that looks fine, are you in the US? your card is NTSC what exactly is not working?
you may want to disable 4kstacks in your kernel also (requires kernel recompile).. though i haven't heard of it causing problems with pvr250's, just 150s -tmk --- [EMAIL PROTECTED] wrote: > Here is my debug information, can you help? I have > been trying to get > this Mythtv box running for a few days. Thanks in > advance!!! > > vtv: ==================== START INIT IVTV > ==================== > ivtv: version 0.1.10 > (0.1.10-48.4_pre2_ck100zz.rhfc2.at) loading > ivtv: Linux version: 2.6.10-1.9_FC2 686 REGPARM > 4KSTACKS gcc-3.3 > ivtv: In case of problems please include the debug > info > ivtv: between the START INIT IVTV and END INIT IVTV > lines when > ivtv: mailing the ivtv-devel mailinglist. > ivtv: Autodetected WinTV PVR 250 card > ivtv: Found an iTVC16 based chip > ACPI: PCI interrupt 0000:01:08.0[A] -> GSI 5 (level, > low) -> IRQ 5 > ivtv: pci: PCIBUS detected device: 0x2560 vendor: > 0x8086 > tveeprom: Hauppauge: model = 32032, rev = B182, > serial# = 2832305 > tveeprom: tuner = LG NTSC (newer TAPC series) (idx = > 82, type = 39) > tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = > 0x00001000) > tveeprom: audio_processor = MSP3440 (type = 11) > ivtv: i2c attach [client=tveeprom[1],ok] > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c > driver #0 > ivtv: i2c attach [client=(tuner unset),ok] > saa7115: starting probe for adapter ivtv i2c driver > #0 (0x10005) > saa7115: detecting saa7115 client on address 0x42 > saa7115: writing init values > ivtv: i2c attach [client=saa7115[1],ok] > saa7115: status: (1E) 0x89, (1F) 0xb1 > msp34xx: init: chip=MSP3448W-B3 +nicam +simple > +simpler +radio > mode=simple > ivtv: i2c attach [client=MSP3448W-B3,ok] > msp3410: daemon started > ivtv: Tuner Type 39, Tuner formats 0x00001000, > Radio: yes, Model > 0x00891612, Revision 0x00000000 > ivtv: NTSC tuner detected > ivtv: Radio detected > ivtv: Encoder revision: 0x02040024 > ivtv: Configuring WinTV PVR 250 card with 5 streams > ivtv: Create DMA stream 0 using 128 buffers of size > 32768 > ivtv: Create DMA stream 1 using 128 buffers of size > 32768 > ivtv: Create stream 2 using 128 buffers of size > 52224 > ivtv: Create DMA stream 3 using 128 buffers of size > 32768 > ivtv: Create stream 4 > ivtv: Setting Tuner 39 > tuner: type set to 39 (LG NTSC (newer TAPC series)) > by ivtv i2c driver > #0 > ivtv: Setting audio matrix to input 3, output 1 > ivtv: Switching standard to NTSC. > saa7115: decoder set norm NTSC > saa7115: set audio: 0x01 > ivtv: Initialized WinTV PVR 250, card #0 > ivtv: ==================== END INIT IVTV > ==================== > -- > > [EMAIL PROTECTED] > > > > ------------------------------------------------------- > The SF.Net email is sponsored by: Beat the > post-holiday blues > Get a FREE limited edition SourceForge.net t-shirt > from ThinkGeek. > It's fun and FREE -- well, > almost....http://www.thinkgeek.com/sfshirt > _______________________________________________ > ivtv-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/ivtv-devel > ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
