I'm trying to get a PVR150 working. I've been following the list for about a month now, and looked through all the archives back to October when work on the 150 just started.
I downloaded ivtv-0.3.2a from Chris Kennedy's site, and I'm trying to follow the instructions on http://www.byopvr.com/Sections+index-req-viewarticle-artid-6-page-2.html I'm getting hung up on the part where it says to extract the firmware for the card. When I run #./ivtvfwextract.pl pvr150_22_22292.exe I get the following error message: "./ivtvfwextract.pl: Can't open /tmp/ivtvex.4413/hcwpvrp2.sys: No such file or directory" I proceeded with compiling everything anyway, to see what would happen. It says I have an unknown card, and then defaults to the 250. The box says it's a WinTV-PVR-150 model 1045. Output of #dmesg | grep ivtv: ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.2.0 (rc3b) loading ivtv: Linux version: 2.6.9-1.6_FC2 686 REGPARM 4KSTACKS gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Unknown card: vendor/device: 4444/0016, subsystem vendor/device: 0070/8003 ivtv: Defaulting to WinTV PVR 250 card ivtv: Please mail the vendor/device and subsystem vendor/device IDs and what kind of ivtv: card you have to the ivtv-devel mailinglist: http://sourceforge.net/projects/ivtv ivtv: Prefix your subject line with [UNKNOWN CARD]. ivtv: Found an iTVC16 based chip ivtv: XXX PCI device: 0x0735 vendor: 0x1039 ivtv: i2c attach [client=tveeprom[0],ok] ivtv: Tuner Type 50, Tuner formats 0x00001000, Radio: yes, Model 0x008d1615, Revision 0x00000000 ivtv: NTSC tuner detected ivtv: Radio detected tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) Unable to open '/lib/modules/ivtv-fw-enc.bin'. ivtv: failed loading encoder firmware ivtv: Error loading firmware -3! ivtv: Error -3 initializing firmware. ivtv: Error -12 on initialization ivtv-iTVC15_16_mpg2_encoder_card: probe of 0000:00:09.0 failed with error -12 ivtv: ==================== END INIT IVTV ==================== I realize at this point that the 150 isn't completely supported yet, and that at this point in my installation there are probably several things gone horribly wrong, but if someone would be so kind as to point me in any direction possible, I'd appreciate it. Greg Haase ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/ _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
