Anduin Withers wrote:
If the kernel version works, yes. For me, at the moment , it does not. I can record all right, but at undefined moments i lose sound. i will initially record with sound, and after some recordings i lose sound. re-tuning to the tuned frequency will enable sound again.Ah, ok, so it might be that "opmode=1 works" report doesn't apply to
all ivtv-supported cards, right?
I don't know, I have three different types of cards, it seems to work on them. Then again simple always worked for me in the past. I was really hoping Chris or someone would chime in.
The i2c helpers modules must not clear the structs. That would kill any data filled by the v4l driver in step (b). Thats why some drivers clear the structs and some don't. And at least bttv must do (a) and (b) itself. Moving (a)+(b) into the msp3400 module isn't an option as not all bt878 cards have a msp3400 chip.
I hope the issues here are a bit more clear now ...
Ok, that actually makes sense (when viewing through the somewhat narrow requirements of ivtv it seemed a bit cumbersome). I'm pretty sure everyone would love to see the ivtv msp3400 variant die.
This problem reduced the FAF hugely. Until i switched back to the ivtv provided msp3400. No problem since then.
config: supermicro main board with 2 pvr250s. kernel: 2.6.10
Cheers,
Rudy
------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
