ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.10.1 (tagged release) loading ivtv: Linux version: 2.6.20-gentoo-r8 mod_unload K7 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Unknown card: vendor/device: 4444/0016 ivtv0: subsystem vendor/device: 80ab/0600 ivtv0: cx23416 based ivtv0: Defaulting to Hauppauge WinTV PVR-150 card ivtv0: Please mail the vendor/device and subsystem vendor/device IDs and what kind of ivtv0: card you have to the ivtv-devel mailinglist (www.ivtvdriver.org) ivtv0: Prefix your subject line with [UNKNOWN CARD]. ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5 ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNK1] -> GSI 5 (level, low) -> IRQ 5 ivtv0: Unreasonably low latency timer, setting to 64 (was 32) sn9c102: V4L2 driver for SN9C10x PC Camera Controllers v1:1.27 usb 3-2: SN9C103 PC Camera Controller detected (vid/pid 0x0C45/0x60AF) usb 3-2: PAS202BCA image sensor detected nvidia: no version for "struct_module" found: kernel tainted. nvidia: module license 'NVIDIA' taints kernel. ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) usb 3-2: Initialization succeeded usb 3-2: V4L2 device registered as /dev/video0 usbcore: registered new interface driver sn9c102 ivtv0: Encoder revision: 0x02060039 tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #0) tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) tveeprom 2-0050: Encountered bad packet header [56]. Corrupt or not a Hauppauge eeprom. ivtv0: Invalid EEPROM ivtv0: Registered device video1 for encoder MPEG (4 MB) ivtv0: Registered device video32 for encoder YUV (2 MB) ivtv0: Registered device vbi0 for encoder VBI (1 MB) ivtv0: Registered device video24 for encoder PCM audio (1 MB) ivtv0: Registered device radio0 for encoder radio ivtv0: i2c hardware 0x00000001 (cx2584x) not found for command 0xc008561c! ivtv0: i2c addr 0x44 not found for command 0x4008646f! ivtv0: i2c hardware 0x00000020 (wm8775) not found for command 0x4008646d! ivtv0: i2c hardware 0x00000001 (cx2584x) not found for command 0x4008646d! ivtv0: i2c hardware 0x00000001 (cx2584x) not found for command 0xc008561c! tuner 2-0061: tuner type not set ivtv0: i2c hardware 0x00000001 (cx2584x) not found for command 0xc008561c! tuner 2-0061: tuner type not set ivtv0: i2c hardware 0x00000001 (cx2584x) not found for command 0xc008561c! ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 ivtv: ==================== END INIT IVTV ====================
_______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
