I got the card for real cheap on ebay, it was originally installed in a Hewlett Packard media pc. AFAIK there a quite a few of these cards on sale at ebay, off and on.
After some fiddling I actually got it working with my openSUSE 10.2 by putting this in /etc/modprobe.d/ivtv: options ivtv tuner=43 cardtype=7 newi2c=1 (I think the tuner was autodetected anyway). The Only thing that I can't get to work is the radio. If you need additional information to add this card to the database, please let me know. Gruß Andreas <6>ivtv: ==================== START INIT IVTV ==================== <6>ivtv: version 0.10.3 (tagged release) loading <6>ivtv: Linux version: 2.6.18.8-0.3-default SMP mod_unload 586 REGPARM gcc-4.1 <6>ivtv: In case of problems please include the debug info between <6>ivtv: the START INIT IVTV and END INIT IVTV lines, along with <6>ivtv: any module options, when mailing the ivtv-users mailinglist. <3>ivtv0: Unknown card: vendor/device: 4444/0016 <3>ivtv0: subsystem vendor/device: 1043/462e <3>ivtv0: cx23416 based <3>ivtv0: Defaulting to Hauppauge WinTV PVR-150 card <3>ivtv0: Please mail the vendor/device and subsystem vendor/device IDs and what kind of <3>ivtv0: card you have to the ivtv-devel mailinglist (www.ivtvdriver.org) <3>ivtv0: Prefix your subject line with [UNKNOWN CARD]. <6>ivtv0: Unreasonably low latency timer, setting to 64 (was 32) <6>ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) <6>ivtv0: Encoder revision: 0x02060039 <6>tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0) <4>tuner 1-0060: All bytes are equal. It is not a TEA5767 <6>tuner 1-0060: chip found @ 0xc0 (ivtv i2c driver #0) <6>tveeprom 1-0050: Huh, no eeprom present (err=-121)? <4>tveeprom 1-0050: Encountered bad packet header [5f]. Corrupt or not a Hauppauge eeprom. <3>ivtv0: Invalid EEPROM <6>cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) <6>cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes) <6>ivtv0: Registered device video1 for encoder MPEG (4 MB) <6>ivtv0: Registered device video32 for encoder YUV (2 MB) <6>ivtv0: Registered device vbi1 for encoder VBI (1 MB) <6>ivtv0: Registered device video24 for encoder PCM audio (1 MB) <6>ivtv0: Registered device radio1 for encoder radio <3>ivtv0: i2c hardware 0x00000020 (wm8775) not found for command 0x4008646d! <4>tuner 1-0060: tuner type not set <4>tuner 1-0060: tuner type not set <6>ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 <6>ivtv: ==================== END INIT IVTV ==================== _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
