On Sunday 09 September 2007 09:45:08 Naraendira Kumar R.R. wrote:
> ivtv: Linux version: 2.6.20-16-generic SMP mod_unload 586
> ivtv: In case of problems please include the debug info between
> ivtv: the START INIT IVTV and END INIT IVTV lines, along with
> ivtv: any module options, when mailing the ivtv-users mailinglist.
> ivtv0: Unknown card: vendor/device: 4444/0016
> ivtv0: subsystem vendor/device: 1043/4b66
> ivtv0: cx23416 based
> ivtv0: Defaulting to Hauppauge WinTV PVR-150 card
> ivtv0: Please mail the vendor/device and subsystem vendor/device
> IDs and what kind of ivtv0: card you have to the ivtv-devel
> mailinglist (www.ivtvdriver.org) ivtv0: Prefix your subject line with
> [UNKNOWN CARD].
> ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> ivtv0: Encoder revision: 0x02050032
> ivtv0: Recommended firmware version is 0x02060039.
> ivtv0: Invalid EEPROM
> tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #0)
> tuner 2-0060: chip found @ 0xc0 (ivtv i2c driver #0)
> cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
> ivtv0: Registered device video0 for encoder MPEG (4 MB)
> ivtv0: Registered device video32 for encoder YUV (2 MB)
> ivtv0: Registered device vbi0 for encoder VBI (1 MB)
> ivtv0: Registered device video24 for encoder PCM audio (1 MB)
> ivtv0: Registered device radio0 for encoder radio
> ivtv0: i2c hardware 0x00000020 (wm8775) not found for command
> 0x4008646d! ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
It would be helpful if you mention which ivtv version you are using, and
which card you have (the brand and type).
Regards,
Hans
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
