On Thu, 2009-10-08 at 19:59 +0500, Hiemanshu Sharma wrote: > Hello, > > I have an AverMedia Ultra 116 TV(M103) Card that uses ivtv module > (Auto detect by Fedora) > I am not able to get any display on it. Its not an hardware issue as > the card seems to be working just fine on Windows. > I tried to remove the AverMedia Sticker on the Tuner box and it read > FM1216, i couldn't see the rest as the sticker dint come out well. > > Here is the lspci message > > 01:07.0 Multimedia video controller [0400]: Internext Compression Inc > iTVC16 (CX23416) MPEG-2 Encoder [4444:0016] (rev 01) > > And here is the dmesg output while the computer boots. > > ivtv: Start initialization, version 1.4.1 > ivtv0: Initializing card 0 > ivtv0: Unknown card: vendor/device: [4444:0016] > ivtv0: subsystem vendor/device: [1461:c01b] > ivtv0: cx23416 based > ivtv0: Defaulting to Hauppauge WinTV PVR-150 card > ivtv0: Please mail the vendor/device and subsystem vendor/device IDs > and what kind of > ivtv0: card you have to the ivtv-devel mailinglist (www.ivtvdriver.org) > ivtv0: Prefix your subject line with [UNKNOWN IVTV CARD]. > ivtv 0000:01:07.0: PCI INT A -> Link[LNKC] -> GSI 16 (level, low) -> IRQ 16 > ivtv0: Invalid EEPROM > cx25840 2-0044: cx25842-23 found @ 0x88 (ivtv i2c driver #0) > tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #0) > tuner 2-0060: chip found @ 0xc0 (ivtv i2c driver #0) > wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0) > IRQ 16/ivtv0: IRQF_DISABLED is not guaranteed on shared IRQs > ivtv0: Registered device video0 for encoder MPG (4096 kB) > ivtv0: Registered device video32 for encoder YUV (2048 kB) > ivtv0: Registered device vbi0 for encoder VBI (1024 kB) > ivtv0: Registered device video24 for encoder PCM (320 kB) > ivtv0: Registered device radio0 for encoder radio > ivtv0: Initialized card: Hauppauge WinTV PVR-150 > ivtv: End initialization > ivtv 0000:01:07.0: firmware: requesting v4l-cx2341x-enc.fw > ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) > ivtv0: Encoder revision: 0x02060039 > > Please help me get it working and also let me know if you need any > more details at all.
Hiemanshu, Sorry for the long delay in replying. Your card is actually an AverMedia M113 variant. There is already an M113 card supported by ivtv with only a different tuner. Please try as root: # modprobe -r ivtv and # modprobe ivtv cardtype=27 tuner=38 (FM1216ME_MK3 tuner) or # modprobe ivtv cardtype=27 tuner=79 (FM1216MK5) and tell me which one performs better for you. I suspect the MK5 will. I can then update the card entry in ivtv-cards.c to add your card's tuner. The Philips FM1216ME tuner on your card can handle B/G, I, D/K, and L/L' TV systems. Your card is very similar to the version of the "AVerMedia UltraTV 1500 MCE" which is also based on the M113 design, but that card has an M/N TV system tuner. Regards, Andy _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
