On Fri, 2008-08-29 at 18:48 -0400, Andy Walls wrote: > On Fri, 2008-08-29 at 13:58 -0600, Warren Sturm wrote: > > On Fri, 2008-08-29 at 15:01 -0400, Andy Walls wrote: > > > Hi all, > > > > > > I have a question. > > > > > > For users of HVR-1600 and other CX23418 based cards that basically work: > > > is your card behind a PCI-PCI bridge chip that is set for "subtractive > > > decode"? > > Hope this is what you are after: > > > > # lspci -tvv > > -[0000:00]-+-00.0 nVidia Corporation nForce3 250Gb Host Bridge > > +-01.0 nVidia Corporation nForce3 250Gb LPC Bridge > > +-01.1 nVidia Corporation nForce 250Gb PCI System Management > > +-02.0 nVidia Corporation CK8S USB Controller > > +-02.1 nVidia Corporation CK8S USB Controller > > +-02.2 nVidia Corporation nForce3 EHCI USB 2.0 Controller > > +-05.0 nVidia Corporation CK8S Ethernet Controller > > +-06.0 nVidia Corporation nForce3 250Gb AC'97 Audio Controller > > +-08.0 nVidia Corporation CK8S Parallel ATA Controller (v2.5) > > +-0a.0 nVidia Corporation CK8S Serial ATA Controller (v2.5) > > +-0b.0-[0000:01]----00.0 nVidia Corporation G70 [GeForce 7800 > > GS] > > +-0e.0-[0000:02]--+-07.0 Internext Compression Inc iTVC16 > > (CX23416) MPEG-2 Encoder > > | +-08.0 Creative Labs SB Live! EMU10k1 > > | +-08.1 Creative Labs SB Live! Game Port > > | +-0a.0 Conexant CX23418 Single-Chip MPEG-2 > > Encoder with Integrated Analog Video/Broadcast Audio Decoder > > | +-0b.0 Marvell Technology Group Ltd. 88E8001 > > Gigabit Ethernet Controller > > | +-0d.0 Silicon Image, Inc. SiI 3512 > > [SATALink/SATARaid] Serial ATA Controller > > | \-0e.0 Texas Instruments TSB82AA2 IEEE-1394b > > Link Layer Controller > > +-18.0 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] > > HyperTransport Technology Configuration > > +-18.1 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] > > Address Map > > +-18.2 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM > > Controller > > \-18.3 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] > > Miscellaneous Control > > > > > > # lspci -s 0:0e.0 -vv -x > > 00:0e.0 PCI bridge: nVidia Corporation nForce3 250Gb PCI-to-PCI Bridge (rev > > a2) (prog-if 00 [Normal decode]) > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > > Stepping- SERR+ FastB2B- DisINTx- > > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- > > <MAbort- >SERR- <PERR- INTx- > > Latency: 0 > > Bus: primary=00, secondary=02, subordinate=02, sec-latency=128 > > I/O behind bridge: 00009000-0000afff > > Memory behind bridge: d8000000-dfffffff > > Prefetchable memory behind bridge: e0000000-e3ffffff > > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- > > <TAbort- <MAbort+ <SERR- <PERR+ > > BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > > Kernel modules: shpchp > > 00: de 10 ed 00 07 01 a0 00 a2 00 04 06 00 00 01 00 > > 10: 00 00 00 00 00 00 00 00 00 02 02 80 90 a0 80 a2 > > 20: 00 d8 f0 df 00 e0 f0 e3 00 00 00 00 00 00 00 00 > > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 00 > > Yes, almost. > > Does your card work for you in this configuration behind a bridge in > Normal decode? > > Regards, > Andy
Yes. This card works. I use it with mythtv. _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
