Hi,
I'm not sure who needs to know this, but here it is, in case somebody can
fix it.
PVR-350 has an SAA7129, which is almost, but not quite, the same as
SAA7127. One difference is the output selection register.
The saa7127 module detects and initialises the 7129 chip correctly, putting
0x38 in this register, which turns CVBS and Y/C on. But if you ever try to
change the output later, it uses 7127 values instead, and you get the wrong
effect.
Here is a list of working values for that register (0x2d):
CVBS only 0x20
Y/C only 0x18
CVBS and Y/C 0x38
I can't test if the RGB/YUV settings are wrong too, since PVR-350 doesn't
seem to have RGB led out anywhere.
The module probably requires a few more changes than that, since the
detection of 7129 doesn't seem to be stored anywhere, so it only affects
the initialisation.
Hope this somehow reaches the right person.
Regards,
Thomas
--
9876543210 Magic tab-o-meter. http://www.armware.dk/
^
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
