On Mon, 2009-02-09 at 19:16 +1030, Greg wrote: > [ 9.802791] cx18-0: Unknown card: vendor/device: 14f1/5b7a > [ 9.802795] cx18-0: subsystem vendor/device: 107d/6690 > > > This is a Winfast DVR3100-H > It fails with initializing the front end. Has anyone had sucsess with this?
The latest cx18 driver in the v4l-dvb repo: http://linuxtv.org/hg/v4l-dvb/ should have a *preliminary* entry in cx18-cards.c for this device: static const struct cx18_card_pci_info cx18_pci_leadtek_pvr2100[] = { { PCI_DEVICE_ID_CX23418, CX18_PCI_ID_LEADTEK, 0x6f27 }, /* PVR2100 */ { PCI_DEVICE_ID_CX23418, CX18_PCI_ID_LEADTEK, 0x6690 }, /* DVR3100 H */ { 0, 0, 0 } }; static const struct cx18_card cx18_card_leadtek_pvr2100 = { .type = CX18_CARD_LEADTEK_PVR2100, .name = "Leadtek WinFast PVR2100/DVR3100 H", .comment = "Experimenters and photos needed for device to work well.\n" "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n", [...] Basic instructions are here: http://www.ivtvdriver.org/index.php/Cx18 But the XC3028 tuner chip is going to need an additional firmware file. (I don't know the details of obtaining that offhand.) Please test CVBS or SVideo in first. I welcome any feedback, as I'm sure things are broken with it. GPIO settings for controlling or resetting devices on the card, including the analog tuner are probably not right. Nor will digital tuning be enabled as I have no detail on the digital tuner and demodulator chips on the card. (I did find a high resolution picture of one on the internet so I can at least see the traces on one side of the card, but I could read the chip names given the lighting.) Regards, Andy > If thi sis the wrong list, please just treat this as details regarding > an unknown card as instruction in my dmesg > > Thanks, _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
