On Wed, 23 Feb 2005 13:19:49 -0800 Jarod Wilson <[EMAIL PROTECTED]> wrote:
> Here's a cumulative patch against ivtv 0.3.2e, containing Jelle's vsync > patch, > Jaap's picture controls patch, Tyler's pg600/150mce patch and a tuner patch > that *hopefully* works with the PVR-500MCE NTSC's tuner. > > Almost completely untested, since my 150 and 500 are being stupid right now... > It's close. On my PVR-150-NTSC, with no audiofmt parameter set, I get no tuner audio, but as always, switching to the composite input gives me line input audio mixed with tuner audio. With audiofmt=1, I get white noise on the tuner input but still get line input audio mixed with tuner audio on the composite input. I've been here before and changing the AUD_STANDARD and AUD_MODE_AUD_SYSTEM registers will affect this. I'm going to play with it. It does something strange if I switch it from tuner to composite and back...sounds like it sets the audio mode twice. With no RF signal applied, I can hear the de-emphasis curve change in the white noise as it goes back to the tuner input from the composite input. There's still something wierd going on with the audio routing...by all indications we should be able to seperate the line input and tuner on the composite input and it's not working like it should. There's something wrong in the register defs IMO, but I don't have enough information to figure out exactly what it is. ----- Jim Reese, WD5IYT [EMAIL PROTECTED] ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
