I'm having a problem getting my PVR 350 TV-OUT working .
After a clean boot the tv screen shows a pattern of horizontal grey lines with a hint of green; if I 'rmmod saa7127' and 'modprobe saa7127 test_image=1' I get the proper test pattern in colour; if I repeat without the test_image I get a heavier black and white with some NW-SE diagonals overlaid.....
Can anyone tell me what I'm missing?
My configuration is Linux 2.6.9 kernel originaly built as gentoo-r4. Many other packages have been hand built. I'm running ivtv-0.2.0-rc3d. Modules.conf and INIT shown below. I should probably add that I have an ATI mach 64 TV card as well; this shows up as /dev/video0 with the km module.
Charles
modules.conf:
### This file is automatically generated by modules-update # # Please do not edit this file directly. If you want to change or add # anything please take a look at the files in /etc/modules.d and read # the manpage for modules-update. # ### modules-update: start processing /etc/modules.d/aliases # Aliases to tell insmod/modprobe which modules to use
# Uncomment the network protocols you don't want loaded: # alias net-pf-1 off # Unix # alias net-pf-2 off # IPv4 # alias net-pf-3 off # Amateur Radio AX.25 # alias net-pf-4 off # IPX # alias net-pf-5 off # DDP / appletalk # alias net-pf-6 off # Amateur Radio NET/ROM # alias net-pf-9 off # X.25 # alias net-pf-10 off # IPv6 # alias net-pf-11 off # ROSE / Amateur Radio X.25 PLP # alias net-pf-19 off # Acorn Econet
alias char-major-10-175 agpgart alias char-major-10-200 tun alias char-major-108 ppp_generic alias /dev/ppp ppp_generic alias tty-ldisc-3 ppp_async alias tty-ldisc-14 ppp_synctty alias ppp-compress-21 bsd_comp alias ppp-compress-24 ppp_deflate alias ppp-compress-26 ppp_deflate
# Crypto modules (see http://www.kerneli.org/) alias loop-xfer-gen-0 loop_gen alias loop-xfer-3 loop_fish2 alias loop-xfer-gen-10 loop_gen alias cipher-2 des alias cipher-3 fish2 alias cipher-4 blowfish alias cipher-6 idea alias cipher-7 serp6f alias cipher-8 mars6 alias cipher-11 rc62 alias cipher-15 dfc2 alias cipher-16 rijndael alias cipher-17 rc5
# Support for i2c and lm_sensors alias char-major-89 i2c-dev
# Old nvidia support ... alias char-major-195 NVdriver alias /dev/nvidiactl char-major-195
### modules-update: end processing /etc/modules.d/aliases
### modules-update: start processing /etc/modules.d/alsa alias /dev/mixer snd-mixer-oss alias /dev/dsp snd-pcm-oss alias /dev/midi snd-seq-oss
# --- BEGIN: Generated by ALSACONF, do not edit. --- # --- ALSACONF verion 1.0.6 --- options snd device_mode=0666 alias snd-card-0 snd-au8820 alias sound-slot-0 snd-au8820 # --- END: Generated by ALSACONF, do not edit. ---
### modules-update: end processing /etc/modules.d/alsa
### modules-update: start processing /etc/modules.d/i386 alias parport_lowlevel parport_pc alias char-major-10-144 nvram alias binfmt-0064 binfmt_aout alias char-major-10-135 rtc
### modules-update: end processing /etc/modules.d/i386
### modules-update: start processing /etc/modules.d/mythtv alias char-major-81 videodev alias char-major-81-0 ivtv alias char-major-61 lirc_i2c options ivtv debug=1 tuner=1 tda9887=0 ivtv_pal=1 options saa7127 enable_output=1 output_select=0 alias char-major-81-1 bttv options tuner pal=1 options msp3400 once=1 simple=1 install ivtv /sbin/modprobe --ignore-install ivtv; /sbin/modprobe ivtv-fb add below ivtv msp3400 saa7115 tuner add above ivtv lirc_dev lirc_i2c
### modules-update: end processing /etc/modules.d/mythtv
### modules-update: start processing /etc/modules.d/svgalib probeall /dev/svga svgalib_helper
### modules-update: end processing /etc/modules.d/svgalib
### modules-update: start processing /etc/modules.d/x11-drm keep path[x11-drm]=/lib/modules/2.6.9-gentoo-r4/x11-drm
### modules-update: end processing /etc/modules.d/x11-drm
from syslog:
Jan 20 00:54:19 fiat ivtv: between the START INIT IVTV and END INIT IVTV lines when
Jan 20 00:54:19 fiat ivtv: mailing the ivtv-devel mailinglist.
Jan 20 00:54:19 fiat ivtv: Autodetected WinTV PVR 350 card
Jan 20 00:54:19 fiat ivtv: Found an iTVC15 based chip
Jan 20 00:54:19 fiat ivtv: Unreasonably low latency timer, setting to 64 (was 32)
Jan 20 00:54:19 fiat ivtv: XXX PCI device: 0x7100 vendor: 0x8086
Jan 20 00:54:19 fiat lirc_i2c: chip found @ 0x18 (Hauppauge IR)
Jan 20 00:54:19 fiat ivtv: i2c attach [client=Hauppauge IR,ok]
Jan 20 00:54:19 fiat lirc_dev: lirc_register_plugin:sample_rate: 10
Jan 20 00:54:19 fiat msp34xx: ivtv version
Jan 20 00:54:19 fiat msp34xx: init: chip=MSP3418W-A2, has NICAM support, simple (D) mode, simpler (G) no-thread mode
Jan 20 00:54:19 fiat msp34xx: $Id$ compiled on: Jan 10 2005 22:26:09
Jan 20 00:54:19 fiat ivtv: i2c attach [client=MSP3418W-A2,ok]
Jan 20 00:54:19 fiat saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
Jan 20 00:54:19 fiat saa7115: detecting saa7115 client on address 0x42
Jan 20 00:54:19 fiat saa7115: writing init values
Jan 20 00:54:19 fiat ivtv: i2c attach [client=saa7115[0],ok]
Jan 20 00:54:19 fiat saa7115: status: (1E) 0x48, (1F) 0xc0
Jan 20 00:54:19 fiat tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
Jan 20 00:54:19 fiat ivtv: i2c attach [client=(tuner unset),ok]
Jan 20 00:54:19 fiat tveeprom: Hauppauge: model = 48135, rev = J324, serial# = 2761109
Jan 20 00:54:19 fiat tveeprom: tuner = Philips FM1246 (idx = 24, type = 1)
Jan 20 00:54:19 fiat tveeprom: tuner fmt = PAL(I) (eeprom = 0x10, v4l2 = 0x00000010)
Jan 20 00:54:19 fiat tveeprom: audio_processor = CS5331 (type = 9)
Jan 20 00:54:19 fiat ivtv: i2c attach [client=tveeprom[0],ok]
Jan 20 00:54:19 fiat ivtv: Tuner Type 1, Tuner formats 0x00000010, Radio: yes, Model 0x00a93494, Revision 0x00000001
Jan 20 00:54:19 fiat ivtv: PAL tuner detected
Jan 20 00:54:19 fiat ivtv: Radio detected
Jan 20 00:54:19 fiat saa7127: Unknown parameter `enable_output'
Jan 20 00:54:19 fiat saa7127: video encoder driver version V 0.3 loaded
Jan 20 00:54:19 fiat saa7127: Selecting NTSC video Standard
Jan 20 00:54:19 fiat saa7127: Selecting S-Video+Composite
Jan 20 00:54:19 fiat saa7127: Turn WSS off
Jan 20 00:54:19 fiat saa7127: Widescreen Mode 4:3 Full Format
Jan 20 00:54:19 fiat saa7127: Selecting Normal Encoder Input
Jan 20 00:54:19 fiat saa7127: Enable Video Output
Jan 20 00:54:19 fiat ivtv: i2c attach [client=saa7127[0],ok]
Jan 20 00:54:19 fiat ivtv: Encoder revision: 0x02040011
Jan 20 00:54:19 fiat ivtv: Decoder revision: 0x02020023
Jan 20 00:54:19 fiat ivtv: Configuring WinTV PVR 350 card with 9 streams
Jan 20 00:54:19 fiat ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total
Jan 20 00:54:19 fiat ivtv: Registered v4l2 device, streamtype 0 minor 1
Jan 20 00:54:19 fiat ivtv: Create DMA stream 1
Jan 20 00:54:19 fiat ivtv: Registered v4l2 device, streamtype 1 minor 32
Jan 20 00:54:19 fiat ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total
Jan 20 00:54:19 fiat ivtv: Registered v4l2 device, streamtype 2 minor 224
Jan 20 00:54:19 fiat ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total
Jan 20 00:54:19 fiat ivtv: Registered v4l2 device, streamtype 3 minor 24
Jan 20 00:54:19 fiat ivtv: Create stream 4
Jan 20 00:54:19 fiat ivtv: Registered v4l2 device, streamtype 4 minor 64
Jan 20 00:54:19 fiat ivtv: Create DMA stream 5 using 16 65536 byte buffers 1048576 kbytes total
Jan 20 00:54:19 fiat ivtv: Registered v4l2 device, streamtype 5 minor 16
Jan 20 00:54:19 fiat ivtv: Create stream 6 using 1024 2048 byte buffers 262144 kbytes total
Jan 20 00:54:19 fiat ivtv: Registered v4l2 device, streamtype 6 minor 228
Jan 20 00:54:19 fiat ivtv: Create stream 7
Jan 20 00:54:19 fiat ivtv: Registered v4l2 device, streamtype 7 minor 232
Jan 20 00:54:19 fiat ivtv: Create DMA stream 8
Jan 20 00:54:19 fiat ivtv: Registered v4l2 device, streamtype 8 minor 48
Jan 20 00:54:19 fiat ivtv: Setting Tuner 1
Jan 20 00:54:19 fiat tuner: type set to 1 (Philips PAL_I (FI1246 and compatibles)) by ivtv i2c driver #0
Jan 20 00:54:19 fiat ivtv: Setting audio matrix to input 3, output 1
Jan 20 00:54:19 fiat ivtv: Switching standard to PAL.
Jan 20 00:54:19 fiat ivtv: ivtv_enc_thread: pid = 5417, itv = 0xd1188b20
Jan 20 00:54:19 fiat ivtv: ivtv_dec_thread: pid = 5418, itv = 0xd1188b20
Jan 20 00:54:19 fiat spurious 8259A interrupt: IRQ7.
Jan 20 00:54:19 fiat saa7115: decoder set norm PAL
Jan 20 00:54:19 fiat saa7115: set audio: 0x01
Jan 20 00:54:19 fiat saa7127: Setting Encoder Video Standard
Jan 20 00:54:19 fiat saa7127: Set PAL Video Mode
Jan 20 00:54:19 fiat saa7127: Selecting PAL video Standard
Jan 20 00:54:19 fiat ivtv: Initialized WinTV PVR 350, card #0
Jan 20 00:54:19 fiat ivtv: ==================== END INIT IVTV ====================
------------------------------------------------------- This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
