I am having some problems on x to show on tv out rca jack for PVR-350 and
FC2. Basically I get a blank tv screen. Monitor also goes blank.
x log errors:
(EE) IVTVDEV(0): FBIOBLANK: Invalid argument
(EE) IVTVDEV(0): FBIOPAN_DISPLAY: Invalid argument
(==) IVTVDEV(0): Backing store disabled
(EE) IVTVDEV(0): FBIOBLANK: Invalid argument
IVTV:
Feb 15 19:45:32 amd800 kernel: ivtv: ==================== START INIT IVTV
====================
Feb 15 19:45:32 amd800 kernel: ivtv: version 0.2.0 (rc3e) loading
Feb 15 19:45:32 amd800 kernel: ivtv: Linux version: 2.6.10-1.12_FC2 686
REGPARM 4KSTACKS gcc-3.3
Feb 15 19:45:32 amd800 kernel: ivtv: In case of problems please include the
debug info
Feb 15 19:45:32 amd800 kernel: ivtv: between the START INIT IVTV and END
INIT IVTV lines when
Feb 15 19:45:32 amd800 kernel: ivtv: mailing the ivtv-devel mailinglist.
Feb 15 19:45:32 amd800 kernel: ivtv: Autodetected WinTV PVR 350 card
Feb 15 19:45:32 amd800 kernel: ivtv: Found an iTVC15 based chip
Feb 15 19:45:32 amd800 kernel: ivtv: Unreasonably low latency timer, setting
to 64 (was 32)
Feb 15 19:45:33 amd800 kernel: ivtv: VIA PCI device: 0x0305 vendor: 0x1106
Feb 15 19:45:33 amd800 kernel: ivtv: i2c attach [client=tveeprom[0],ok]
Feb 15 19:45:33 amd800 kernel: ivtv: Tuner Type 47, Tuner formats
0x00001000, Radio: yes, Model 0x00ad2598, Revision 0x00000001
Feb 15 19:45:33 amd800 kernel: ivtv: NTSC tuner detected
Feb 15 19:45:33 amd800 kernel: ivtv: Radio detected
Feb 15 19:45:33 amd800 kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv
i2c driver #0
Feb 15 19:45:33 amd800 kernel: ivtv: i2c attach [client=(tuner unset),ok]
Feb 15 19:45:33 amd800 kernel: saa7115: starting probe for adapter ivtv i2c
driver #0 (0x10005)
Feb 15 19:45:33 amd800 kernel: ivtv: i2c attach [client=saa7115[0],ok]
Feb 15 19:45:33 amd800 kernel: ivtv: i2c attach [client=saa7127[0],ok]
Feb 15 19:45:33 amd800 kernel: ivtv: Failed to load module msp3400
Feb 15 19:45:34 amd800 kernel: ivtv: Encoder revision: 0x02040024
Feb 15 19:45:34 amd800 kernel: ivtv: Encoder Firmware is buggy, use version
0x02040011
Feb 15 19:45:34 amd800 kernel: ivtv: Decoder revision: 0x02020023
Feb 15 19:45:34 amd800 kernel: ivtv: Configuring WinTV PVR 350 card with 9
streams
Feb 15 19:45:34 amd800 kernel: ivtv: Create DMA stream 0 using 256 16384
byte buffers 4194304 kbytes total
Feb 15 19:45:34 amd800 kernel: ivtv: Registered v4l2 device, streamtype 0
minor 0
Feb 15 19:45:34 amd800 kernel: ivtv: Create DMA stream 1
Feb 15 19:45:34 amd800 kernel: ivtv: Registered v4l2 device, streamtype 1
minor 32
Feb 15 19:45:34 amd800 kernel: ivtv: Create stream 2 using 40 52224 byte
buffers 2097152 kbytes total
Feb 15 19:45:34 amd800 kernel: ivtv: Registered v4l2 device, streamtype 2
minor 224
Feb 15 19:45:34 amd800 kernel: ivtv: Create DMA stream 3 using 455 4608 byte
buffers 2097152 kbytes total
Feb 15 19:45:34 amd800 kernel: ivtv: Registered v4l2 device, streamtype 3
minor 24
Feb 15 19:45:34 amd800 kernel: ivtv: Create stream 4
Feb 15 19:45:34 amd800 kernel: ivtv: Registered v4l2 device, streamtype 4
minor 64
Feb 15 19:45:34 amd800 kernel: ivtv: Create DMA stream 5 using 16 65536 byte
buffers 1048576 kbytes total
Feb 15 19:45:34 amd800 kernel: ivtv: Registered v4l2 device, streamtype 5
minor 16
Feb 15 19:45:34 amd800 kernel: ivtv: Create stream 6 using 1024 2048 byte
buffers 262144 kbytes total
Feb 15 19:45:34 amd800 kernel: ivtv: Registered v4l2 device, streamtype 6
minor 228
Feb 15 19:45:34 amd800 kernel: ivtv: Create stream 7
Feb 15 19:45:34 amd800 kernel: ivtv: Registered v4l2 device, streamtype 7
minor 232
Feb 15 19:45:34 amd800 kernel: ivtv: Create DMA stream 8
Feb 15 19:45:34 amd800 kernel: ivtv: Registered v4l2 device, streamtype 8
minor 48
Feb 15 19:45:34 amd800 kernel: ivtv: Setting Tuner 47
Feb 15 19:45:34 amd800 kernel: tuner: type set to 47 (LG NTSC (TAPE series))
by ivtv i2c driver #0
Feb 15 19:45:34 amd800 kernel: ivtv: Setting audio matrix to input 3, output
1
Feb 15 19:45:34 amd800 kernel: ivtv: i2c client addr: 0x40 not found!
Feb 15 19:45:34 amd800 kernel: ivtv: Switching standard to NTSC.
Feb 15 19:45:34 amd800 kernel: ivtv: i2c client addr: 0x40 not found!
Feb 15 19:45:34 amd800 kernel: ivtv: ivtv_enc_thread: pid = 2731, itv =
0xd501a420
Feb 15 19:45:34 amd800 kernel: ivtv: ivtv_dec_thread: pid = 2732, itv =
0xd501a420
Feb 15 19:45:34 amd800 kernel: ivtv: Initialized WinTV PVR 350, card #0
Feb 15 19:45:34 amd800 kernel: ivtv: ==================== END INIT IVTV
====================
Feb 15 19:45:34 amd800 kernel: ivtv-osd: Framebuffer module loaded (attached
to ivtv card id 0)
Feb 15 19:45:34 amd800 kernel: ivtv-osd: Framebuffer is at decoder-relative
address 0x00510000 and has 1704960 bytes.
Feb 15 19:45:34 amd800 kernel: ivtv-osd: screen coords: [0 0] -> [720 480]
Feb 15 19:45:34 amd800 kernel: ivtv-osd: original global alpha = 208
Feb 15 19:45:34 amd800 kernel: ivtv-osd: current OSD state = 39
Feb 15 19:45:34 amd800 kernel: ivtv-osd: new global alpha = 208 (1 255 0)
Feb 15 19:45:34 amd800 kernel: ivtv-osd: framebuffer at 0xd9510000, mapped
to 0xd5e90000, size 1350k
Feb 15 19:45:34 amd800 kernel: ivtv-osd: mode is 720x480x32, linelength=2880
Feb 15 19:45:34 amd800 kernel: ivtv-osd: fb1: iTVC15 TV out frame buffer
device
Feb 15 19:45:34 amd800 kernel: ivtv: i2c client addr: 0x40 not found!
Feb 15 19:45:34 amd800 kernel: ivtv: i2c client addr: 0x40 not found!
xorg.conf
# XFree86 4 configuration created by pyxf86config
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# RgbPath is the location of the RGB database. Note, this is the name of
the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules/extensions/nvidia"
ModulePath "/usr/X11R6/lib/modules/extensions"
ModulePath "/usr/X11R6/lib/modules"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
# Load "fbdevhw"
# Load "glx"
Load "record"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "InputDevice"
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier "DevInputMice"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "Monitor"
Identifier "NTSC Monitor"
HorizSync 30-68
VertRefresh 50-120
Mode "720x480"
# D: 34.563 MHz, H: 37.244 kHz, V: 73.897 Hz
DotClock 34.564
HTimings 720 752 840 928
VTimings 480 484 488 504
Flags "-HSync" "-VSync"
EndMode
EndSection
Section "Device"
Identifier "Hauppauge PVR 350 iTVC15 Framebuffer"
Driver "ivtvdev"
#Driver "fbdev"
### change fb0 to whatever your card grabbed
Option "fbdev" "/dev/fb1"
### change the BusID to whatever is reported by lspci, specify it as
hex.
BusID "0:09:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Hauppauge PVR 350 iTVC15 Framebuffer"
Monitor "NTSC Monitor"
DefaultDepth 24
DefaultFbbpp 32
Subsection "Display"
Depth 24
FbBpp 32
Modes "640x480"
EndSubsection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
modprobe.conf
alias char-major-81-0 ivtv
alias tveeprom tveeprom-ivtv
install ivtv /sbin/modprobe --ignore-install ivtv; /sbin/modprobe ivtv-fb
alias char-major-61 lirc_i2c
rc.local
/usr/bin/ivtvctl --set-ctrl=mute=0
/usr/bin/ivtvctl -f width=640,height=480
/usr/bin/ivtvfbctl /dev/fb1 -alpha -on -globalalpha -nolocalalpha
#/sbin/service mythbackend start
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.8.8 - Release Date: 2/14/2005
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
