Sadly no, this doesn't seem to make a noticable difference. buck:~/ivtv-0.3.2h/utils$ ivtvctl -p6 -u1 -d/dev/video0 ioctl: VIDIOC_S_STD Standard set to 00000001 ioctl: VIDIOC_S_INPUT Input set to 6 buck:~/ivtv-0.3.2h/utils$ ivtvctl -p7 -u1 -d/dev/video0 ioctl: VIDIOC_S_STD Standard set to 00000001 ioctl: VIDIOC_S_INPUT Input set to 7 buck:~/ivtv-0.3.2h/utils$ ivtvctl -p6 -u1 -d/dev/video0 ioctl: VIDIOC_S_STD Standard set to 00000001 ioctl: VIDIOC_S_INPUT Input set to 6
Sometimes I get basic mono audio, with the following messages. Mar 9 07:46:29 buck kernel: cx25840: Status: 'Mono' (Detected audio mode) Mar 9 07:46:29 buck kernel: cx25840: Status: 'A2-BG' (Detected audio standard) What I would like to do is set the audio standard to NICAM, which is available on all channels here, if it cannot be auto detected correctly. On my PVR-250 on another machine with ivtv 0.1.9 I use insmod $IVTV/msp3400.o standard=0x08 But that doesn't seem to work with 0.3.2h with the PVR500? Stephen. On Tue, 2005-03-08 at 11:58 +0100, Jelte van der Hoek wrote: > Do you have any audio at all? > > Try sending these commands: > > ivtvctl -p6 -u1 -d/dev/video0 > ivtvctl -p7 -u1 -d/dev/video0 > ivtvctl -p6 -u1 -d/dev/video0 > > Does the audio get better? > > -Jelte > > > On Tue, 2005-03-08 at 11:45, Nipper wrote: > > Hi, > > > > Using 0.3.2h unpatched, I'm unable to get audio running reliably. I am > > in New Zealand, where we have PAL B/G, with NICAM. My PVR-250 is running > > with this okay. > > > > I am currently loading ivtv with insmod driver/ivtv.ko tuner=56,56 > > i2c_enable=1,1,-1,-1,-1,-1,-1,-1 > > > > >From /var/log/messages (kernel name stripped for readability): > > > > ivtv: ==================== START INIT IVTV ==================== > > ivtv: version 0.3.2 (h) loading > > ivtv: Linux version: 2.6.10 preempt K7 gcc-3.3 > > ivtv: In case of problems please include the debug info > > ivtv: between the START INIT IVTV and END INIT IVTV lines when > > ivtv: mailing the ivtv-devel mailinglist. > > ivtv: Autodetected WinTV PVR 150 card > > ivtv: Found an iTVC16 based chip > > ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 17 (level, low) -> IRQ 17 > > ivtv: VIA PCI device: 0x3189 vendor: 0x1106 > > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 > > ivtv: i2c attach [client=(tuner unset),ok] > > ivtv: i2c attach [client=wm8775[56],ok] > > tveeprom: Hauppauge: model = 23559, rev = D391, serial# = 7742974 > > tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 4) > > tveeprom: tuner fmt = PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) > > tveeprom: audio_processor = MSP3410D (type = 5) > > ivtv: i2c attach [client=tveeprom[50],ok] > > cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 13883 loaded. > > cx25840: FW image md5 digest: a6f6a90a3be338cdb89d59e835798408 > > cx25840: FW image sha1 digest: ad2872fb98ad43b6c4afa45d239a57010edebe84 > > ivtv: i2c attach [client=cx25840[4],ok] > > ivtv: Tuner Type 4, Tuner formats 0x00400e17, Radio: yes, Model > > 0x00913651, Revision 0x00000000 > > ivtv: PAL tuner detected > > ivtv: SECAM tuner detected > > ivtv: Radio detected > > ivtv: Encoder revision: 0x02040011 > > ivtv: Configuring WinTV PVR 150 card with 5 streams > > ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes > > total > > ivtv: Registered v4l2 device, streamtype 0 minor 0 > > ivtv: Create DMA stream 1 > > ivtv: Registered v4l2 device, streamtype 1 minor 32 > > ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total > > ivtv: Registered v4l2 device, streamtype 2 minor 224 > > ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes > > total > > ivtv: Registered v4l2 device, streamtype 3 minor 24 > > ivtv: Create stream 4 > > ivtv: Registered v4l2 device, streamtype 4 minor 64 > > ivtv: Setting Tuner 56 > > tuner: type set to 56 (Philips PAL/SECAM multi (FM1216ME pvr150)) by > > ivtv i2c driver #0 > > ivtv: ivtv_enc_thread: pid = 21436, itv = 0xe21ca220 > > ivtv: Switching standard to PAL. > > ivtv: Initialized WinTV PVR 150, card #0 > > ivtv: Autodetected WinTV PVR 150 card > > ivtv: Found an iTVC16 based chip > > ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 18 (level, low) -> IRQ 18 > > ivtv: VIA PCI device: 0x3189 vendor: 0x1106 > > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 > > ivtv: i2c attach [client=(tuner unset),ok] > > ivtv: i2c attach [client=wm8775[57],ok] > > tveeprom: Hauppauge: model = 23559, rev = D391, serial# = 7742974 > > tveeprom: tuer = Philips FQ1216AME MK4 (idx = 91, type = 4) > > tveeprom: tuner fmt = PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) > > tveeprom: audio_processor = MSP3410D (type = 5) > > ivtv: i2c attach [client=tveeprom[51],ok] > > cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 13883 loaded. > > cx25840: FW image md5 digest: a6f6a90a3be338cdb89d59e835798408 > > cx25840: FW image sha1 digest: ad2872fb98ad43b6c4afa45d239a57010edebe84 > > ivtv: i2c attach [client=cx25840[5],ok] > > ivtv: Tuner Type 4, Tuner formats 0x00400e17, Radio: yes, Model > > 0x00913651, Revision 0x00000000 > > ivtv: PAL tuner detected > > ivtv: SECAM tuner detected > > ivtv: Radio detected > > ivtv: Encoder revision: 0x02040011 > > ivtv: Configuring WinTV PVR 150 card with 5 streams > > ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes > > total > > ivtv: Registered v4l2 device, streamtype 0 minor 1 > > ivtv: Create DMA stream 1 > > ivtv: Registered v4l2 device, streamtype 1 minor 33 > > ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total > > ivtv: Registered v4l2 device, streamtype 2 minor 225 > > ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes > > total > > ivtv: Registered v4l2 device, streamtype 3 minor 25 > > ivtv: Create stream 4 > > ivtv: Registered v4l2 device, streamtype 4 minor 65 > > ivtv: Setting Tuner 56 > > tuner: type set to 56 (Philips PAL/SECAM multi (FM1216ME pvr150)) by > > ivtv i2c driver #1 > > ivtv: ivtv_enc_thread: pid = 21497, itv = 0xe21de4ec > > ivtv: Switching standard to PAL. > > ivtv: Initialized WinTV PVR 150, card #1 > > ivtv: ==================== END INIT IVTV ==================== > > > > cx25840: Status: 0x03 (REV_ID, Revision ID.) > > cx25840: Status: 'Mono' (Detected audio mode) > > cx25840: Status: 'No detected audio standard' (Detected audio standard) > > cx25840: Status: Video signal present > > cx25840: Status: 0x04 (MICROCNTL_VIDEO_FORMAT, Detected video format) > > cx25840: Status: Ready Filter auto tuning status > > cx25840: Status: 0x16 (TUNE_OUT, The tuning code selected by the > > auto-tune algorithm.) > > cx25840: Status: 0x00 (MV_CDAT, Macrovision Copy Control Bits as > > described in the MacroVision) > > cx25840: Status: 0x00 (MV_PSP, Macrovision Pseudo Sync Pulses detected) > > cx25840: Status: 0x00 (MV_CS, Macrovision Color Striping Detected) > > cx25840: Status: 0x00 (MV_T3CS, A 1 indicates the presence of type 3 of > > the color stripe process. A) > > cx25840: Status: 0x00 (MV_TYPE2_PAIR, Macrovision Type 2 pair detected) > > cx25840: Status: 0x04 (AFD_FMT_STAT, Currently detected Format) > > cx25840: Status: 0x01 (FIELD, Field status (even/odd)) > > cx25840: Status: 0x00 (SRC_FIFO_OFLOW, Sample Rate Converter FIFO > > Overflow) > > cx25840: Status: 0x00 (SRC_FIFO_UFLOW, Sample Rate Converter FIFO > > Underflow) > > cx25840: Status: 0x01 (VSYNC, Vertical sync) > > cx25840: Status: 0x01 (HLOCK, Horizontal lock status) > > cx25840: Status: 0x00 (SRC_LOCK, Sample Rate Converter lock Status) > > cx25840: Status: 0x01 (VLOCK, Vertical lock status) > > cx25840: Status: 0x00 (CSC_LOCK, Color Subcarrier lock status) > > cx25840: Status: 0x01 (AGC_LOCK, VGA lock status) > > cx25840: Status: 0x01 (VPRES, Active-high video present. Indication of > > the presence of a) > > cx25840: Status: 0x01 (SPECIAL_PLAY_N, Active-low special play mode > > (fast forward, rewind, pulse, or slow) > > cx25840: Status: 0x03 (REV_ID, Revision ID.) > > cx25840: Status: 'Mono' (Detected audio mode) > > cx25840: Status: 'No detected audio standard' (Detected audio standard) > > cx25840: Status: Video signal present > > cx25840: Status: 0x04 (MICROCNTL_VIDEO_FORMAT, Detected video format) > > cx25840: Status: Ready Filter auto tuning status > > cx25840: Status: 0x16 (TUNE_OUT, The tuning code selected by the > > auto-tune algorithm.) > > cx25840: Status: 0x00 (MV_CDAT, Macrovision Copy Control Bits as > > described in the MacroVision) > > cx25840: Status: 0x00 (MV_PSP, Macrovision Pseudo Sync Pulses detected) > > cx25840: Status: 0x00 (MV_CS, Macrovision Color Striping Detected) > > cx25840: Status: 0x00 (MV_T3CS, A 1 indicates the presence of type 3 of > > the color stripe process. A) > > cx25840: Status: 0x00 (MV_TYPE2_PAIR, Macrovision Type 2 pair detected) > > cx25840: Status: 0x04 (AFD_FMT_STAT, Currently detected Format) > > cx25840: Status: 0x01 (FIELD, Field status (even/odd)) > > cx25840: Status: 0x00 (SRC_FIFO_OFLOW, Sample Rate Converter FIFO > > Overflow) > > cx25840: Status: 0x00 (SRC_FIFO_UFLOW, Sample Rate Converter FIFO > > Underflow) > > cx25840: Status: 0x01 (VSYNC, Vertical sync) > > cx25840: Status: 0x01 (HLOCK, Horizontal lock status) > > cx25840: Status: 0x00 (SRC_LOCK, Sample Rate Converter lock Status) > > cx25840: Status: 0x01 (VLOCK, Vertical lock status) > > cx25840: Status: 0x00 (CSC_LOCK, Color Subcarrier lock status) > > cx25840: Status: 0x01 (AGC_LOCK, VGA lock status) > > cx25840: Status: 0x01 (VPRES, Active-high video present. Indication of > > the presence of a) > > cx25840: Status: 0x01 (SPECIAL_PLAY_N, Active-low special play mode > > (fast forward, rewind, pulse, or slow) > > cx25840: decoder disable output > > cx25840: Status: 0x03 (REV_ID, Revision ID.) > > cx25840: Status: 'Mono' (Detected audio mode) > > cx25840: Status: 'No detected audio standard' (Detected audio standard) > > cx25840: Status: Video signal present > > cx25840: Status: 0x04 (MICROCNTL_VIDEO_FORMAT, Detected video format) > > cx25840: Status: Ready Filter auto tuning status > > cx25840: Status: 0x16 (TUNE_OUT, The tuning code selected by the > > auto-tune algorithm.) > > cx25840: Status: 0x00 (MV_CDAT, Macrovision Copy Control Bits as > > described in the MacroVision) > > cx25840: Status: 0x00 (MV_PSP, Macrovision Pseudo Sync Pulses detected) > > cx25840: Status: 0x00 (MV_CS, Macrovision Color Striping Detected) > > cx25840: Status: 0x00 (MV_T3CS, A 1 indicates the presence of type 3 of > > the color stripe process. A) > > cx25840: Status: 0x00 (MV_TYPE2_PAIR, Macrovision Type 2 pair detected) > > cx25840: Status: 0x04 (AFD_FMT_STAT, Currently detected Format) > > cx25840: Status: 0x01 (FIELD, Field status (even/odd)) > > cx25840: Status: 0x00 (SRC_FIFO_OFLOW, Sample Rate Converter FIFO > > Overflow) > > cx25840: Status: 0x00 (SRC_FIFO_UFLOW, Sample Rate Converter FIFO > > Underflow) > > cx25840: Status: 0x01 (VSYNC, Vertical sync) > > cx25840: Status: 0x01 (HLOCK, Horizontal lock status) > > cx25840: Status: 0x00 (SRC_LOCK, Sample Rate Converter lock Status) > > cx25840: Status: 0x01 (VLOCK, Vertical lock status) > > cx25840: Status: 0x00 (CSC_LOCK, Color Subcarrier lock status) > > cx25840: Status: 0x01 (AGC_LOCK, VGA lock status) > > cx25840: Status: 0x01 (VPRES, Active-high video present. Indication of > > the presence of a) > > cx25840: Status: 0x01 (SPECIAL_PLAY_N, Active-low special play mode > > (fast forward, rewind, pulse, or slow) > > cx25840: decoder enable output > > cx25840: Enable > > > > > > Regards, > > Stephen. > > > > ------------------------------------------------------- > SF email is sponsored by - The IT Product Guide > Read honest & candid reviews on hundreds of IT Products from real users. > Discover which products truly live up to the hype. Start reading now. > http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click > _______________________________________________ > ivtv-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/ivtv-devel > -- Nipper <[EMAIL PROTECTED]> ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
