This card is from a Vaio PCV-RZ44G Here is the info i got off the actual card
Sony(R) MPEG Realtime Encoder Board BTF-PA4012Z
This is running 8.04 MythUbuntu will all latest updates.
lspci
03:09.0 Multimedia video controller: Internext Compression Inc iTVC16
(CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Sony Corporation Unknown device 813d
Flags: bus master, medium devsel, latency 64, IRQ 21
Memory at f0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
dmesg
[ 27.552589] ivtv: Start initialization, version 1.1.0
[ 27.552764] ivtv0: Initializing card #0
[ 27.552774] ivtv0: Unknown card: vendor/device: 4444/0016
[ 27.552777] ivtv0: subsystem vendor/device: 104d/813d
[ 27.552779] ivtv0: cx23416 based
[ 27.552781] ivtv0: Defaulting to Hauppauge WinTV PVR-150 card
[ 27.552783] ivtv0: Please mail the vendor/device and subsystem
vendor/device IDs and what kind of
[ 27.552786] ivtv0: card you have to the ivtv-devel mailinglist
(www.ivtvdriver.org)
[ 27.552788] ivtv0: Prefix your subject line with [UNKNOWN CARD].
[ 27.664547] ivtv0: Invalid EEPROM
[ 27.856820] tuner 0-0060: chip found @ 0xc0 (ivtv i2c driver #0)
[ 28.039080] ivtv0: Registered device video0 for encoder MPG (4096 kB)
[ 28.039103] ivtv0: Registered device video32 for encoder YUV (2048 kB)
[ 28.039125] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
[ 28.039144] ivtv0: Registered device video24 for encoder PCM (320 kB)
[ 28.039162] ivtv0: Registered device radio0 for encoder radio
[ 28.039164] ivtv0: Initialized card #0: Hauppauge WinTV PVR-150
[ 28.039182] ivtv: End initialization
[ 46.364342] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
[ 46.563418] ivtv0: Encoder revision: 0x02060039
[ 46.563426] ivtv0: i2c addr 0x44 not found for command 0xc008561c
[ 46.563431] ivtv0: i2c addr 0x44 not found for command 0x4008646f
[ 46.563435] ivtv0: i2c hardware 0x00000020 (wm8775) not found for
command 0x4008646d
[ 46.563438] ivtv0: i2c hardware 0x00000001 (cx2584x) not found for
command 0x4008646d
[ 46.564568] ivtv0: i2c hardware 0x00000020 (wm8775) not found for
command 0x4008646d
[ 46.564572] ivtv0: i2c hardware 0x00000001 (cx2584x) not found for
command 0x4008646d
[ 46.567639] ivtv0: i2c hardware 0x00000020 (wm8775) not found for
command 0x4008646d
[ 46.567643] ivtv0: i2c hardware 0x00000001 (cx2584x) not found for
command 0x4008646d
[ 46.633281] ivtv0: i2c addr 0x44 not found for command 0xc0445624
[ 46.633319] ivtv0: i2c addr 0x44 not found for command 0xc008561c
Any other information that is needed please let me know.
Thanks
Jeremy
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
