Well I'm out of ideas, if anyone has any others I'm keen to try them. No matter what I do, the 3rd PVR-card always fails to initialize. What I've done so far:
- played with the i2c_enable settings for both cx25840 and saa7127 - moved PVR-cards to different slots - moved order of PVR-cards (no matter which order, the 3rd cards fails initialization) - removed all PCI-cards but the PVR-cards - compiled i2c and v4l in kernel in stead of as modules So still stuck; got a 3rd PVR-card I know works but fails to initialize. Any help is welcome. N. On 5/14/05, Nick Rosier <[EMAIL PROTECTED]> wrote: > I just added another PVR150MCE (PAL) to my system but I have trouble > getting this setup to work; the detection order of the cards is: 350, > new 150, old 150. Initialisation of the 350 and new 150 works fine but > the old 150 won't initialize properly anymore: > > ivtv: i2c client addr: 0x50 not found! > ivtv: Error -19 reading Hauppauge eeprom. > ivtv: Possible causes: the tveeprom module was not loaded, or > ivtv: the eeprom kernel module was loaded before the tveeprom module. > > tveeprom module is loaded (it's used for the 2 other cards) and kernel > eeprom is not loaded so can't be that... > Seeing as it's my old card which worked fine before, I doubt it's a HW > problem. > Anyone got any ideas? > > N. > > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.3.4 (o) loading > ivtv: Linux version: 2.6.11-gentoo-r6 preempt K8 4KSTACKS gcc-3.4 > ivtv: In case of problems please include the debug info > ivtv: between the START INIT IVTV and END INIT IVTV lines when > ivtv: mailing the ivtv-devel mailinglist. > ivtv: Autodetected WinTV PVR 350 card > ivtv: Found an iTVC15 based chip > ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 17 (level, low) -> IRQ 17 > ivtv: XXX PCI device: 0x00e1 vendor: 0x10de > tveeprom: Hauppauge: model = 48139, rev = K257, serial# = 7597218 > tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38) > tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = > 0x74, v4l2 = 0x00400e17) > tveeprom: audio_processor = CS5331 (type = 9) > ivtv: i2c attach [client=tveeprom[50],ok] > saa7127: detecting saa7127 client on address 0x88 > saa7127: Selecting NTSC video Standard > saa7127: Selecting S-Video+Composite > saa7127: Turn WSS off > saa7127: Widescreen Mode 4:3 Full Format > saa7127: Selecting Normal Encoder Input > saa7127: Enable Video Output > ivtv: i2c attach [client=saa7127[50],ok] > msp34xx: ivtv version > msp34xx: init: chip=MSP3418W-B3, has NICAM support, simple (D) mode, > simpler (G) no-thread mode > msp34xx: $Id$ compiled on: May 13 2005 01:29:43 > ivtv: i2c attach [client=MSP3418W-B3,ok] > ivtv: Tuner Type 38, Tuner formats 0x00400e17, Radio: yes, Model > 0x00ad2557, Revision 0x00000001 > ivtv: Radio detected > tuner: Ignoring new-style parameters in presence of obsolete ones > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 > ivtv: i2c attach [client=(tuner unset),ok] > saa7115: starting probe for adapter SMBus nForce2 adapter at 4c00 (0x0) > saa7115: starting probe for adapter SMBus nForce2 adapter at 4c40 (0x0) > saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) > saa7115: detecting saa7115 client on address 0x42 > saa7115: writing init values > ivtv: i2c attach [client=saa7115[50],ok] > saa7115: status: (1E) 0x48, (1F) 0xc0 > tda9885/6/7: chip found @ 0x86 > ivtv: i2c attach [client=tda9887,ok] > ivtv: Encoder revision: 0x02040011 > ivtv: Decoder revision: 0x02020023 > ivtv: Configuring WinTV PVR 350 card with 10 streams > ivtv: Registered v4l2 device, streamtype 0 minor 0 > ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 1 minor 32 > ivtv: Create DMA stream 1 using 20 103680 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 2 minor 224 > ivtv: Create DMA stream 2 using 40 52224 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 3 minor 24 > ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 4 minor 64 > ivtv: Create stream 4 > ivtv: Registered v4l2 device, streamtype 5 minor 16 > ivtv: Create DMA stream 5 using 16 65536 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 6 minor 228 > ivtv: Create DMA stream 6 using 14563 144 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 7 minor 232 > ivtv: Create stream 7 > ivtv: Registered v4l2 device, streamtype 8 minor 48 > ivtv: Create DMA stream 8 using 20 103680 byte buffers 0 kbytes total > ivtv: Create DMA stream 9 using 32 65536 byte buffers 0 kbytes total > ivtv: Setting Tuner 38 > tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv > i2c driver #0 > saa7115: decoder set input (4) > saa7115: now setting Composite input > ivtv: Setting audio matrix to input 3, output 1 > ivtv: Switching standard to PAL. > ivtv: ivtv_enc_thread: pid = 30119, itv = 0xe0b28120 > ivtv: ivtv_dec_thread: pid = 30120, itv = 0xe0b28120 > saa7115: decoder set norm PAL > saa7115: set audio: 0x01 > saa7127: Setting Encoder Video Standard > saa7127: Set PAL Video Mode > saa7127: Selecting PAL video Standard > ivtv: Initialized WinTV PVR 350, card #0 > ivtv: Autodetected WinTV PVR 150 card > ivtv: Found an iTVC16 based chip > ACPI: PCI interrupt 0000:02:0a.0[A] -> GSI 18 (level, low) -> IRQ 18 > ivtv: XXX PCI device: 0x00e1 vendor: 0x10de > tveeprom: Hauppauge: model = 26559, rev = C260, serial# = 7931265 > tveeprom: tuner = LG S001D MK3 (idx = 60, type = 58) > tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = > 0x74, v4l2 = 0x00400e17) > tveeprom: audio_processor = MSP3410D (type = 5) > ivtv: i2c attach [client=tveeprom[50],ok] > saa7127: detecting saa7127 client on address 0x88 > saa7127: Selecting NTSC video Standard > saa7127: Selecting S-Video+Composite > saa7127: Turn WSS off > saa7127: Widescreen Mode 4:3 Full Format > saa7127: Selecting Normal Encoder Input > saa7127: Enable Video Output > ivtv: i2c attach [client=saa7127[50],ok] > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 > ivtv: i2c attach [client=(tuner unset),ok] > saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005) > tda9885/6/7: chip found @ 0x86 > ivtv: i2c attach [client=tda9887,ok] > ivtv: Tuner Type 58, Tuner formats 0x00400e17, Radio: yes, Model > 0x008d2590, Revision 0x00000001 > ivtv: Radio detected > cx25840: starting probe for adapter SMBus nForce2 adapter at 4c00 (0x0) > cx25840: starting probe for adapter SMBus nForce2 adapter at 4c40 (0x0) > cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005) > cx25840: starting probe for adapter ivtv i2c driver #1 (0x10005) > ivtv: i2c attach [client=wm8775[50],ok] > ivtv: Encoder revision: 0x02040011 > ivtv: Configuring WinTV PVR 150 card with 5 streams > ivtv: Registered v4l2 device, streamtype 0 minor 1 > ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 1 minor 33 > ivtv: Create DMA stream 1 using 20 103680 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 2 minor 225 > ivtv: Create DMA stream 2 using 60 34632 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 3 minor 25 > ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 4 minor 65 > ivtv: Create stream 4 > ivtv: Setting Tuner 58 > tuner: type set to 58 (LG PAL TAPE-S001D) by ivtv i2c driver #1 > ivtv: Switching standard to PAL. > ivtv: Initialized WinTV PVR 150, card #1 > ivtv: Autodetected WinTV PVR 150 card > ivtv: Found an iTVC16 based chip > ACPI: PCI interrupt 0000:02:0b.0[A] -> GSI 19 (level, low) -> IRQ 19 > ivtv: XXX PCI device: 0x00e1 vendor: 0x10de > saa7115: starting probe for adapter ivtv i2c driver #2 (0x10005) > cx25840: starting probe for adapter ivtv i2c driver #2 (0x10005) > ivtv: i2c client addr: 0x50 not found! > ivtv: Error -19 reading Hauppauge eeprom. > ivtv: Possible causes: the tveeprom module was not loaded, or > ivtv: the eeprom kernel module was loaded before the tveeprom module. > ivtv: ivtv_enc_thread: pid = 30307, itv = 0xe0b4b150 > ivtv: Encoder revision: 0x02040011 > ivtv: Configuring WinTV PVR 150 card with 4 streams > ivtv: Registered v4l2 device, streamtype 0 minor 2 > ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 1 minor 34 > ivtv: Create DMA stream 1 using 20 103680 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 2 minor 226 > ivtv: Create DMA stream 2 using 60 34632 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 3 minor 26 > ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total > ivtv: i2c client addr: 0x44 not found! > ivtv: i2c client addr: 0x44 not found! > ivtv: Switching standard to PAL. > ivtv: i2c client id: 0x02 not found! > ivtv: i2c client addr: 0x43 not found! > ivtv: i2c client addr: 0x44 not found! > ivtv: Initialized WinTV PVR 150, card #2 > ivtv: ==================== END INIT IVTV ==================== > > modprobe.conf: > > alias char-major-81 videodev > alias char-major-81-0 ivtv > alias char-major-81-1 ivtv > alias char-major-61 lirc_i2c > > options saa7127 i2c_enable=1,-1,-1 > options wm8775 debug=0 > options tuner pal=G debug=0 > options ivtv ivtv_std=2,2,2 tda9887=0,0,0 ivtv_debug=1 > options tda9887 pal=G debug=0 > install ivtv /sbin/modprobe --ignore-install ivtv ; /sbin/modprobe ivtv-fb > ------------------------------------------------------- This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes! http://ads.osdn.com/?ad_ids93&alloc_id281&op=click _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
