old kernel 2.5.25:
ivtv: Start initialization, version 1.2.0 ivtv0: Initializing card #0 ivtv0: Autodetected Hauppauge card (cx23416 based) ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 17 (level, low) -> IRQ 17 ivtv0: Unreasonably low latency timer, setting to 64 (was 32) tveeprom 1-0050: Hauppauge model 23559, rev D591, serial# 8228089 tveeprom 1-0050: tuner model is Philips FQ1216AME MK4 (idx 91, type 56) tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 1-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) tveeprom 1-0050: audio processor is CX25843 (idx 37) tveeprom 1-0050: decoder processor is CX25843 (idx 30) tveeprom 1-0050: has radio, has no IR receiver, has no IR transmitter ivtv0: Autodetected WinTV PVR 500 (unit #1) cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) tuner 1-0060: chip found @ 0xc0 (ivtv i2c driver #0) tea5767 1-0060: type set to Philips TEA5767HN FM Radio tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0) tda9887 1-0043: tda988[5/6/7] found tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) tuner-simple 1-0061: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes) ivtv0: Registered device video0 for encoder MPG (4096 kB) ivtv0: Registered device video32 for encoder YUV (2048 kB) ivtv0: Registered device vbi0 for encoder VBI (1024 kB) ivtv0: Registered device video24 for encoder PCM (320 kB) ivtv0: Registered device radio0 for encoder radio ivtv0: Initialized card #0: WinTV PVR 500 (unit #1) ivtv1: Initializing card #1 ivtv1: Autodetected Hauppauge card (cx23416 based) ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 18 (level, low) -> IRQ 18 ivtv1: Unreasonably low latency timer, setting to 64 (was 32) tveeprom 2-0050: Hauppauge model 23559, rev D591, serial# 8228089 tveeprom 2-0050: tuner model is Philips FQ1216AME MK4 (idx 91, type 56) tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 2-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) tveeprom 2-0050: audio processor is CX25843 (idx 37) tveeprom 2-0050: decoder processor is CX25843 (idx 30) tveeprom 2-0050: has radio, has no IR receiver, has no IR transmitter ivtv1: Correcting tveeprom data: no radio present on second unit ivtv1: Autodetected WinTV PVR 500 (unit #2) cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #1) tda9887 2-0043: tda988[5/6/7] found tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1) wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1) tuner-simple 2-0061: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes) ivtv1: Registered device video1 for encoder MPG (4096 kB) ivtv1: Registered device video33 for encoder YUV (2048 kB) ivtv1: Registered device vbi1 for encoder VBI (1024 kB) ivtv1: Registered device video25 for encoder PCM (320 kB) ivtv1: Initialized card #1: WinTV PVR 500 (unit #2) ivtv: End initialization some git commands make oldconfig lots of enters new kernel 2.6.27.10: ivtv: Start initialization, version 1.4.0 ivtv0: Initializing card #0 ivtv0: Unknown card: vendor/device: 4444/0016 ivtv0: subsystem vendor/device: ffff/ffff ivtv0: cx23416 based ivtv0: Defaulting to Hauppauge WinTV PVR-150 card ivtv0: Please mail the vendor/device and subsystem vendor/device IDs and what kind of ivtv0: card you have to the ivtv-devel mailinglist (www.ivtvdriver.org) ivtv0: Prefix your subject line with [UNKNOWN IVTV CARD]. ivtv0: Cannot request encoder memory region on card 0. ivtv0: Error -5 on initialization ivtv: probe of 0000:02:09.0 failed with error -5 ivtv: End initialization Somehow I do not be leave the 'Unknown card' -- Hans _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
