Hello Sander Sander Sweers wrote: > On Tue, May 13, 2008 at 1:50 PM, <[EMAIL PROTECTED]> wrote: >> As far as I can see in drivers/media/video/ivtv/ivtv-cards.c there might >> be a chance of getting this to run, since both the tuner (XC2028) and >> the MPEG2 Encoder (CX23416) seem to be supported by IVTV for other cards. > > You can try to override the tuner by adding a module option to ivtv. > Try loading it with tuner=71 and see if this makes it work. It might > need more work than that but this is the easiest.
Thanks a lot for the hint. I tried loading the ivtv module (remotely) with the option/parameter you suggested and added a "cardtype" parameter as well, which made most warnings disappear. Only ivtv0: i2c addr 0x21 not found for command 0x4008646f remains, which does not look too bad (maybe I am wrong here...). Currently I have no physical access to the machine with the capture card, but I will connect a video source when I get there and do more experiments. I'll let you and the mailing list know about the results as soon as possible. Thanks again, Peter > Greets > Sander > >> ============================================================== >> relevant sections from "dmesg" >> ============================================================== >> [ 0.000000] Linux version 2.6.25.3-pkb ([EMAIL PROTECTED]) (gcc version >> 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Mon May 12 18:53:18 JST 2008 >> ...skip... >> [ 34.535451] agpgart: Detected VIA CLE266 chipset >> [ 34.536713] agpgart: AGP aperture is 4M @ 0xea000000 >> [ 34.812244] Linux video capture interface: v2.00 >> [ 35.730306] ivtv: Start initialization, version 1.2.0 >> [ 35.731953] ivtv0: Initializing card #0 >> [ 35.732032] ivtv0: Unknown card: vendor/device: 4444/0016 >> [ 35.732099] ivtv0: subsystem vendor/device: 1154/052b >> [ 35.732168] ivtv0: cx23416 based >> [ 35.732228] ivtv0: Defaulting to Hauppauge WinTV PVR-150 card >> [ 35.732299] ivtv0: Please mail the vendor/device and subsystem >> vendor/device IDs and what kind of >> [ 35.732388] ivtv0: card you have to the ivtv-devel mailinglist >> (www.ivtvdriver.org) >> [ 35.732469] ivtv0: Prefix your subject line with [UNKNOWN IVTV CARD]. >> [ 35.802255] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LNKB] -> GSI >> 10 (level, low) -> IRQ 10 >> [ 35.802433] ivtv0: Unreasonably low latency timer, setting to 64 (was 32) >> [ 36.787796] tveeprom 1-0050: Encountered bad packet header [ff]. >> Corrupt or not a Hauppauge eeprom. >> [ 36.787899] ivtv0: Invalid EEPROM >> [ 37.986916] input: Power Button (FF) as /class/input/input4 >> [ 38.014101] ACPI: Power Button (FF) [PWRF] >> [ 38.021253] input: Power Button (CM) as /class/input/input5 >> [ 38.054021] ACPI: Power Button (CM) [PWRB] >> [ 43.399074] cx25840 1-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #0) >> [ 43.409132] wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) >> [ 43.412483] wm8775 1-001b: I2C: cannot write 000 to register R23 >> [ 43.415824] wm8775 1-001b: I2C: cannot write 000 to register R7 >> [ 43.419118] wm8775 1-001b: I2C: cannot write 021 to register R11 >> [ 43.422431] wm8775 1-001b: I2C: cannot write 102 to register R12 >> [ 43.425741] wm8775 1-001b: I2C: cannot write 000 to register R13 >> [ 43.429135] wm8775 1-001b: I2C: cannot write 1d4 to register R14 >> [ 43.432443] wm8775 1-001b: I2C: cannot write 1d4 to register R15 >> [ 43.455893] wm8775 1-001b: I2C: cannot write 1bf to register R16 >> [ 43.506726] wm8775 1-001b: I2C: cannot write 185 to register R17 >> [ 43.572995] wm8775 1-001b: I2C: cannot write 0a2 to register R18 >> [ 43.630442] wm8775 1-001b: I2C: cannot write 005 to register R19 >> [ 43.688818] wm8775 1-001b: I2C: cannot write 07a to register R20 >> [ 43.798126] wm8775 1-001b: I2C: cannot write 102 to register R21 >> [ 43.834579] ivtv0: Registered device video0 for encoder MPG (4096 kB) >> [ 43.847960] ivtv0: Registered device video32 for encoder YUV (2048 kB) >> [ 43.854508] ivtv0: Registered device vbi0 for encoder VBI (1024 kB) >> [ 43.861131] ivtv0: Registered device video24 for encoder PCM (320 kB) >> [ 43.875737] ivtv0: Registered device radio0 for encoder radio >> [ 43.875819] ivtv0: Initialized card #0: Hauppauge WinTV PVR-150 >> [ 43.882291] ivtv: End initialization >> [ 44.183080] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI >> 11 (level, low) -> IRQ 11 >> [ 44.328232] fb0: VIA VT8623 on 0000:01:00.0, 16 MB RAM >> [ 45.301070] parport_pc 00:0b: reported by Plug and Play ACPI >> [ 45.301180] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] >> ...skip... >> [ 73.898006] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) >> [ 73.898037] apm: overridden by ACPI. >> [ 74.505237] ppdev: user-space parallel port driver >> [ 75.544316] Clocksource tsc unstable (delta = -69390330 ns) >> [ 78.972664] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) >> [ 79.169899] ivtv0: Encoder revision: 0x02060039 >> [ 82.973240] cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes) >> [ 83.144925] wm8775 1-001b: I2C: cannot write 0c0 to register R21 >> [ 83.150816] wm8775 1-001b: I2C: cannot write 1d4 to register R14 >> [ 83.156603] wm8775 1-001b: I2C: cannot write 1d4 to register R15 >> [ 83.162395] wm8775 1-001b: I2C: cannot write 102 to register R21 >> [ 83.224920] wm8775 1-001b: I2C: cannot write 0c0 to register R21 >> [ 83.230734] wm8775 1-001b: I2C: cannot write 1d4 to register R14 >> [ 83.236512] wm8775 1-001b: I2C: cannot write 1d4 to register R15 >> [ 83.242318] wm8775 1-001b: I2C: cannot write 102 to register R21 >> [ 83.271840] wm8775 1-001b: I2C: cannot write 0c0 to register R21 >> [ 83.277625] wm8775 1-001b: I2C: cannot write 1d4 to register R14 >> [ 83.283436] wm8775 1-001b: I2C: cannot write 1d4 to register R15 >> [ 83.289213] wm8775 1-001b: I2C: cannot write 108 to register R21 >> [ 83.366955] wm8775 1-001b: I2C: cannot write 0c0 to register R21 >> [ 83.372946] wm8775 1-001b: I2C: cannot write 1d4 to register R14 >> [ 83.378749] wm8775 1-001b: I2C: cannot write 1d4 to register R15 >> [ 83.384511] wm8775 1-001b: I2C: cannot write 102 to register R21 >> [ 84.557735] ADDRCONF(NETDEV_UP): wlan0: link is not ready >> [ 84.627866] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 >> ...skip... >> >> >> ============================================================== >> # lspci -vvv >> ============================================================== >> ...skip... >> 00:14.0 Multimedia video controller: Internext Compression Inc iTVC16 >> (CX23416) MPEG-2 Encoder (rev 01) >> Subsystem: Melco Inc Unknown device 052b >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- >> Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 32 bytes >> Interrupt: pin A routed to IRQ 10 >> Region 0: Memory at e4000000 (32-bit, prefetchable) [size=64M] >> Capabilities: [44] Power Management version 2 >> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >> PME(D0-,D1-,D2-,D3hot-,D3cold-) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> ...skip... >> >> >> ============================================================== >> # lspci -vvv -nn >> ============================================================== >> ...skip... >> 00:14.0 Multimedia video controller [0400]: Internext Compression Inc >> iTVC16 (CX23416) MPEG-2 Encoder [4444:0016] (rev 01) >> Subsystem: Melco Inc Unknown device [1154:052b] >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- >> Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 32 bytes >> Interrupt: pin A routed to IRQ 10 >> Region 0: Memory at e4000000 (32-bit, prefetchable) [size=64M] >> Capabilities: [44] Power Management version 2 >> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >> PME(D0-,D1-,D2-,D3hot-,D3cold-) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> ...skip... >> >> >> >> _______________________________________________ >> ivtv-devel mailing list >> [email protected] >> http://ivtvdriver.org/mailman/listinfo/ivtv-devel >> > > _______________________________________________ > ivtv-devel mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-devel _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
