On Fri, Aug 28, 2009 at 03:40:07PM -0400, Andy Walls wrote: > On Fri, 2009-08-28 at 12:01 -0500, Chris Kennedy wrote: > > > If you can reproduce again, maybe use v4l2-dbg to dump the registers of > the cx25840 and compare the good and the bad cases. I suspect registers > in the 0x800-0x8ff range will jump out as being very different. It > won't explain the failure mode however...
I've got a script that I am running which checks for the oddity in audio subchannels and resets the audio input to 0 when not just mono. I put into that a v4l2-dbg command to dump the registers, so I should be able to catch the state of the registers to my log file when this happens. > > > Good - Available subchannels: mono > > Bad + Available subchannels: mono lang2 > > I wonder why stereo doesn't show up... It has once since I have been running my check script, on one interface (have 4, or 2 pvr500's). It went away when running the v4l2-ctl command and setting the audio input to 0. The input is a directv tuner box. Thanks, Chris > > Regards, > Andy > > > > Thanks, > > Chris > > > > > _______________________________________________ > ivtv-devel mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-devel -- Chris Kennedy [email protected] _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
