Nope, this is the problem I have been talking about. If the card is not tuned to a channel, the patch does not work.
-J On Wed, 2005-03-02 at 21:52, Jaap Braam wrote: > I SPOKE TOO SOON.... > > I had audio after a reboot of my box... > > After a power down, unplug, plug and boot again the sound was gone... > > This is better than before, because I usually had no sound at all > after a reboot... > > Apparently some necessary settings from the 0.3.2d driver survive a > reboot... I'll look into settings that are set in 0.3.2d but are > untouched in the patched 0.3.2f driver... > > Jaap > > > > Jaap Braam wrote: > > Tyler, > > > > This patch WORKS!!!! I've got audio using the 0.3.2f driver. Only > > this patch applied... > > > > Thanx! > > > > Jaap > > > > > > Tyler Trafford wrote: > > > On Wed, 02 Mar 2005 00:01:40 +0100, Jaap Braam <[EMAIL PROTECTED]> wrote: > > > > > > > 0.3.2f doesn't work for me (PVR150MCE PAL), no sound ... Neither did > > > > 0.3.2e... I'm still using a full functional 0.3.2d driver (no patch > > > > needed) .... > > > > > > > > I'll try to locate the significant differences..... > > > > > > > I just posted this under another thread, but this is a better place. > > > Could you try this tiny patch Jaap? > > > ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
