Hi Jeremy,
Please try the latest cx18 driver and if it doesn't work, then mail me
the precise memory chip used on your card. Also mail the output of the
tveeprom module that you get when loading the driver.
Regards,
Hans
On Sunday 30 December 2007 02:56, Jeremy A. Hudnall wrote:
> Hi,
> I am having some problems getting this HVR 1600 working with the new
> beta drivers. First let me get some info for you.
>
> Kernel version: 2.6.22-14-generic
> Distro: Ubuntu Gutsy 7.10
>
> Here is some commands I have ran trying to see what is going on.
>
> [EMAIL PROTECTED]:~$ cat /dev/video16 > tst.mpg
> cat: /dev/video16: No such device or address
>
> [EMAIL PROTECTED]:~$ cat /dev/video0 > tst.mpg
> cat: /dev/video0: No such device or address
>
> [EMAIL PROTECTED] :~$ lspci | grep video
>
> 03:02.0 Multimedia video controller: Conexant CX23418 Single-Chip
> MPEG-2 Encoder with Integrated Analog Video/Broadcast Audio Decoder
>
> [EMAIL PROTECTED]:~$ modprobe -v cx18
>
> I think it is odd that the above modprobe does not output anything.
> Is it supposed to print something?
>
> [EMAIL PROTECTED] :~$ dmesg | grep cx18
> [ 52.705719] cx18: Start initialization, version 0.1.0
> [ 52.705794] cx18-0: Initializing card #0
> [ 52.705799] cx18-0: Autodetected Hauppauge card
> [ 52.706086] cx18-0: cx23418 revision 01010000 (B)
> [ 52.856064] cx18-0: Autodetected Hauppauge HVR-1600
> [ 53.028634] tuner 1-0061: chip found @ 0xc2 (cx18 i2c driver #0-1)
> [ 53.028684] cs5345 0-004c: chip found @ 0x98 (cx18 i2c driver
> #0-0) [ 53.031479 ] cx18-0: Disabled encoder IDX device
> [ 53.031540] cx18-0: Registered device video0 for encoder MPEG (2
> MB) [ 53.031574] cx18-0: Registered device video16 for TS (2 MB) [
> 53.031607] cx18-0: Registered device video32 for encoder YUV (2 MB)
> [ 53.031646] cx18-0: Registered device vbi0 for encoder VBI (1 MB)
> [ 53.031681] cx18-0: Registered device video24 for encoder PCM
> audio (1 MB)
> [ 53.032891] cx18-0: Initialized card #0: Hauppauge HVR-1600
> [ 53.032925] cx18: End initialization
> [ 176.054655] cx18-0: Mismatch at offset 8130
> [ 176.054699] cx18-0: Retry loading firmware
> [ 176.092942] cx18-0: Mismatch at offset 8130
> [ 176.093003] cx18-0: Failed to initialize on minor 0
> [ 178.322270] cx18-0: Failed to initialize on minor 0
> [ 331.134016] cx18-0: Failed to initialize on minor 0
> [ 399.633871] cx18-0: Failed to initialize on minor 0
> [ 772.030026] cx18-0: Failed to initialize on minor 0
> [ 849.635194] cx18-0: Failed to initialize on minor 32
> [ 885.339320] cx18-0: Failed to initialize on minor 0
> [ 901.762636] cx18-0: Failed to initialize on minor 0
> [ 1631.775526] cx18-0: Failed to initialize on minor 0
> [ 1862.017339] cx18-0: Failed to initialize on minor 16
> [ 2949.709601] cx18-0: Failed to initialize on minor 16
> [ 2953.371977] cx18-0: Failed to initialize on minor 0
> [EMAIL PROTECTED]:~$
>
> Also my agp nvidia 6800gs video card does not want to work with
> either the nv or nvidia drivers now. I think this started after
> installing or "messng" around with the cx18 drivers.
>
> I also put the windows haupuage firmware in the /lib/firmware
> directory and renamed them as in the how to. I am not sure if this is
> the exact location those are supposed to be or not.
>
>
> regards, JEremy
>
>
>
>
> _______________________________________________
> ivtv-devel mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-devel
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
