Dear Hans, I have checkouted userspace-tuner and your tree v4l-dvb-xc. Sound from RCA now works fine on AverMedia MCE116. Thanks a lot ! :)
But there is some troubles with path to tuner-stub.h. I'm doing manually changes to successfully compile this modules. This is card detection dmesg messages: ivtv: Start initialization, version 1.1.0 ivtv0: Initializing card #0 ivtv0: Autodetected AVerTV MCE 116 Plus card (cx23416 based) ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 20 (level, low) -> IRQ 21 ivtv0: Unreasonably low latency timer, setting to 64 (was 32) cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) wm8739 1-001a: chip found @ 0x34 (ivtv i2c driver #0) ivtv0: Registered device video0 for encoder MPEG (4 MB) ivtv0: Registered device video32 for encoder YUV (2 MB) ivtv0: Registered device vbi0 for encoder VBI (1 MB) ivtv0: Registered device video24 for encoder PCM audio (1 MB) ivtv0: Registered device radio0 for encoder radio ivtv0: Initialized card #0: AVerTV MCE 116 Plus ivtv: End initialization and status: ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv0: Encoder revision: 0x02060039 cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes) ivtv0: ================= START STATUS CARD #0 ================= ivtv0: Version: 1.1.0 Card: AVerTV MCE 116 Plus cx25840 1-0044: Video signal: present cx25840 1-0044: Detected format: PAL-BDGHI cx25840 1-0044: Specified standard: PAL-BDGHI cx25840 1-0044: Specified video input: Composite 1 cx25840 1-0044: Specified audioclock freq: 48000 Hz cx25840 1-0044: Detected audio mode: forced mode cx25840 1-0044: Detected audio standard: no detected audio standard cx25840 1-0044: Audio muted: no cx25840 1-0044: Audio microcontroller: stopped cx25840 1-0044: Configured audio standard: automatic detection cx25840 1-0044: Configured audio system: automatic standard and mode detection cx25840 1-0044: Specified audio input: External cx25840 1-0044: Preferred audio mode: stereo cx25840 1-0044: Selected 65 MHz format: autodetect cx25840 1-0044: Selected 45 MHz format: chroma wm8739 1-001a: Frequency: 48000 Hz wm8739 1-001a: Volume L: 17 wm8739 1-001a: Volume R: 17 ivtv0: Video Input: Composite 1 ivtv0: Audio Input: Line In 1 ivtv0: Tuner: TV ivtv0: Stream: MPEG-2 Program Stream ivtv0: VBI Format: No VBI ivtv0: Video: 720x576, 25 fps ivtv0: Video: MPEG-2, 4x3, Variable Bitrate, 2000000, Peak 2500000 ivtv0: Video: GOP Size 15, 2 B-Frames, GOP Closure ivtv0: Audio: 48 kHz, Layer II, 224 kbps, Stereo, No Emphasis, No CRC ivtv0: Spatial Filter: Manual, Luma 1D Horizontal, Chroma 1D Horizontal, 0 ivtv0: Temporal Filter: Manual, 8 ivtv0: Median Filter: Off, Luma [0, 255], Chroma [0, 255] ivtv0: Status flags: 0x00200000 ivtv0: Stream encoder MPEG: status 0x0000, 0% of 4096 KiB (128 buffers) in use ivtv0: Stream encoder YUV: status 0x0000, 0% of 2046 KiB (194 buffers) in use ivtv0: Stream encoder VBI: status 0x0000, 0% of 1023 KiB (60 buffers) in use ivtv0: Stream encoder PCM audio: status 0x0000, 0% of 1021 KiB (227 buffers) in use ivtv0: Read MPEG/VBI: 0/0 bytes ivtv0: ================== END STATUS CARD #0 ================== Can I help with anything ? I can make some test/reports :) Thanks! В Втр, 14/08/2007 в 23:08 +0200, Hans Verkuil пишет: > > Sorry for interrupt, but can you tell me about any progress ? > > Thanks a lot ! > > Yes, this is a lot of progress. In fact, everything works except the > radio (that's in progress). > > You need the userspace-tuner from Markus Rechberger for the tuner > support: http://mcentral.de/hg/~mrec/userspace-tuner > > And my tree for the patched ivtv: > http://linuxtv.org/hg/~hverkuil/v4l-dvb-xc > > This weekend I'll be doing some more testing and I'll probably update my > v4l-dvb-xc tree to the latest userspace-tuner. > > There is a very good chance that all this will go into the 2.6.24 > kernel, provided the userspace-tuner code will go in as well. > > The normal mainline v4l-dvb tree also contains support for this card, > but not for the tuner input, only for Composite/S-Video input. > > Regards, > > Hans > > PS: if you have a follow-up question it might be a good idea to use the > ivtv-devel mailinglist: it's interesting for others as well. -- Abylai Ospan <[EMAIL PROTECTED]> NetUP Inc.
smime.p7s
Description: S/MIME cryptographic signature
_______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
