On Thu, 2009-07-02 at 15:22 -0400, Andy Walls wrote:
> On Thu, 2009-07-02 at 18:45 +0100, Steve Firth wrote:
> >
> > Summary : I can watch DVB-T on the ACER Idea 500 using your last
> > repo
> >
>
> OK, good. I'll assemble a cleaned-up patch for the DVB-T and basic
> board support and have it pulled to the main v4l-dvb repository.
>
>
>
> > Is there any other verification that I need to do ? (EEPROM
> > notwithstanding, which I know you still want me to do)
> In the near future, I'll give you one more patch for the EEPROM dump, to
> see if I can get that right this time. :)
Steve,
I have pushed a patch to:
http://linuxtv.org/hg/~awalls/cx18-mpc718
to re-enable the eeprom dump on moudle load for the MPC718.
When you test this could you:
1. Add
options tveeprom debug=1
to your /etc/modprobe.conf (or whatever your distro uses).
2. 'make unload' to make sure the tveeprom module and all old v4l-dvb
modules are unloaded from memory.
3. Then load the cx18 module as you normally do. It will load the
tveeprom module on it's own, but this time the debug option will be set
for the tveeprom module.
I'd like to see what gets logged by both the tveeprom module and the
cx18 module when the cx18 driver is loaded. I can't see why my previous
effort to dump the MPC718 eeprom failed, so hopefully these messages
will give me more insight.
Thanks.
Regards,
Andy
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
