Hi, the computer is from HP, a MediaCenter m7160n. The TV Tuner card is identified as Conexant Falcon II NTSC Video Capture in Windows XP MediaCenter.
The Linux version is Ubuntu 7.10. The actual ivtv is problematic because what it does disable the card in Windows. After booting Ubuntu, I can not use the card (or at least, I still not found a way for using it), and when re-booting in Windows, I must re-install the driver manually, reboot Windows and only after this second reboot the TV Tuner card will work properly. I have to do this double-reboot in Windows every time I wish to use it after running Linux. Here is the complete info from dmesg : [ 35.041061] ivtv: ==================== START INIT IVTV ==================== [ 35.041066] ivtv: version 1.0.0 (2.6.22-14-generic SMP mod_unload 586 ) loading [ 35.041138] ivtv0: Unknown card: vendor/device: 4444/0016 [ 35.041142] ivtv0: subsystem vendor/device: 1043/462e [ 35.041145] ivtv0: cx23416 based [ 35.041147] ivtv0: Defaulting to Hauppauge WinTV PVR-150 card [ 35.041149] ivtv0: Please mail the vendor/device and subsystem vendor/device IDs and what kind of [ 35.041152] ivtv0: card you have to the ivtv-devel mailinglist (www.ivtvdriver.org) [ 35.041154] ivtv0: Prefix your subject line with [UNKNOWN CARD]. [ 35.043732] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 35.043745] ivtv0: Unreasonably low latency timer, setting to 64 (was 32) [ 35.702549] ivtv0: loaded v4l-cx2341x-enc.fw firmware (4148216056 bytes) [ 35.918200] ivtv0: Encoder revision: 0x02050032 [ 35.918202] ivtv0: Recommended firmware version is 0x02060039. [ 35.927113] tveeprom 0-0050: Huh, no eeprom present (err=-121)? [ 35.927118] tveeprom 0-0050: Encountered bad packet header [00]. Corrupt or not a Hauppauge eeprom. [ 35.927121] ivtv0: Invalid EEPROM [ 35.946197] tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0) [ 35.946236] tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner) [ 35.949816] tuner 0-0060: All bytes are equal. It is not a TEA5767 [ 35.949819] tuner 0-0060: chip found @ 0xc0 (ivtv i2c driver #0) [ 35.983924] cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) [ 39.200990] cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382 bytes) [ 39.366003] ivtv0: i2c hardware 0x00000020 (wm8775) not found for command 0x4008646d! [ 39.513525] tuner 0-0060: tuner type not set [ 39.629855] ivtv0: Registered device video0 for encoder MPEG (4 MB) [ 39.630032] ivtv0: Registered device video32 for encoder YUV (2 MB) [ 39.630244] ivtv0: Registered device vbi0 for encoder VBI (1 MB) [ 39.630332] ivtv0: Registered device video24 for encoder PCM audio (1 MB) [ 39.630567] ivtv0: Registered device radio0 for encoder radio [ 39.631521] tuner 0-0060: tuner type not set [ 39.651880] ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 [ 39.651912] ivtv: ==================== END INIT IVTV ==================== Is there at least a way of not disabling the card in Windows when booting Ubuntu ? Jacques Bourdeau _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
