thanks, Michael ! (there was just a "t" missing in i2cdetect)

linvdr:~# i2cdetect -l
i2c-3   unknown         ivtv i2c driver #0                      Algorithm 
unavailable
i2c-2   unknown         B2C2 FlexCop device                     Algorithm 
unavailable
i2c-1   unknown         TT-Budget-C-CI PCI                      Algorithm 
unavailable
i2c-0   unknown         Fujitsu Siemens DVB-C                   Algorithm 
unavailable

o.k., the message still comes from the ivtv driver, although I am using the 
latest http://linuxtv.org/hg/~hverkuil/v4l-dvb which include some 
i2c-changes.

I think these lines in dmesg are strange:

[   43.937819] i2c-adapter i2c-2: SMBus Quick command not supported, can't 
probe for chips
[ 1713.184222] i2c-adapter i2c-3: sendbytes: error - bailout.
[ 1713.184263] msp3400' 3-0040: I/O error #0 (read 0x10/0x200)

complete ivtv log:
[   43.397905] ivtv:  Start initialization, version 1.1.0
[   43.402661] ivtv0: Initializing card #0
[   43.403285] ivtv0: Autodetected Hauppauge card (cx23416 based)
[   43.407412] ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [LNKB] -> GSI 10 
(level, low) -> IRQ 10
[   43.407853] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
[   43.511614] tveeprom 3-0050: Hauppauge model 32524, rev B248, serial# 
6771745
[   43.511973] tveeprom 3-0050: tuner model is LG TP18PSB11D (idx 48, type 29)
[   43.512088] tveeprom 3-0050: TV standards PAL(B/G) (eeprom 0x04)
[   43.512223] tveeprom 3-0050: audio processor is MSP3415 (idx 6)
[   43.512328] tveeprom 3-0050: decoder processor is SAA7115 (idx 19)
[   43.512435] tveeprom 3-0050: has no radio, has no IR receiver, has no IR 
transmitter
[   43.512547] ivtv0: Autodetected Hauppauge WinTV PVR-250
[   43.623812] tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #0)
[   43.937819] i2c-adapter i2c-2: SMBus Quick command not supported, can't 
probe for chips
[   43.952510] saa7115' 3-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv 
i2c driver #0)
[   44.097607] msp3400' 3-0040: MSP3415G-B8 found @ 0x80 (ivtv i2c driver #0)
[   44.107346] msp3400' 3-0040: MSP3415G-B8 supports nicam and radio, mode is 
autodetect and autoselect
[   44.129011] tuner-simple 3-0061: type set to 29 (LG PAL_BG (TPI8PSB11D))
[   44.129424] tuner 3-0061: type set to LG PAL_BG (TPI8PSB1
[   44.129869] ivtv0: Registered device video1 for encoder MPG (4096 kB)
[   44.133881] ivtv0: Registered device video32 for encoder YUV (2048 kB)
[   44.140680] ivtv0: Registered device vbi1 for encoder VBI (1024 kB)
[   44.141664] ivtv0: Registered device video24 for encoder PCM (320 kB)
[   44.142113] ivtv0: Initialized card #0: Hauppauge WinTV PVR-250
[   44.142341] ivtv:  End initialization
[   44.217407] lirc_dev: IR Remote Control driver registered, at major 61
[   44.229834] lirc_serial: no version for "lirc_unregister_plugin" found: 
kernel tainted.
[   44.757120] lirc_serial: auto-detected active low receiver
[   44.757141] lirc_dev: lirc_register_plugin: sample_rate: 0
[   49.027834] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
[   49.227604] ivtv0: Encoder revision: 0x02060039
[ 1713.184222] i2c-adapter i2c-3: sendbytes: error - bailout.
[ 1713.184263] msp3400' 3-0040: I/O error #0 (read 0x10/0x200)
[ 1877.015393] i2c /dev entries driver

_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel

Reply via email to