I manually loaded the modules and it worked; now I'm trying to get the damn thing to load at boot and that's causing me some more headaches. 350 is working but can't get the 150 to work when autoloading the modules. If I find a working config, I'll post it. The driver seems to load fine:
ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.2 (c) loading ivtv: Linux version: 2.6.10-gentoo-r6 K8 gcc-3.4 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 350 card ivtv: Found an iTVC15 based chip ACPI: PCI interrupt 0000:02:07.0[A] -> GSI 19 (level, low) -> IRQ 19 ivtv: XXX PCI device: 0x00e1 vendor: 0x10de lirc_i2c: chip found @ 0x18 (Hauppauge IR) ivtv: i2c attach [client=Hauppauge IR,ok] lirc_dev: lirc_register_plugin:sample_rate: 10 saa7127: detecting saa7127 client on address 0x88 saa7127: Selecting NTSC video Standard saa7127: Selecting S-Video+Composite saa7127: Turn WSS off saa7127: Widescreen Mode 4:3 Full Format saa7127: Selecting Normal Encoder Input saa7127: Enable Video Output ivtv: i2c attach [client=saa7127[2],ok] cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005) msp34xx: ivtv version msp34xx: init: chip=MSP3418W-B3, has NICAM support, simple (D) mode, simpler (G) no-thread mode msp34xx: $Id$ compiled on: Jan 25 2005 18:58:46 ivtv: i2c attach [client=MSP3418W-B3,ok] saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) saa7115: detecting saa7115 client on address 0x42 saa7115: writing init values ivtv: i2c attach [client=saa7115[1],ok] saa7115: status: (1E) 0x80, (1F) 0x90 tveeprom: Hauppauge: model = 48139, rev = K257, serial# = 7597218 tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38) tveeprom: tuner fmt = PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio_processor = CS5331 (type = 9) ivtv: i2c attach [client=tveeprom[2],ok] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] wm8775: starting probe for adapter ivtv i2c driver #0 (0x10005) tda9885/6/7: chip found @ 0x86 ivtv: i2c attach [client=tda9887,ok] ivtv: Tuner Type 38, Tuner formats 0x00400e17, Radio: yes, Model 0x00ad2557, Revision 0x00000001 ivtv: Radio detected ivtv: Encoder revision: 0x02040024 ivtv: Encoder Firmware may be buggy, use version 0x02040011 ivtv: Decoder revision: 0x02020023 ivtv: Configuring WinTV PVR 350 card with 10 streams ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total ivtv: Registered v4l2 device, streamtype 0 minor 0 ivtv: Create DMA stream 1 ivtv: Registered v4l2 device, streamtype 1 minor 32 ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 2 minor 224 ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 24 ivtv: Create stream 4 ivtv: Registered v4l2 device, streamtype 4 minor 64 ivtv: Create DMA stream 5 using 16 65536 byte buffers 1048576 kbytes total ivtv: Registered v4l2 device, streamtype 5 minor 16 ivtv: Create stream 6 using 1024 2048 byte buffers 262144 kbytes total ivtv: Registered v4l2 device, streamtype 6 minor 228 ivtv: Create stream 7 ivtv: Registered v4l2 device, streamtype 7 minor 232 ivtv: Create DMA stream 8 using 6 103680 byte buffers 622080 kbytes total ivtv: Registered v4l2 device, streamtype 8 minor 48 ivtv: Create DMA stream 9 using 32 65536 byte buffers 2097152 kbytes total ivtv: Setting Tuner 38 tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv i2c driver #0 saa7115: decoder set input (4) saa7115: now setting Composite input ivtv: Setting audio matrix to input 3, output 1 ivtv: Switching standard to PAL. ivtv: ivtv_enc_thread: pid = 15612, itv = 0xe0c26ba0 ivtv: ivtv_dec_thread: pid = 15613, itv = 0xe0c26ba0 saa7115: decoder set norm PAL saa7115: set audio: 0x01 saa7127: Setting Encoder Video Standard saa7127: Set PAL Video Mode saa7127: Selecting PAL video Standard ivtv: Initialized WinTV PVR 350, card #0 ivtv: Autodetected WinTV PVR 150 card ivtv: Found an iTVC16 based chip ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 17 (level, low) -> IRQ 17 ivtv: XXX PCI device: 0x00e1 vendor: 0x10de saa7127: detecting saa7127 client on address 0x88 saa7127: Selecting NTSC video Standard saa7127: Selecting S-Video+Composite saa7127: Turn WSS off saa7127: Widescreen Mode 4:3 Full Format saa7127: Selecting Normal Encoder Input saa7127: Enable Video Output ivtv: i2c attach [client=saa7127[3],ok] cx25840: starting probe for adapter ivtv i2c driver #1 (0x10005) saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005) tveeprom: Hauppauge: model = 26559, rev = C260, serial# = 7627086 tveeprom: tuner = LG S001D MK3 (idx = 60, type = 4) tveeprom: tuner fmt = PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio_processor = MSP3410D (type = 5) ivtv: i2c attach [client=tveeprom[3],ok] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 ivtv: i2c attach [client=(tuner unset),ok] wm8775: starting probe for adapter ivtv i2c driver #1 (0x10005) wm8775: detecting client on address 0x36 wm8775: Offset reset.reg[0]=2e00 wm8775: Offset reset.reg[1]=0e00 wm8775: Offset reset.reg[2]=1600 wm8775: Offset reset.reg[3]=1800 wm8775: Offset reset.reg[4]=1a00 wm8775: Offset reset.reg[5]=1c00 wm8775: Offset reset.reg[6]=1e00 wm8775: Offset reset.reg[7]=2000 wm8775: Offset reset.reg[8]=2200 wm8775: Offset reset.reg[9]=2400 wm8775: Offset reset.reg[10]=2600 wm8775: Offset reset.reg[11]=2800 wm8775: Offset reset.reg[12]=2a00 wm8775: Updating reg[R23]=2e01 added Reset with default 1 wm8775: Updating reg[R7]=0e00 added TOD with default 0 wm8775: Updating reg[R11]=1600 added ADCHPD with default 0 wm8775: Updating reg[R11]=1600 added ADCMCLK with default 0 wm8775: Updating reg[R11]=1620 added ADCWL with default 2 wm8775: Updating reg[R11]=1620 added ADCBCP with default 0 wm8775: Updating reg[R11]=1620 added ADCLRP with default 0 wm8775: Updating reg[R11]=1622 added ADCFMT with default 2 wm8775: Updating reg[R12]=1800 added ADCMS with default 0 wm8775: Updating reg[R12]=1800 added ADCOSR with default 0 wm8775: Updating reg[R12]=1802 added ADCRATE with default 2 wm8775: Updating reg[R13]=1a00 added AINPD with default 0 wm8775: Updating reg[R13]=1a00 added ADCPD with default 0 wm8775: Updating reg[R13]=1a00 added PWDN with default 0 wm8775: Updating reg[R14]=1c00 added ZCLA with default 0 wm8775: Updating reg[R14]=1ccf added LAG with default 207 wm8775: Updating reg[R15]=1e00 added ZCRA with default 0 wm8775: Updating reg[R15]=1ecf added RAG with default 207 wm8775: Updating reg[R16]=2000 added LCSEL with default 0 wm8775: Updating reg[R16]=2070 added MAXGAIN with default 7 wm8775: Updating reg[R16]=207b added LCT with default 11 wm8775: Updating reg[R17]=2200 added LCEN with default 0 wm8775: Updating reg[R17]=2200 added ALCZC with default 0 wm8775: Updating reg[R17]=2200 added HLD with default 0 wm8775: Updating reg[R18]=2430 added DCY with default 3 wm8775: Updating reg[R18]=2432 added ATK with default 2 wm8775: Updating reg[R19]=2600 added NGTH with default 0 wm8775: Updating reg[R19]=2600 added NGAT with default 0 wm8775: Updating reg[R20]=2820 added TRANWIN with default 2 wm8775: Updating reg[R20]=2826 added MAXATTEN with default 6 wm8775: Updating reg[R21]=2a00 added LRBOTH with default 0 wm8775: Updating reg[R21]=2a00 added MUTELA with default 0 wm8775: Updating reg[R21]=2a00 added MUTERA with default 0 wm8775: Updating reg[R21]=2a01 added AMX with default 1 wm8775: Final reset.reg[0]=2e01 wm8775: Final reset.reg[1]=0e00 wm8775: Final reset.reg[2]=1622 wm8775: Final reset.reg[3]=1802 wm8775: Final reset.reg[4]=1a00 wm8775: Final reset.reg[5]=1ccf wm8775: Final reset.reg[6]=1ecf wm8775: Final reset.reg[7]=207b wm8775: Final reset.reg[8]=2200 wm8775: Final reset.reg[9]=2432 wm8775: Final reset.reg[10]=2600 wm8775: Final reset.reg[11]=2826 wm8775: Final reset.reg[12]=2a01 wm8775: Offset reset.reg[0]=2e00 wm8775: Offset reset.reg[1]=0e00 wm8775: Offset reset.reg[2]=1600 wm8775: Offset reset.reg[3]=1800 wm8775: Offset reset.reg[4]=1a00 wm8775: Offset reset.reg[5]=1c00 wm8775: Offset reset.reg[6]=1e00 wm8775: Offset reset.reg[7]=2000 wm8775: Offset reset.reg[8]=2200 wm8775: Offset reset.reg[9]=2400 wm8775: Offset reset.reg[10]=2600 wm8775: Offset reset.reg[11]=2800 wm8775: Offset reset.reg[12]=2a00 wm8775: Updating reg[R23]=2e01 added Reset with default 1 wm8775: Updating reg[R7]=0e00 added TOD with default 0 wm8775: Updating reg[R11]=1600 added ADCHPD with default 0 wm8775: Updating reg[R11]=1600 added ADCMCLK with default 0 wm8775: Updating reg[R11]=1620 added ADCWL with default 2 wm8775: Updating reg[R11]=1620 added ADCBCP with default 0 wm8775: Updating reg[R11]=1620 added ADCLRP with default 0 wm8775: Updating reg[R11]=1622 added ADCFMT with default 2 wm8775: Updating reg[R12]=1800 added ADCMS with default 0 wm8775: Updating reg[R12]=1800 added ADCOSR with default 0 wm8775: Updating reg[R12]=1802 added ADCRATE with default 2 wm8775: Updating reg[R13]=1a00 added AINPD with default 0 wm8775: Updating reg[R13]=1a00 added ADCPD with default 0 wm8775: Updating reg[R13]=1a00 added PWDN with default 0 wm8775: Updating reg[R14]=1c00 added ZCLA with default 0 wm8775: Updating reg[R14]=1ccf added LAG with default 207 wm8775: Updating reg[R15]=1e00 added ZCRA with default 0 wm8775: Updating reg[R15]=1ecf added RAG with default 207 wm8775: Updating reg[R16]=2000 added LCSEL with default 0 wm8775: Updating reg[R16]=2070 added MAXGAIN with default 7 wm8775: Updating reg[R16]=207b added LCT with default 11 wm8775: Updating reg[R17]=2200 added LCEN with default 0 wm8775: Updating reg[R17]=2200 added ALCZC with default 0 wm8775: Updating reg[R17]=2200 added HLD with default 0 wm8775: Updating reg[R18]=2430 added DCY with default 3 wm8775: Updating reg[R18]=2432 added ATK with default 2 wm8775: Updating reg[R19]=2600 added NGTH with default 0 wm8775: Updating reg[R19]=2600 added NGAT with default 0 wm8775: Updating reg[R20]=2820 added TRANWIN with default 2 wm8775: Updating reg[R20]=2826 added MAXATTEN with default 6 wm8775: Updating reg[R21]=2a00 added LRBOTH with default 0 wm8775: Updating reg[R21]=2a00 added MUTELA with default 0 wm8775: Updating reg[R21]=2a00 added MUTERA with default 0 wm8775: Updating reg[R21]=2a01 added AMX with default 1 wm8775: Final reset.reg[0]=2e01 wm8775: Final reset.reg[1]=0e00 wm8775: Final reset.reg[2]=1622 wm8775: Final reset.reg[3]=1802 wm8775: Final reset.reg[4]=1a00 wm8775: Final reset.reg[5]=1ccf wm8775: Final reset.reg[6]=1ecf wm8775: Final reset.reg[7]=207b wm8775: Final reset.reg[8]=2200 wm8775: Final reset.reg[9]=2432 wm8775: Final reset.reg[10]=2600 wm8775: Final reset.reg[11]=2826 wm8775: Final reset.reg[12]=2a01 wm8775: Setting register ADCFMT (7) to 1, R11.0..1, old value 02 wm8775: Setting register ADCMS (8) to 1, R12.8..8, old value 00 wm8775: Setting register DCY (24) to 8, R18.4..7, old value 03 wm8775: Setting register NGAT (27) to 1, R19.0..0, old value 00 wm8775: Setting register LRBOTH (30) to 1, R21.8..8, old value 00 wm8775: Setting register AMX (33) to 15, R21.0..3, old value 01 wm8775: Updating register 0 (R23), config: 2e01 active: 2e00. wm8775: Skipping register 1 (R7), config: 0e00 active: 0e00. wm8775: Updating register 2 (R11), config: 1622 active: 1621. wm8775: Updating register 3 (R12), config: 1802 active: 1902. wm8775: Skipping register 4 (R13), config: 1a00 active: 1a00. wm8775: Skipping register 5 (R14), config: 1ccf active: 1ccf. wm8775: Skipping register 6 (R15), config: 1ecf active: 1ecf. wm8775: Skipping register 7 (R16), config: 207b active: 207b. wm8775: Skipping register 8 (R17), config: 2200 active: 2200. wm8775: Updating register 9 (R18), config: 2432 active: 2482. wm8775: Updating register 10 (R19), config: 2600 active: 2601. wm8775: Skipping register 11 (R20), config: 2826 active: 2826. wm8775: Updating register 12 (R21), config: 2a01 active: 2b0f. ivtv: i2c attach [client=wm8775[1],ok] tda9885/6/7: chip found @ 0x86 ivtv: i2c attach [client=tda9887,ok] ivtv: Encoder revision: 0x02040024 ivtv: Encoder Firmware may be buggy, use version 0x02040011 ivtv: Configuring WinTV PVR 150 card with 4 streams ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total ivtv: Registered v4l2 device, streamtype 0 minor 1 ivtv: Create DMA stream 1 ivtv: Registered v4l2 device, streamtype 1 minor 33 ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 2 minor 225 ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 25 ivtv: Setting Tuner 51 tuner: type set to 51 (LG PAL (TAPE series, pvr150)) by ivtv i2c driver #1 ivtv: Switching standard to PAL. ivtv: Initialized WinTV PVR 150, card #1 ivtv: ==================== END INIT IVTV ==================== ivtv: ivtv_enc_thread: pid = 15726, itv = 0xe0c3ae64 The different devices are there but trying dd if=/dev/v4l/video1 of=vid.mpg... does nothing. As if something is locking the device. Anyway, the TV-out is working again so I guess that was another problem. N. On Tue, 25 Jan 2005 20:29:49 +0100, Peter Martens <[EMAIL PROTECTED]> wrote: > Can you post your modprobe.conf please? Are you tuning through mythtv > or with ptune? > Thanks ------------------------------------------------------- This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
