 6A (idx 85, type 50) tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 0-0050: audio processor is MSP3445 (idx 12) tveeprom 0-0050: decoder processor is SAA7115 (idx 19) tveeprom 0-0050: has no radio, has IR receiver, has no IR transmitter ivtv0: Autodetected Hauppauge WinTV PVR-250 tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0) msp3400 0-0040: MSP3445G-B8 found @ 0x80 (ivtv i2c driver #0) msp3400 0-0040: MSP3445G-B8 supports radio, mode is autodetect and autoselect ivtv0: Registered device video0 for encoder MPEG (4 MB) ivtv0: Registered device video32 for encoder YUV (2 MB) ivtv0: Registered device vbi0 for encoder VBI (1 MB) ivtv0: Registered device video24 for encoder PCM audio (1 MB) tuner 0-0061: type set to 50 (TCL 2002N) ivtv0: Initialized Hauppauge WinTV PVR-250, card #0 ivtv: ==================== END INIT IVTV ==================== _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
