Peter Stoffberg wrote: > lspci -nnv > > 06:09.0 Multimedia video controller [0400]: Conexant CX23418 Single-Chip > MPEG-2 Encoder with Integrated Analog Video/Broadcast Audio Decoder > [14f1:5b7a] > Subsystem: Toshiba America Info Systems Unknown device [1179:0110] > Flags: bus master, medium devsel, latency 64, IRQ 20 > Memory at f4000000 (32-bit, non-prefetchable) [size=64M] > Capabilities: <access denied>
The 1179:0110 appears to be a Toshiba TTV500x PCI DVB-T/Analog Hybrid Tuner card. As Hans said about this card in January: > [...] unlikely to work without me knowing a lot more > about the hardware involved. Basically I need to have detailed pictures > + chip model numbers of the hardware: which tuner is used, which memory > chips are used, which other audio or whatever chips are used... > > So you would have to open up your laptop and do all this first. And it > might be that there are some chips for which I have no datasheet, in > which case it's never going to work. > > Regards, > > Hans If you have the *.inf file from the Windows driver, it can give clues as to how the CX23418 inputs are wired up, the I2C addresses used on the card, and maybe even GPIO settings and DDR configuration settings. So one could get started a card entry for this card in the cx18 driver. (BTW, Toshiba's EULA for the driver software, and I suppose the *.inf file too, looks a little unfriendly for those who wish to glean data from it.) However, you'd still need to physically look at the card to determine the audio digitizer/multiplexer chip (CS5345 or something else) and the analog and digital tuners in use. > [EMAIL PROTECTED]:~$ cat /var/log/dmesg | grep ivtv > [ 18.016000] cx18-0: card you have to the ivtv-devel mailinglist > (www.ivtvdriver.org) > [EMAIL PROTECTED]:~$ cat /var/log/dmesg | grep cx18 > [ 18.016000] cx18: Start initialization, version 0.1.0 > [ 18.016000] cx18-0: Initializing card #0 > [ 18.016000] cx18-0: Unknown card: vendor/device: 14f1/5b7a > [ 18.016000] cx18-0: subsystem vendor/device: 1179/0110 > [ 18.016000] cx18-0: Defaulting to Hauppauge HVR-1600 card > [ 18.016000] cx18-0: Please mail the vendor/device and subsystem > vendor/device IDs and what kind of > [ 18.016000] cx18-0: card you have to the ivtv-devel mailinglist > (www.ivtvdriver.org) > [ 18.016000] cx18-0: Prefix your subject line with [UNKNOWN CX18 CARD]. > [ 18.016000] cx18-0: cx23418 revision 01010000 (B) > [ 18.176000] cx18-0: Invalid EEPROM > [ 37.724000] cs5345 0-004c: chip found @ 0x98 (cx18 i2c driver #0-0) > [ 37.724000] cx18-0: Disabled encoder IDX device > [ 37.724000] cx18-0: Registered device video0 for encoder MPEG (2 MB) > [ 37.724000] cx18-0: Registered device video16 for TS (1 MB) > [ 37.724000] cx18_reg_dev() Calling DVB Register > [ 37.724000] cx18_dvb_register() > [ 37.724000] DVB: registering new adapter (cx18) > [ 38.084000] cx18: frontend initialization failed > [ 38.084000] cx18_reg_dev() DVB failed to register > [ 38.084000] cx18-0: Registered device video32 for encoder YUV (2 MB) > [ 38.084000] cx18-0: Registered device vbi0 for encoder VBI (1 MB) > [ 38.084000] cx18-0: Registered device video24 for encoder PCM audio > (1 MB) > [ 38.084000] cx18-0: Registered device radio0 for encoder radio > [ 38.084000] cx18-0: Initialized card #0: Hauppauge HVR-1600 > [ 38.084000] cx18: End initialization Please don't use a simple grep to report information. Please provide all lines between "Start Initialization" and "End Initialization". -Andy _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
