On Thu, 2009-05-21 at 09:09 +0200, Martin Dauskardt wrote:
> An owner of a PVR150 sent me the following dmesg:
>
> [ 133.929892] ivtv: Start initialization, version 1.4.1
> [ 133.929957] ivtv0: Initializing card 0
> [ 133.929958] ivtv0: Autodetected Hauppauge card (cx23416 based)
> [ 133.930478] ivtv 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 133.983973] tveeprom 3-0050: Hauppauge model 26709, rev F0C1, serial#
> 9585403
> [ 133.983975] tveeprom 3-0050: tuner model is Philips FQ1216LME MK5 (idx
> 121,
> type 4)
> [ 133.983977] tveeprom 3-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L')
> PAL(D/D1/K) (eeprom 0x74)
> [ 133.983979] tveeprom 3-0050: audio processor is CX25843 (idx 37)
> [ 133.983981] tveeprom 3-0050: decoder processor is CX25843 (idx 30)
> [ 133.983982] tveeprom 3-0050: has no radio
> [ 133.983984] ivtv0: Autodetected Hauppauge WinTV PVR-150
> [ 133.983985] ivtv0: tveeprom cannot autodetect tuner!<6>cx25840 3-0044:
> cx25843-24 found @ 0x88 (ivtv i2c driver #0)
> [ 134.017173] tuner 3-0043: chip found @ 0x86 (ivtv i2c driver #0)
> [ 134.017227] tda9887 3-0043: creating new instance
> [ 134.017229] tda9887 3-0043: tda988[5/6/7] found
> [ 134.027029] tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> [ 134.034810] wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #0)
> [ 134.043300] ivtv0: Registered device video0 for encoder MPG (4096 kB)
> [ 134.043325] ivtv0: Registered device video32 for encoder YUV (2048 kB)
> [ 134.043349] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
> [ 134.043373] ivtv0: Registered device video24 for encoder PCM (320 kB)
> [ 134.043375] ivtv0: Initialized card: Hauppauge WinTV PVR-150
> [ 134.043389] ivtv: End initialization
> [ 134.059301] ivtvfb: no cards found
> [ 135.718015] ivtv 0000:04:00.0: firmware: requesting v4l-cx2341x-enc.fw
> [ 135.737552] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
> [ 135.937153] ivtv0: Encoder revision: 0x02060039
> [ 135.954204] cx25840 3-0044: firmware: requesting v4l-cx25840.fw
> [ 139.419227] cx25840 3-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
> [ 139.601289] tuner 3-0061: tuner type not set
> [ 139.641404] tuner 3-0061: tuner type not set
> [ 139.828975] tuner 3-0061: tuner type not set
>
> I never saw this.
We just had an identical problem on the ivtv lists with an HVR-1600 and
a TCL MNM05-04 tuner with the cx18 driver.
> Detection of the tuner model is o.k., so why does
> autodetection fail?
tveeprom.c can identify it, but tveeprom.c doesn't know what parameters
to tell the ivtv driver. It returns TUNER_ABSENT instead.
> What could be the problem?
>
> I looked into tveeprom.c:
>
> { TUNER_ABSENT, "Philips FQ1216LME MK5"},
This is the problem.
> Does this mean the tuner is not supported? Should we try "modprobe ivtv
> tuner=81" (this is the FQ1216LME MK3) ?
Yes. If 81 is the the FQ1216LME MK3, then this will likely work. Let
me know how the reception is, and I can get the entry changed in
tveeprom.c.
> By the way: There is a small bug in ivtv-driver.c.
> I think instead of
>
> if (tv.tuner_type == TUNER_ABSENT)
> IVTV_ERR("tveeprom cannot autodetect tuner!");
>
> it should be
>
> if (tv.tuner_type == TUNER_ABSENT)
> IVTV_ERR("tveeprom cannot autodetect tuner!\n");
>
> IVTV_ERR("Invalid EEPROM\n");
Yes. I just fixed this bug in the cx18 driver a week or so ago.
Regards,
Andy
> Greets,
> Martin
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
