Hans Verkuil wrote > Note that I have updated the cx18 driver to autodetect the Yuan MPC718, > so that should make life a bit easier.
Given the contents of the Windows *inf file for the MPC718, I suspect the video/audio input settings are more like the ones ivtv uses for the MPC622 than the ones you chose. > If the firmware refuses to load, then try replacing the .ddr settings in > the mpc718 setup in cx18-cards.c with the values for the Samsung memory > chip (from cx18_card_hvr1600_samsung) or with the values for the > EtronTech memory chip (from cx18_card_h900). If we are lucky then one > of these will work. If none of these work, then the box really must be > opened. BTW a (poor) picture of the MPC718 is here: http://www.yuan.com.tw/en/products/tuner/productscontent3.htm#min Given the picture, an XC[32]028 tuner makes sense, if it is actually hosted on the card an not somewhere else in the machine. Regards, Andy > Regards, > > Hans _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
