Hi, I'm having some problems getting the ivtv-fb driver to work on my system. I have a PVR-350 and I'm trying to use it for my output device. I'm using ivtv-0.3.2i with the 1.18.21.22301 firmware. Encoding works great, decoding works great.
I'm now trying to get the OSD working, and every time I load the ivtv-fb module my system hangs... complete lock-up and I have to reboot. Here is all I get in the logs when it happens: ivtv-osd: Framebuffer module loaded (attached to ivtv card id 0) ivtv-osd: Framebuffer is at decoder-relative address 0x00510000 and has 1704960 bytes. ivtv-osd: screen coords: [0 0] -> [720 480] ivtv-osd: original global alpha = 208 ivtv-osd: current OSD state = 39 ivtv-osd: new global alpha = 208 (1 255 0) ivtv-osd: framebuffer at 0xe5510000, mapped to 0xdd890000, size 1350k ivtv-osd: mode is 720x480x32, linelength=2880 Console: switching to colour frame buffer device 90x30 ivtv-osd: fb0: iTVC15 TV out frame buffer device The screen now has a black & white pattern on it that looks something like: _________________________ _|_______________________ ____|____________________ _______|_________________ __________|______________ _____________|___________ ________________|________ ___________________|_____ ______________________|__ (I can follow-up with a picture if anyone wants to see it) At this point the machine completely locks up. Has anyone else experienced this? Any solutions, suggestions, pointers, module options that I should be looking in to? Thanks in advance! David -- [EMAIL PROTECTED] | http://xdal.org/~benoit/ ... whatever "The most useless computer tasks are the most fun to do." Here is the IVTV modprobe info: ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.2 (i) loading ivtv: Linux version: 2.6.9-1-686 preempt 686 gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 350 card ivtv: Found an iTVC15 based chip ACPI: PCI interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 169 ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: VIA PCI device: 0x3205 vendor: 0x1106 saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) saa7115: detecting saa7115 client on address 0x42 saa7115: writing init values ivtv: i2c attach [client=saa7115[0],ok] saa7115: status: (1E) 0x48, (1F) 0xc0 tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) by insmod option tuner: The type=<n> insmod option will go away soon. tuner: Please use the tuner=<n> option provided by tuner: tv aard core driver (bttv, saa7134, ...) instead. tveeprom: Hauppauge: model = 48132, rev = J323, serial# = 2754901 tveeprom: tuner = Philips FM1236 (idx = 23, type = 2) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio_processor = MSP3440 (type = 11) ivtv: i2c attach [client=tveeprom[0],ok] ivtv: Tuner Type 2, Tuner formats 0x00001000, Radio: yes, Model 0x00a93493, Revision 0x00000001 ivtv: NTSC tuner detected ivtv: Radio detected saa7127: Ignoring new-style parameters in presence of obsolete ones saa7127: video encoder driver version V 0.3 loaded saa7127: detecting saa7127 client on address 0x88 saa7127: Selecting NTSC video Standard saa7127: Selecting S-Video+Composite saa7127: Turn WSS off saa7127: Widescreen Mode 4:3 Full Format saa7127: Selecting Normal Encoder Input saa7127: Enable Video Output ivtv: i2c attach [client=saa7127[0],ok] msp34xx: ivtv version msp34xx: init: chip=MSP3448W-A2, has NICAM support, simple (D) mode, simpler (G) no-thread mode msp34xx: $Id$ compiled on: Mar 11 2005 09:35:35 ivtv: i2c attach [client=MSP3448W-A2,ok] ivtv: Encoder revision: 0x02050032 ivtv: Encoder Firmware may be buggy, use version 0x02040011 ivtv: Decoder revision: 0x02020023 ivtv: Configuring WinTV PVR 350 card with 10 streams ivtv: Create DMA stream 0 using 1024 16384 byte buffers 16777216 kbytes total ivtv: Registered v4l2 device, streamtype 0 minor 0 ivtv: Create DMA stream 1 ivtv: Registered v4l2 device, streamtype 1 minor 32 ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 2 minor 224 ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 24 ivtv: Create stream 4 ivtv: Registered v4l2 device, streamtype 4 minor 64 ivtv: Create DMA stream 5 using 16 65536 byte buffers 1048576 kbytes total ivtv: Registered v4l2 device, streamtype 5 minor 16 ivtv: Create stream 6 using 1024 2048 byte buffers 262144 kbytes total ivtv: Registered v4l2 device, streamtype 6 minor 228 ivtv: Create stream 7 ivtv: Registered v4l2 device, streamtype 7 minor 232 ivtv: Create DMA stream 8 using 6 86400 byte buffers 518400 kbytes total ivtv: Registered v4l2 device, streamtype 8 minor 48 ivtv: Create DMA stream 9 using 32 65536 byte buffers 2097152 kbytes total ivtv: Setting Tuner 2 saa7115: decoder set input (4) saa7115: now setting Composite input ivtv: Setting audio matrix to input 3, output 1 ivtv: Switching standard to NTSC. ivtv: ivtv_enc_thread: pid = 981, itv = 0xdc9e9180 ivtv: ivtv_dec_thread: pid = 982, itv = 0xdc9e9180 saa7115: decoder set norm NTSC saa7115: set audio: 0x01 saa7127: Setting Encoder Video Standard saa7127: Set NTSC Video Mode saa7127: Selecting NTSC video Standard ivtv: Initialized WinTV PVR 350, card #0 ivtv: ==================== END INIT IVTV ====================
signature.asc
Description: Digital signature
