On ma, 2008-01-28 at 23:12 -0600, ted r lowe wrote: > What am i missing or this card not supported ? > > i thought i had found the solution here, but i think the article is > outdated and no longer necessary with 2.6.22 kernel: > http://mythtv.org/wiki/index.php/AVerMedia_M150-D
The link you post is for a card supported by the cx88 cx88-blackbird driver not ivtv. But you do have a ivtv based card looking at the ivtv init. Ivtv defaults to a Haupauge WinTV pvr 150 if it does not recognize the card. You can override this by setting the cardtype manually and see if one of them makes the card work. Example: modprobe ivtv cardtype=4 To see a list of types do modinfo ivtv (there are 24). If you get it to work please post the ivtv init and report if everything works. This includes the radio and any other video input it may have. Thanks Sander > MythBuntu 7.10, Compaq P4 1.6Mhz P4 > Linux jp4 2.6.22-14-generic #1 SMP Sun Oct 14 23:05:12 GMT 2007 i686 > GNU/Linux > Card is listed here: http://www.bttv-gallery.de/ (AverMedia UltraTV > 1500 MCE) > > [ 38.206472] ivtv: ==================== START INIT IVTV > ==================== > [ 38.206479] ivtv: version 1.0.0 (2.6.22-14-generic SMP mod_unload > 586 ) loading > [ 38.206644] ivtv0: Unknown card: vendor/device: 4444/0016 > [ 38.206650] ivtv0: subsystem vendor/device: 1461/c035 > [ 38.206654] ivtv0: cx23416 based > [ 38.206657] ivtv0: Defaulting to Hauppauge WinTV PVR-150 card > [ 38.206660] ivtv0: Please mail the vendor/device and subsystem > vendor/device IDs and what kind of > [ 38.206664] ivtv0: card you have to the ivtv-devel mailinglist > (www.ivtvdriver.org) > [ 38.206668] ivtv0: Prefix your subject line with [UNKNOWN CARD]. > [ 38.206734] ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 21 (level, > low) -> IRQ 21 > [ 38.407164] input: ImPS/2 Logitech Wheel Mouse > as /class/input/input3 > [ 38.411107] parport_pc 00:07: reported by Plug and Play ACPI > [ 38.411174] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 > [PCSPP,TRISTATE,COMPAT,ECP,DMA] > [ 38.901221] ivtv0: loaded v4l-cx2341x-enc.fw firmware (3709054608 > bytes) > [ 39.114828] ivtv0: Encoder revision: 0x02050032 > [ 39.114834] ivtv0: Recommended firmware version is 0x02060039. > [ 39.132443] tveeprom 0-0050: Huh, no eeprom present (err=-121)? > [ 39.132450] tveeprom 0-0050: Encountered bad packet header [00]. > Corrupt or not a Hauppauge eeprom. > [ 39.132455] ivtv0: Invalid EEPROM > [ 39.169625] tuner 0-0060: TEA5767 detected. > [ 39.169631] tuner 0-0060: chip found @ 0xc0 (ivtv i2c driver #0) > [ 39.169685] tuner 0-0060: type set to 62 (Philips TEA5767HN FM > Radio) > [ 39.169932] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) > [ 39.215497] cx25840 0-0044: cx25841-23 found @ 0x88 (ivtv i2c > driver #0) > [ 42.703693] cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382 > bytes) > [ 42.884966] ivtv0: i2c hardware 0x00000020 (wm8775) not found for > command 0x4008646d! > [ 43.036097] tuner 0-0061: tuner type not set > [ 43.156485] ivtv0: Registered device video0 for encoder MPEG (4 MB) > [ 43.157055] ivtv0: Registered device video32 for encoder YUV (2 MB) > [ 43.157622] ivtv0: Registered device vbi0 for encoder VBI (1 MB) > [ 43.158015] ivtv0: Registered device video24 for encoder PCM audio > (1 MB) > [ 43.158669] ivtv0: Registered device radio0 for encoder radio > [ 43.159915] tuner 0-0061: tuner type not set > [ 43.182028] ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 > [ 43.182247] ivtv: ==================== END INIT IVTV > ==================== _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
