From 0.3.4c after 2 minutes LiveTV:ivtv: ENC Stream 6 OVERFLOW #86: Stealing a Buffer, 1024 currently allocated
ivtv: ENC Stream 2 OVERFLOW #9211: Stealing a Buffer, 322 currently allocated
I noticed in these releases rewind/forward locks LiveTV (TV-Out). Restarting mythfrontend works.
Tweaking the buffers for VBI 4 times more didn't help.
Release 0.2.0-rc3j rewind/forward is stable. But for example Play 3x can give a black screen.
Sound is there. Switching back to myth and back to LiveTV still a black screen with sound.
If I can be of any help please let me know.
Pierre
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.4 (c) loading
ivtv: Linux version: 2.6.11.4-20a-default 586 REGPARM gcc-3.3
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 350 card
ivtv: Found an iTVC15 based chip ACPI: PCI interrupt 0000:05:04.0[A] -> GSI 5 (level, low) -> IRQ 5
ivtv: XXX PCI device: 0x2560 vendor: 0x8086
tveeprom: Hauppauge: model = 48139, rev = K257, serial# = 7805538
tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38)
tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
tveeprom: audio_processor = CS5331 (type = 9)
ivtv: i2c attach [client=tveeprom[50],ok]
ivtv: Tuner Type 38, Tuner formats 0x00400e17, Radio: yes, Model 0x00ad2557, Revision 0x00000001
ivtv: PAL tuner detected
ivtv: SECAM tuner detected
ivtv: Radio detected
tuner: Ignoring new-style parameters in presence of obsolete ones
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115[50],ok]
saa7115: status: (1E) 0x00, (1F) 0xc0
saa7127: Ignoring new-style parameters in presence of obsolete ones
saa7127: video encoder driver version V 0.3 loaded
saa7127: detecting saa7127 client on address 0x88
saa7127: Selecting NTSC video Standard
saa7127: Selecting S-Video+Composite
saa7127: Turn WSS off
saa7127: Widescreen Mode 4:3 Full Format
saa7127: Selecting Normal Encoder Input
saa7127: Enable Video Output
ivtv: i2c attach [client=saa7127[50],ok]
msp34xx: ivtv version
msp34xx: init: chip=MSP3418W-B3, has NICAM support, simple (D) mode, simpler (G) no-thread mode
msp34xx: $Id$ compiled on: May 7 2005 18:05:57
ivtv: i2c attach [client=MSP3418W-B3,ok]
tda9885/6/7: chip found @ 0x86
ivtv: i2c attach [client=tda9887,ok]
ivtv: Encoder revision: 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Configuring WinTV PVR 350 card with 10 streams
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create DMA stream 1 using 20 103680 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 2 using 40 52224 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Create stream 4
ivtv: Registered v4l2 device, streamtype 5 minor 16
ivtv: Create DMA stream 5 using 16 65536 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 6 minor 228
ivtv: Create DMA stream 6 using 1024 2048 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 7 minor 232
ivtv: Create stream 7
ivtv: Registered v4l2 device, streamtype 8 minor 48
ivtv: Create DMA stream 8 using 20 103680 byte buffers 0 kbytes total
ivtv: Create DMA stream 9 using 32 65536 byte buffers 0 kbytes total
ivtv: Setting Tuner 38
tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv i2c driver #0
saa7115: decoder set input (4)
saa7115: now setting Composite input
ivtv: Setting audio matrix to input 3, output 1
ivtv: Switching standard to PAL.
ivtv: ivtv_enc_thread: pid = 5408, itv = 0xe0e533a0
ivtv: ivtv_dec_thread: pid = 5409, itv = 0xe0e533a0
saa7115: decoder set norm PAL
saa7115: set audio: 0x01
saa7127: Setting Encoder Video Standard
saa7127: Set PAL Video Mode
saa7127: Selecting PAL video Standard
ivtv: Initialized WinTV PVR 350, card #0
ivtv: ==================== END INIT IVTV ====================
ivtv-osd: Framebuffer module loaded (attached to ivtv card id 0)
ivtv-osd: Framebuffer is at decoder-relative address 0x00510000 and has 1704960 bytes.
ivtv-osd: screen coords: [0 0] -> [720 576]
ivtv-osd: original global alpha = 208
ivtv-osd: current OSD state = 39
ivtv-osd: new global alpha = 208 (1 255 0)
ivtv-osd: framebuffer at 0xed510000, mapped to 0xe1c90000, size 1620k
ivtv-osd: mode is 720x576x32, linelength=2880
ivtv-osd: fb1: iTVC15 TV out frame buffer device
ivtv: Allocate DMA stream 9 using 32 65536 byte buffers 2097152 kbytes total
lirc_dev: IR Remote Control driver registered, at major 60
bttv: disagrees about version of symbol tveeprom_read
bttv: Unknown symbol tveeprom_read, st_info == 0x1
load_module: err 0xfffffffe (dont worry)
lirc_i2c: chip found @ 0x18 (Hauppauge IR)
ivtv: i2c attach [client=Hauppauge IR,ok]
lirc_dev: lirc_register_plugin:sample_rate: 10
------------------------------------------------------- This SF.Net email is sponsored by: NEC IT Guy Games. Get your fingers limbered up and give it your best shot. 4 great events, 4 opportunities to win big! Highest score wins.NEC IT Guy Games. Play to win an NEC 61 plasma display. Visit http://www.necitguy.com/?r=20 _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
