Sergey,
On IRC you mentioned a problem of improper detection of SECAM-D/K with
the Leadtek PVR2100 (XC2028 and CX23418) from an RF source.
To investigate this problem on my own, I added SECAM support to the
saa7127 driver so a PVR-350 could generate a baseband SECAM signal for
me. The good news for me is that a PVR-350 (SAA7115 video decoder) and
HVR-1600 (CX23418 integrated video decoder) card both properly
recognized the output of the PVR-350 as SECAM. The bad news is I could
not reproduce your problem with this setup.
Could you please do the following and send me the output from the logs?
1. Unload the cx18 module, tuner-xc2028 module, and the other tuner
modules.
2. In /etc/modprobe.conf set the following
options tuner-xc2028 debug=1
options tuner debug=1
3. Then
# modprobe cx18 debug=0x33 <---- info, warn, ioctl, file
# v4l2-ctl -d /dev/video0 -i 0 <---- Tuner input
# v4l2-ctl -d /dev/video0 -s 18 <---- SECAM-D/K
# v4l2-ctl -d /dev/video0 -f <freq of good channel>
# v4l2-ctl -d /dev/video0 --log-status
And send the relevant output from dmesg and /var/log/messages,
preferably to the mailing list. I do not need the lines that begin
"cx18-0 encoder MPEG: VIDIOC_QUERYCTRL " if that makes the output
smaller.
Thanks,
Andy
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
