Fredrik, also running Gentoo; to get the 350 detected as card 0, swap the cards from slot. This is my /etc/modules.d/ivtv file for when I was running a PVR-350 + 150 (struggling right now to get a 2nd 150 running as well):
alias char-major-81 videodev alias char-major-81-0 ivtv alias char-major-81-1 ivtv alias char-major-61 lirc_i2c options saa7127 i2c_enable=1,-1 options wm8775 debug=0 options tuner pal=G debug=0 options ivtv ivtv_std=2 tda9887=0 ivtv_debug=1 options tda9887 pal=G debug=0 install ivtv /sbin/modprobe --ignore-install ivtv ; /sbin/modprobe ivtv-fb I autoload i2c_dev, lirc_dev, ivtv and lirc_i2c at boot (don't know if they are all needed but it worked like that and haven't bothered checking into that :-) ). I also get those X-errors but they shouldn't cause you problems. I think it's the ivtv-fb driver that isn't loaded correctly. Do you get horizontal bars on the screen when the driver loads? N. On 5/18/05, Fredrik Karlsson <[EMAIL PROTECTED]> wrote: > Hi all, > > I have a PVR-350 and recently got a PVR-150 (PAL). I have tried for a > number of days now to get the two cards to work together with the 350 > card still as card 0. The 350 ard still works with this setup, but I > get I/O error when accessing video1 (i.e. the 150 card). > > Now, I have moved the cards around in the box, and finally I can tune > on both of them, with great quality. Good work guys! > > But, I cannot use TV out on the 350 card. Nothing happends... > This is my setup: > > mythtv root # cat /etc/modules.d/ivtv > > alias char-major-81 videodev > alias char-major-81-0 ivtv > alias char-major-81-1 ivtv > > options saa7127 i2c_enable=1,-1 > options ivtv ivtv_debug=1 ivtv_std=2 tda9887=0 cardtype=6,2 > options cx25840 i2c_enable=-1,1 no_black_magic=1 > > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.3.4 (v) loading > ivtv: Linux version: 2.6.11-gentoo-r6 SMP preempt K7 4KSTACKS gcc-3.3 > ivtv: In case of problems please include the debug info > ivtv: between the START INIT IVTV and END INIT IVTV lines when > ivtv: mailing the ivtv-devel mailinglist. > ivtv: Autodetected WinTV PVR 150 card > ivtv: Found an iTVC16 based chip > ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 16 (level, low) -> IRQ 16 > ivtv: VIA PCI device: 0x3205 vendor: 0x1106 > saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) > tveeprom: Hauppauge: model = 26034, rev = C197, serial# = 7839719 > tveeprom: tuner = LG PAL (TAPE Series) (idx = 97, type = 55) > tveeprom: tuner fmt = PAL(B/G) PAL(D/K) (eeprom = 0x44, v4l2 = 0x00000e07) > tveeprom: audio_processor = MSP3400C (type = 4) > ivtv: i2c attach [client=tveeprom[50],ok] > ivtv: Tuner Type 55, Tuner formats 0x00000e07, Radio: yes, Model > 0x008d1657, Revision 0x00000000 > ivtv: PAL tuner detected > ivtv: Radio detected > tuner: Ignoring new-style parameters in presence of obsolete ones > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 > ivtv: i2c attach [client=(tuner unset),ok] > cx25840: starting probe for adapter SMBus Via Pro adapter at 5000 (0x0) > cx25840: starting probe for adapter ISA main adapter (0x0) > cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005) > cx25840: detecting client on address 0x88 > cx25840: writing init values > cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 14264 loaded. > cx25840: FW image md5 digest: 3a4803384f749d644ee1f1ca9dcb12fa > cx25840: FW image sha1 digest: 2b5e6292b7391c980b93d156cf6b34178ce770f6 > cx25840: Status: cx258423 (DEVICE_ID) > ivtv: i2c attach [client=cx25840[50],ok] > ivtv: i2c attach [client=wm8775[50],ok] > ivtv: Encoder revision: 0x02050032 > ivtv: Encoder Firmware may be buggy, use version 0x02040011 > ivtv: Configuring WinTV PVR 150 card with 5 streams > ivtv: Registered v4l2 device, streamtype 0 minor 0 > ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 1 minor 32 > ivtv: Create DMA stream 1 using 20 103680 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 2 minor 224 > ivtv: Create DMA stream 2 using 32 65536 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 3 minor 24 > ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 4 minor 64 > ivtv: Create stream 4 > ivtv: ivtv_enc_thread: pid = 15960, itv = 0xce9f02e0 > ivtv: Setting Tuner 55 > tuner: type set to 55 (LG PAL (TAPE series)) by ivtv i2c driver #0 > cx25840: decoder set input (6) > cx25840: Tuner Input > ivtv: ivtv_enc_vbi_thread: pid = 15961, itv = 0xce9f02e0 > ivtv: Switching standard to PAL. > cx25840: decoder set norm PAL > ivtv: Initialized WinTV PVR 150, card #0 > ivtv: Autodetected WinTV PVR 350 card > ivtv: Found an iTVC15 based chip > ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18 > ivtv: VIA PCI device: 0x3205 vendor: 0x1106 > tda9885/6/7: chip found @ 0x86 > ivtv: i2c attach [client=tda9887,ok] > saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005) > saa7115: detecting saa7115 client on address 0x42 > saa7115: writing init values > ivtv: i2c attach [client=saa7115[50],ok] > saa7115: status: (1E) 0x80, (1F) 0x90 > tveeprom: Hauppauge: model = 48139, rev = K257, serial# = 7671326 > tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38) > tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = > 0x74, v4l2 = 0x00400e17) > tveeprom: audio_processor = CS5331 (type = 9) > ivtv: i2c attach [client=tveeprom[50],ok] > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 > ivtv: i2c attach [client=(tuner unset),ok] > cx25840: starting probe for adapter ivtv i2c driver #1 (0x10005) > cx25840: detecting client on address 0x88 > cx25840: writing init values > cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 14264 loaded. > cx25840: FW image md5 digest: 3a4803384f749d644ee1f1ca9dcb12fa > cx25840: FW image sha1 digest: 2b5e6292b7391c980b93d156cf6b34178ce770f6 > cx25840: Status: cx25 0 (DEVICE_ID) > ivtv: i2c attach [client=cx25840[50],ok] > ivtv: Tuner Type 38, Tuner formats 0x00400e17, Radio: yes, Model > 0x00ad2557, Revision 0x00000001 > ivtv: PAL tuner detected > ivtv: SECAM tuner detected > ivtv: Radio detected > saa7127: Ignoring new-style parameters in presence of obsolete ones > saa7127: video encoder driver version V 0.3 loaded > msp34xx: ivtv version > msp34xx: init: chip=MSP3418W-B3, has NICAM support, simple (D) mode, > simpler (G) no-thread mode > msp34xx: $Id$ compiled on: May 18 2005 15:23:05 > ivtv: i2c attach [client=MSP3418W-B3,ok] > ivtv: Encoder revision: 0x02050032 > ivtv: Encoder Firmware may be buggy, use version 0x02040011 > ivtv: Decoder revision: 0x02020023 > ivtv: Configuring WinTV PVR 350 card with 10 streams > ivtv: Registered v4l2 device, streamtype 0 minor 1 > ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 1 minor 33 > ivtv: Create DMA stream 1 using 20 103680 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 2 minor 225 > ivtv: Create DMA stream 2 using 32 65536 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 3 minor 25 > ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 4 minor 65 > ivtv: Create stream 4 > ivtv: Registered v4l2 device, streamtype 5 minor 17 > ivtv: Create DMA stream 5 using 16 65536 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 6 minor 229 > ivtv: Create DMA stream 6 using 1024 2048 byte buffers 0 kbytes total > ivtv: Registered v4l2 device, streamtype 7 minor 233 > ivtv: Create stream 7 > ivtv: Registered v4l2 device, streamtype 8 minor 49 > ivtv: Create DMA stream 8 using 20 103680 byte buffers 0 kbytes total > ivtv: Create DMA stream 9 using 32 65536 byte buffers 0 kbytes total > ivtv: Setting Tuner 38 > tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv > i2c driver #1 > saa7115: decoder set input (4) > saa7115: now setting Composite input > ivtv: ivtv_enc_thread: pid = 16151, itv = 0xcea135fc > ivtv: ivtv_enc_vbi_thread: pid = 16152, itv = 0xcea135fc > ivtv: ivtv_dec_thread: pid = 16153, itv = 0xcea135fc > ivtv: ivtv_dec_vbi_thread: pid = 16154, itv = 0xcea135fc > ivtv: Setting audio matrix to input 3, output 1 > ivtv: Switching standard to PAL. > saa7115: decoder set norm PAL > saa7115: set audio: 0x01 > cx25840: invalid ioctl 40046502 > ivtv: Initialized WinTV PVR 350, card #1 > ivtv: ==================== END INIT IVTV ==================== > > With some captured input, I may do > > cat out1.mpd > /dev/video17 > > But, nothing happends. I get an error message when using video16. > I can install the framebuffer using > > > modprobe ivtv-fb ivtv_fb_card_id=1 > > But nothing happends. When I try to start X on the framebuffer, I get: > > (EE) IVTVDEV(0): FBIOBLANK: Invalid argument > At the end of the log and not even a flicker on the screen... > > Anyone know what I should do? If I only use the PVR-350 card, or have > it as the first card, the output works. > > /Fredrik > > -- > My Gentoo + PVR-350 + IVTV + MythTV blog is on > http://gentoomythtv.blogspot.com/ > > ------------------------------------------------------- > This SF.Net email is sponsored by Oracle Space Sweepstakes > Want to be the first software developer in space? > Enter now for the Oracle Space Sweepstakes! > http://ads.osdn.com/?ad_idt12&alloc_id344&opclick > _______________________________________________ > ivtv-devel mailing list > ivtv-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/ivtv-devel > ------------------------------------------------------- This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes! http://ads.osdn.com/?ad_idt12&alloc_id344&op=click _______________________________________________ ivtv-devel mailing list ivtv-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ivtv-devel
