hi all,
I have a PVR 150 card (model 1052 - PAL/SECAM) running
in a fedora core 2 (2.6.10 4kstacks kernel) box.
I tried ivtv modules, from 0.3.2b to the latest 0.3.2h
with all the same issue : cat /dev/video0 >
capture.mpg produce a 0k file.
I have tested either kernel without 4kstack and with
4kstacks. no difference.
all modules load correctly. I always verify I load the
correct module, as the first versions were placed in
the extra folder, and now in a dedicated ivtv folder.
I use the ivtv tuner module. My tuner is the Philips
FQ1216ME MK3, I tried
several tuner number : 38, 50, 51, 52, 56.
I also tried all possible inputs : tuner and s-video
with a PAL camera.
I put ivtv's debug level 255, since the 0.3.2h I see
this error I have never seen before :
ivtv: Error -19 reading Hauppauge eeprom.
ivtv: Possible causes: the tveeprom module was not
loaded, or
ivtv: the eeprom kernel module was loaded before the
tveeprom module.
I'm really confused, I don't konw what to test now !
thanks for your help
-- fred
ivtv: ==================== START INIT IVTV
====================
ivtv: version 0.3.2 (h) loading
ivtv: Linux version: 2.6.10-1.12_FC2 686 REGPARM
4KSTACKS gcc-3.3
ivtv: In case of problems please include the debug
info
ivtv: between the START INIT IVTV and END INIT IVTV
lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: ... running on kernel 2.6.10-1.12_FC2
ivtv: Setting some variables to invalid for detection
ivtv: Scanning PCI bus..
ivtv: Found card #0
ivtv: Autodetected WinTV PVR 150 card
ivtv: Found an iTVC16 based chip
ivtv: base addr: 0xe8000000
ivtv: Enabling pci device
ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 11 (level,
low) -> IRQ 11
ivtv: Bus Mastering Enabled.<6>ivtv: Unreasonably low
latency timer, setting to 64 (was 32)
ivtv: 22 (rev 1) at 00:08.0, ivtv: irq: 11,
latency: 64, memory: 0xe8000000
ivtv: VIA PCI device: 0x3205 vendor: 0x1106
ivtv: attempting ioremap at 0xe8000000 len 0x00800000
ivtv: attempting ioremap at 0xe9000000 len 0x00800000
ivtv: attempting ioremap at 0xea000000 len 0x00010000
ivtv: activating i2c...
ivtv: i2c init
ivtv: setting scl and sda to 1
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver
#0
ivtv: i2c client attach
ivtv: i2c attach [client=(tuner unset),ok]
saa7127: detecting saa7127 client on address 0x88
saa7127: Selecting NTSC video Standard
saa7127: Selecting S-Video+Composite
saa7127: Turn WSS off
saa7127: Widescreen Mode 4:3 Full Format
saa7127: Selecting Normal Encoder Input
saa7127: Enable Video Output
ivtv: i2c client attach
ivtv: i2c attach [client=saa7127[0],ok]
cx25840: starting probe for adapter ivtv i2c driver #0
(0x10005)
wm8775: starting probe for adapter ivtv i2c driver #0
(0x10005)
wm8775: detecting client on address 0x36
wm8775: Offset reset.reg[0]=2e00
wm8775: Offset reset.reg[1]=0e00
wm8775: Offset reset.reg[2]=1600
wm8775: Offset reset.reg[3]=1800
wm8775: Offset reset.reg[4]=1a00
wm8775: Offset reset.reg[5]=1c00
wm8775: Offset reset.reg[6]=1e00
wm8775: Offset reset.reg[7]=2000
wm8775: Offset reset.reg[8]=2200
wm8775: Offset reset.reg[9]=2400
wm8775: Offset reset.reg[10]=2600
wm8775: Offset reset.reg[11]=2800
wm8775: Offset reset.reg[12]=2a00
wm8775: Updating reg[R23]=2e01 added Reset with
default 1
wm8775: Updating reg[R7]=0e00 added TOD with default 0
wm8775: Updating reg[R11]=1600 added ADCHPD with
default 0
wm8775: Updating reg[R11]=1600 added ADCMCLK with
default 0
wm8775: Updating reg[R11]=1620 added ADCWL with
default 2
wm8775: Updating reg[R11]=1620 added ADCBCP with
default 0
wm8775: Updating reg[R11]=1620 added ADCLRP with
default 0
wm8775: Updating reg[R11]=1622 added ADCFMT with
default 2
wm8775: Updating reg[R12]=1800 added ADCMS with
default 0
wm8775: Updating reg[R12]=1800 added ADCOSR with
default 0
wm8775: Updating reg[R12]=1802 added ADCRATE with
default 2
wm8775: Updating reg[R13]=1a00 added AINPD with
default 0
wm8775: Updating reg[R13]=1a00 added ADCPD with
default 0
wm8775: Updating reg[R13]=1a00 added PWDN with default
0
wm8775: Updating reg[R14]=1c00 added ZCLA with default
0
wm8775: Updating reg[R14]=1ccf added LAG with default
207
wm8775: Updating reg[R15]=1e00 added ZCRA with default
0
wm8775: Updating reg[R15]=1ecf added RAG with default
207
wm8775: Updating reg[R16]=2000 added LCSEL with
default 0
wm8775: Updating reg[R16]=2070 added MAXGAIN with
default 7
wm8775: Updating reg[R16]=207b added LCT with default
11
wm8775: Updating reg[R17]=2200 added LCEN with default
0
wm8775: Updating reg[R17]=2200 added ALCZC with
default 0
wm8775: Updating reg[R17]=2200 added HLD with default
0
wm8775: Updating reg[R18]=2430 added DCY with default
3
wm8775: Updating reg[R18]=2432 added ATK with default
2
wm8775: Updating reg[R19]=2600 added NGTH with default
0
wm8775: Updating reg[R19]=2600 added NGAT with default
0
wm8775: Updating reg[R20]=2820 added TRANWIN with
default 2
wm8775: Updating reg[R20]=2826 added MAXATTEN with
default 6
wm8775: Updating reg[R21]=2a00 added LRBOTH with
default 0
wm8775: Updating reg[R21]=2a00 added MUTELA with
default 0
wm8775: Updating reg[R21]=2a00 added MUTERA with
default 0
wm8775: Updating reg[R21]=2a01 added AMX with default
1
wm8775: Final reset.reg[0]=2e01
wm8775: Final reset.reg[1]=0e00
wm8775: Final reset.reg[2]=1622
wm8775: Final reset.reg[3]=1802
wm8775: Final reset.reg[4]=1a00
wm8775: Final reset.reg[5]=1ccf
wm8775: Final reset.reg[6]=1ecf
wm8775: Final reset.reg[7]=207b
wm8775: Final reset.reg[8]=2200
wm8775: Final reset.reg[9]=2432
wm8775: Final reset.reg[10]=2600
wm8775: Final reset.reg[11]=2826
wm8775: Final reset.reg[12]=2a01
wm8775: Offset reset.reg[0]=2e00
wm8775: Offset reset.reg[1]=0e00
wm8775: Offset reset.reg[2]=1600
wm8775: Offset reset.reg[3]=1800
wm8775: Offset reset.reg[4]=1a00
wm8775: Offset reset.reg[5]=1c00
wm8775: Offset reset.reg[6]=1e00
wm8775: Offset reset.reg[7]=2000
wm8775: Offset reset.reg[8]=2200
wm8775: Offset reset.reg[9]=2400
wm8775: Offset reset.reg[10]=2600
wm8775: Offset reset.reg[11]=2800
wm8775: Offset reset.reg[12]=2a00
wm8775: Updating reg[R23]=2e01 added Reset with
default 1
wm8775: Updating reg[R7]=0e00 added TOD with default 0
wm8775: Updating reg[R11]=1600 added ADCHPD with
default 0
wm8775: Updating reg[R11]=1600 added ADCMCLK with
default 0
wm8775: Updating reg[R11]=1620 added ADCWL with
default 2
wm8775: Updating reg[R11]=1620 added ADCBCP with
default 0
wm8775: Updating reg[R11]=1620 added ADCLRP with
default 0
wm8775: Updating reg[R11]=1622 added ADCFMT with
default 2
wm8775: Updating reg[R12]=1800 added ADCMS with
default 0
wm8775: Updating reg[R12]=1800 added ADCOSR with
default 0
wm8775: Updating reg[R12]=1802 added ADCRATE with
default 2
wm8775: Updating reg[R13]=1a00 added AINPD with
default 0
wm8775: Updating reg[R13]=1a00 added ADCPD with
default 0
wm8775: Updating reg[R13]=1a00 added PWDN with default
0
wm8775: Updating reg[R14]=1c00 added ZCLA with default
0
wm8775: Updating reg[R14]=1ccf added LAG with default
207
wm8775: Updating reg[R15]=1e00 added ZCRA with default
0
wm8775: Updating reg[R15]=1ecf added RAG with default
207
wm8775: Updating reg[R16]=2000 added LCSEL with
default 0
wm8775: Updating reg[R16]=2070 added MAXGAIN with
default 7
wm8775: Updating reg[R16]=207b added LCT with default
11
wm8775: Updating reg[R17]=2200 added LCEN with default
0
wm8775: Updating reg[R17]=2200 added ALCZC with
default 0
wm8775: Updating reg[R17]=2200 added HLD with default
0
wm8775: Updating reg[R18]=2430 added DCY with default
3
wm8775: Updating reg[R18]=2432 added ATK with default
2
wm8775: Updating reg[R19]=2600 added NGTH with default
0
wm8775: Updating reg[R19]=2600 added NGAT with default
0
wm8775: Updating reg[R20]=2820 added TRANWIN with
default 2
wm8775: Updating reg[R20]=2826 added MAXATTEN with
default 6
wm8775: Updating reg[R21]=2a00 added LRBOTH with
default 0
wm8775: Updating reg[R21]=2a00 added MUTELA with
default 0
wm8775: Updating reg[R21]=2a00 added MUTERA with
default 0
wm8775: Updating reg[R21]=2a01 added AMX with default
1
wm8775: Final reset.reg[0]=2e01
wm8775: Final reset.reg[1]=0e00
wm8775: Final reset.reg[2]=1622
wm8775: Final reset.reg[3]=1802
wm8775: Final reset.reg[4]=1a00
wm8775: Final reset.reg[5]=1ccf
wm8775: Final reset.reg[6]=1ecf
wm8775: Final reset.reg[7]=207b
wm8775: Final reset.reg[8]=2200
wm8775: Final reset.reg[9]=2432
wm8775: Final reset.reg[10]=2600
wm8775: Final reset.reg[11]=2826
wm8775: Final reset.reg[12]=2a01
wm8775: Setting register ADCFMT (7) to 1, R11.0..1,
old value 02
wm8775: Setting register ADCMS (8) to 1, R12.8..8, old
value 00
wm8775: Setting register DCY (24) to 8, R18.4..7, old
value 03
wm8775: Setting register NGAT (27) to 1, R19.0..0, old
value 00
wm8775: Setting register LRBOTH (30) to 1, R21.8..8,
old value 00
wm8775: Setting register AMX (33) to 15, R21.0..3, old
value 01
wm8775: Updating register 0 (R23), config: 2e01
active: 2e00.
wm8775: Skipping register 1 (R7), config: 0e00 active:
0e00.
wm8775: Updating register 2 (R11), config: 1622
active: 1621.
wm8775: Updating register 3 (R12), config: 1802
active: 1902.
wm8775: Skipping register 4 (R13), config: 1a00
active: 1a00.
wm8775: Skipping register 5 (R14), config: 1ccf
active: 1ccf.
wm8775: Skipping register 6 (R15), config: 1ecf
active: 1ecf.
wm8775: Skipping register 7 (R16), config: 207b
active: 207b.
wm8775: Skipping register 8 (R17), config: 2200
active: 2200.
wm8775: Updating register 9 (R18), config: 2432
active: 2482.
wm8775: Updating register 10 (R19), config: 2600
active: 2601.
wm8775: Skipping register 11 (R20), config: 2826
active: 2826.
wm8775: Updating register 12 (R21), config: 2a01
active: 2b0f.
ivtv: i2c client attach
ivtv: i2c attach [client=wm8775[0],ok]
tda9885/6/7: chip found @ 0x86
ivtv: i2c client attach
ivtv: i2c attach [client=tda9887,ok]
ivtv: Active card count: 1.
ivtv: Loaded module tveeprom
ivtv: call_i2c_client
ivtv: skipping client 0, addr 0x61
ivtv: skipping client 1, addr 0x44
ivtv: skipping client 2, addr 0x1b
ivtv: skipping client 3, addr 0x43
ivtv: no client 4 found
ivtv: no client 5 found
ivtv: no client 6 found
ivtv: no client 7 found
ivtv: no client 8 found
ivtv: no client 9 found
ivtv: no client 10 found
ivtv: no client 11 found
ivtv: no client 12 found
ivtv: no client 13 found
ivtv: no client 14 found
ivtv: no client 15 found
ivtv: i2c client addr: 0x50 not found!
ivtv: Error -19 reading Hauppauge eeprom.
ivtv: Possible causes: the tveeprom module was not
loaded, or
ivtv: the eeprom kernel module was loaded before the
tveeprom module.
ivtv: Loaded module tuner
ivtv: Loaded module cx25840
ivtv: Loaded module wm8775
ivtv: Loaded module tda9887
ivtv: Stopping VDM
ivtv: Stopping AO
ivtv: pinging (?) APU
ivtv: Stopping VPU
ivtv: Resetting Hw Blocks
ivtv: Stopping SPU
ivtv: Sleeping for 10ms
ivtv: init Encoder SDRAM pre-charge
ivtv: init Encoder SDRAM refresh to 1us
ivtv: init Decoder SDRAM pre-charge
ivtv: init Decoder SDRAM refresh to 1us
ivtv: Sleeping for 600ms (600 recommended)
ivtv: Card ready for firmware!
ivtv: Loading encoder image
ivtv: Sleeping for 10 ms
ivtv: Sleeping for 10 ms
ivtv: GPIO INIT
ivtv: About to search for mailboxes
ivtv: Searching for encoder mailbox
ivtv: .ivtv: match: 0x34567812 at 0xdd000104. match: 1
ivtv: match: 0x56781234 at 0xdd000108. match: 2
ivtv: match: 0x78123456 at 0xdd00010c. match: 3
ivtv: found encoder mailbox!
ivtv: Searching for decoder mailbox
ivtv: .ivtv: match: 0x34567812 at 0xdd880104. match: 1
ivtv: match: 0x56781234 at 0xdd880108. match: 2
ivtv: match: 0x78123456 at 0xdd88010c. match: 3
ivtv: found decoder mailbox!
ivtv: Getting firmware version..
ivtv: Getting encoder firmware rev.
ivtv: API Call: 0x000000c4
ivtv: got new mailbox: 0 after 0 tries
ivtv: [0]result not ready, waiting 10 ms
ivtv: Releasing mailbox (before 0x00000007, ivtv:
after 0x00000000)
ivtv: Encoder revision: 0x02050032
ivtv: Encoder Firmware may be buggy, use version
0x02040011
ivtv: v4l2 streams setup
ivtv: Configuring WinTV PVR 150 card with 4 streams
ivtv: Create DMA stream 0 using 256 16384 byte buffers
4194304 kbytes total
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 1
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create stream 2 using 40 52224 byte buffers
2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 3 using 455 4608 byte buffers
2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Starting Threads
ivtv: Masking interrupts
ivtv: call_i2c_client
ivtv: skipping client 0, addr 0x61
ivtv: using client 1, addr 0x44
ivtv: v4l2 ioctl: set standard
ivtv: Switching standard to SECAM.
ivtv: call_i2c_client
ivtv: using client 0, addr 0x61, id 0x02
ivtv: call_i2c_client
ivtv: skipping client 0, addr 0x61
ivtv: skipping client 1, addr 0x44
ivtv: skipping client 2, addr 0x1b
ivtv: using client 3, addr 0x43
tda9885/6/7: insmod fixup: SECAM => SECAM-L
tda9885/6/7: configure for: SECAM-L
tda9885/6/7: writing: b=0x04 c=0x10 e=0x0b
ivtv: call_i2c_client
ivtv: skipping client 0, addr 0x61
ivtv: using client 1, addr 0x44
ivtv: Initialized WinTV PVR 150, card #0
ivtv: ==================== END INIT IVTV
====================
ivtv: ivtv_enc_thread: pid = 4569, itv = 0xdcf42820
ivtv: encoder thread sleeping 4569
D�couvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails !
Cr�ez votre Yahoo! Mail sur http://fr.mail.yahoo.com/
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
