Hello,
I'm having various problems getting a PVR-350 on FC3 following Jarods
Guide and getting TV out. TV out works now but it doesn't have any
mplayer -vo xv capabailities.
I changed my yum.conf to use testing and yum update installs the
ivtv-0.3.2c-66.rhfc3.at version of the driver. Is that version still
bleeding?
What is the command to install the 0.2.x specific drivers in yum, and
can anyone tell me why I am getting errors with the tveeprom section?
Here is my modules.conf and output from:
Modprobe tveeprom ; modprobe ivtv ; modprobe ivtv_fb
Thanks!
Jan 28 13:41:49 mythbox kernel: ivtv: ==================== START INIT
IVTV ====================
Jan 28 13:41:49 mythbox kernel: ivtv: version 0.3.2 (c) loading
Jan 28 13:41:49 mythbox kernel: ivtv: Linux version: 2.6.10-1.737_FC3
686 REGPARM 4KSTACKS gcc-3.4
Jan 28 13:41:49 mythbox kernel: ivtv: In case of problems please include
the debug info
Jan 28 13:41:49 mythbox kernel: ivtv: between the START INIT IVTV and
END INIT IVTV lines when
Jan 28 13:41:49 mythbox kernel: ivtv: mailing the ivtv-devel
mailinglist.
Jan 28 13:41:49 mythbox kernel: ivtv: Autodetected WinTV PVR 350 card
Jan 28 13:41:49 mythbox kernel: ivtv: Found an iTVC15 based chip
Jan 28 13:41:49 mythbox kernel: ACPI: PCI interrupt 0000:00:0d.0[A] ->
GSI 12 (level, low) -> IRQ 12
Jan 28 13:41:49 mythbox kernel: ivtv: VIA PCI device: 0x0305 vendor:
0x1106
Jan 28 13:41:49 mythbox kernel: saa7115: starting probe for adapter ivtv
i2c driver #0 (0x10005)
Jan 28 13:41:49 mythbox kernel: saa7115: detecting saa7115 client on
address 0x42
Jan 28 13:41:49 mythbox kernel: saa7115: writing init values
Jan 28 13:41:49 mythbox kernel: ivtv: i2c attach [client=saa7115[3],ok]
Jan 28 13:41:49 mythbox kernel: saa7115: status: (1E) 0x48, (1F) 0xc0
Jan 28 13:41:49 mythbox kernel: saa7127: detecting saa7127 client on
address 0x88
Jan 28 13:41:49 mythbox kernel: saa7127: Selecting NTSC video Standard
Jan 28 13:41:49 mythbox kernel: saa7127: Selecting S-Video+Composite
Jan 28 13:41:49 mythbox kernel: saa7127: Turn WSS off
Jan 28 13:41:49 mythbox kernel: saa7127: Widescreen Mode 4:3 Full Format
Jan 28 13:41:49 mythbox kernel: saa7127: Selecting Normal Encoder Input
Jan 28 13:41:49 mythbox kernel: saa7127: Enable Video Output
Jan 28 13:41:49 mythbox kernel: ivtv: i2c attach [client=saa7127[3],ok]
Jan 28 13:41:49 mythbox kernel: tuner: chip found at addr 0xc2 i2c-bus
ivtv i2c driver #0
Jan 28 13:41:49 mythbox kernel: ivtv: i2c attach [client=(tuner
unset),ok]
Jan 28 13:41:49 mythbox kernel: msp34xx: init: chip=MSP3448W-A2 +nicam
+simple +simpler +radio mode=simple
Jan 28 13:41:49 mythbox kernel: ivtv: i2c attach [client=MSP3448W-A2,ok]
Jan 28 13:41:49 mythbox kernel: msp3410: daemon started
Jan 28 13:41:49 mythbox kernel: ivtv: i2c client addr: 0x50 not found!
Jan 28 13:41:49 mythbox kernel: ivtv: Error -19 reading Hauppauge
eeprom.
Jan 28 13:41:49 mythbox kernel: ivtv: Possible causes: the tveeprom
module was not loaded, or
Jan 28 13:41:49 mythbox kernel: ivtv: the eeprom kernel module was
loaded before the tveeprom module.
Jan 28 13:41:50 mythbox kernel: ivtv: Encoder revision: 0x02040024
Jan 28 13:41:50 mythbox kernel: ivtv: Encoder Firmware may be buggy, use
version 0x02040011
Jan 28 13:41:50 mythbox kernel: ivtv: Decoder revision: 0x02020023
Jan 28 13:41:50 mythbox kernel: ivtv: Configuring WinTV PVR 350 card
with 10 streams
Jan 28 13:41:50 mythbox kernel: ivtv: Create DMA stream 0 using 256
16384 byte buffers 4194304 kbytes total
Jan 28 13:41:50 mythbox kernel: ivtv: Registered v4l2 device, streamtype
0 minor 0
Jan 28 13:41:50 mythbox kernel: ivtv: Create DMA stream 1
Jan 28 13:41:50 mythbox kernel: ivtv: Registered v4l2 device, streamtype
1 minor 32
Jan 28 13:41:50 mythbox kernel: ivtv: Create stream 2 using 40 52224
byte buffers 2097152 kbytes total
Jan 28 13:41:50 mythbox kernel: ivtv: Registered v4l2 device, streamtype
2 minor 224
Jan 28 13:41:50 mythbox kernel: ivtv: Create DMA stream 3 using 455 4608
byte buffers 2097152 kbytes total
Jan 28 13:41:50 mythbox kernel: ivtv: Registered v4l2 device, streamtype
3 minor 24
Jan 28 13:41:50 mythbox kernel: ivtv: Create stream 4
Jan 28 13:41:50 mythbox kernel: ivtv: Registered v4l2 device, streamtype
4 minor 64
Jan 28 13:41:50 mythbox kernel: ivtv: Create DMA stream 5 using 16 65536
byte buffers 1048576 kbytes total
Jan 28 13:41:50 mythbox kernel: ivtv: Registered v4l2 device, streamtype
5 minor 16
Jan 28 13:41:50 mythbox kernel: ivtv: Create stream 6 using 1024 2048
byte buffers 262144 kbytes total
Jan 28 13:41:50 mythbox kernel: ivtv: Registered v4l2 device, streamtype
6 minor 228
Jan 28 13:41:50 mythbox kernel: ivtv: Create stream 7
Jan 28 13:41:51 mythbox kernel: ivtv: Registered v4l2 device, streamtype
7 minor 232
Jan 28 13:41:51 mythbox kernel: ivtv: Create DMA stream 8 using 6 103680
byte buffers 622080 kbytes total
Jan 28 13:41:51 mythbox kernel: ivtv: Registered v4l2 device, streamtype
8 minor 48
Jan 28 13:41:51 mythbox kernel: ivtv: Create DMA stream 9 using 32 65536
byte buffers 2097152 kbytes total
Jan 28 13:41:51 mythbox kernel: ivtv: Could not detect tuner standard,
defaulting to NTSC.
Jan 28 13:41:51 mythbox kernel: saa7115: decoder set input (4)
Jan 28 13:41:51 mythbox kernel: saa7115: now setting Composite input
Jan 28 13:41:51 mythbox kernel: ivtv: Setting audio matrix to input 3,
output 1
Jan 28 13:41:51 mythbox kernel: ivtv: Switching standard to NTSC.
Jan 28 13:41:51 mythbox kernel: tuner: tuner type not set
Jan 28 13:41:51 mythbox kernel: saa7115: decoder set norm NTSC
Jan 28 13:41:51 mythbox kernel: ivtv: ivtv_enc_thread: pid = 13678, itv
= 0xd0fb5a20
Jan 28 13:41:51 mythbox kernel: ivtv: ivtv_dec_thread: pid = 13679, itv
= 0xd0fb5a20
Jan 28 13:41:51 mythbox kernel: saa7115: set audio: 0x01
Jan 28 13:41:51 mythbox kernel: saa7127: Setting Encoder Video Standard
Jan 28 13:41:51 mythbox kernel: saa7127: Set NTSC Video Mode
Jan 28 13:41:51 mythbox kernel: saa7127: Selecting NTSC video Standard
Jan 28 13:41:51 mythbox kernel: ivtv: Initialized WinTV PVR 350, card #0
Jan 28 13:41:51 mythbox kernel: ivtv: ==================== END INIT
IVTV ====================
Jan 28 13:41:51 mythbox kernel: ivtv-osd: Framebuffer module loaded
(attached to ivtv card id 0)
Jan 28 13:41:51 mythbox kernel: ivtv-osd: Framebuffer is at
decoder-relative address 0x00510000 and has 1704960 bytes.
Jan 28 13:41:51 mythbox kernel: ivtv-osd: screen coords: [0 0] -> [720
480]
Jan 28 13:41:51 mythbox kernel: ivtv-osd: original global alpha = 208
Jan 28 13:41:51 mythbox kernel: ivtv-osd: current OSD state = 39
Jan 28 13:41:51 mythbox kernel: ivtv-osd: new global alpha = 208 (1 255
0)
Jan 28 13:41:51 mythbox kernel: ivtv-osd: framebuffer at 0xe9510000,
mapped to 0xd1e10000, size 1350k
Jan 28 13:41:51 mythbox kernel: ivtv-osd: mode is 720x480x32,
linelength=2880
Jan 28 13:41:51 mythbox kernel: ivtv-osd: fb1: iTVC15 TV out frame
buffer device
# ivtv modules setup
alias char-major-81 videodev
alias char-major-81-0 ivtv
install ivtv /sbin/modprobe --ignore-install ivtv; /sbin/modprobe
ivtv-fb
options ivtv tuner=-1
alias eth0 via-rhine
alias snd-card-0 snd-ens1371
options snd-card-0 index=0
install snd-ens1371 /sbin/modprobe --ignore-install snd-ens1371 &&
/usr/sbin/alsactl restore >/dev/null 2>&1 || :
remove snd-ens1371 { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; };
/sbin/modprobe -r --ignore-remove snd-ens1371
alias usb-controller uhci-hcd
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF verion 1.0.8 ---
alias snd-card-0 snd-ens1371
alias sound-slot-0 snd-ens1371
# --- END: Generated by ALSACONF, do not edit. ---
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
