Hello, I've a PVR 150 for some time now. I've been trying to get the card working since the driver ivtv-0.3.2h, but the the only thing I get working is sound and sometimes a very vague image of a tv image.
I use ptune-ui.pl to search a good frequency, and mplayer to view the result. mplayer -vo xv -x 640 -y 480 /dev/video0 I live in the netherlands, so I use PAL, table europe-west. (near Den Haag). Only sound for example at channel 31-32 (Rai UNO), no image at all. This is the same for other channels. Where a channel should be found sound appears, but no image. I'm totally stuck. Has somebody good results here? Stef Bon /etc/modprobe.conf: alias char-major-81 ����videodev alias char-major-81-0���ivtv options cx25840���������i2c_enable=1,1,1,1 no_black_magic options ivtv��������������������tuner=58,58,58,58 logfile: May 16 06:54:35 celeron ivtv: ==================== START INIT IVTV ==================== May 16 06:54:35 celeron ivtv: version 0.3.4 (s) loading May 16 06:54:35 celeron ivtv: Linux version: 2.6.11.7 preempt PENTIUM4 gcc-3.4 May 16 06:54:35 celeron ivtv: In case of problems please include the debug info May 16 06:54:35 celeron ivtv: between the START INIT IVTV and END INIT IVTV lines when May 16 06:54:35 celeron ivtv: mailing the ivtv-devel mailinglist. May 16 06:54:35 celeron ivtv: Autodetected WinTV PVR 150 card May 16 06:54:35 celeron ivtv: Found an iTVC16 based chip May 16 06:54:35 celeron ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 19 May 16 06:54:35 celeron ivtv: VIA PCI device: 0x3168 vendor: 0x1106 May 16 06:54:35 celeron tveeprom: Hauppauge: model = 26559, rev = C260, serial# = 2897697 May 16 06:54:35 celeron tveeprom: tuner = LG S001D MK3 (idx = 60, type = 58) May 16 06:54:35 celeron tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) May 16 06:54:35 celeron tveeprom: audio_processor = MSP3410D (type = 5) May 16 06:54:35 celeron ivtv: i2c attach [client=tveeprom[50],ok] May 16 06:54:35 celeron ivtv: Tuner Type 58, Tuner formats 0x00400e17, Radio: yes, Model 0x008d2590, Revision 0x00000001 May 16 06:54:35 celeron ivtv: PAL tuner detected May 16 06:54:35 celeron ivtv: SECAM tuner detected May 16 06:54:35 celeron ivtv: Radio detected May 16 06:54:35 celeron tuner: Ignoring new-style parameters in presence of obsolete ones May 16 06:54:35 celeron tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 May 16 06:54:35 celeron ivtv: i2c attach [client=(tuner unset),ok] May 16 06:54:35 celeron cx25840: starting probe for adapter ISA main adapter (0x0) May 16 06:54:35 celeron cx25840: starting probe for adapter SMBus Via Pro adapter at 0400 (0x0) May 16 06:54:35 celeron cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005) May 16 06:54:35 celeron cx25840: detecting client on address 0x88 May 16 06:54:35 celeron cx25840: writing init values May 16 06:54:39 celeron cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 14264 loaded. May 16 06:54:39 celeron cx25840: FW image md5 digest: 3a4803384f749d644ee1f1ca9dcb12fa May 16 06:54:39 celeron cx25840: FW image sha1 digest: 2b5e6292b7391c980b93d156cf6b34178ce770f6 May 16 06:54:39 celeron cx25840: Status: cx258433 (DEVICE_ID) May 16 06:54:39 celeron ivtv: i2c attach [client=cx25840[50],ok] May 16 06:54:39 celeron ivtv: i2c attach [client=wm8775[50],ok] May 16 06:54:40 celeron ivtv: Encoder revision: 0x02050032 May 16 06:54:40 celeron ivtv: Encoder Firmware may be buggy, use version 0x02040011 May 16 06:54:40 celeron ivtv: Configuring WinTV PVR 150 card with 5 streams May 16 06:54:40 celeron ivtv: Registered v4l2 device, streamtype 0 minor 0 May 16 06:54:40 celeron ivtv: Create DMA stream 0 using 128 16384 byte buffers � 0 kbytes total May 16 06:54:40 celeron ivtv: Registered v4l2 device, streamtype 1 minor 32 May 16 06:54:40 celeron ivtv: Create DMA stream 1 using 20 103680 byte buffers � 0 kbytes total May 16 06:54:40 celeron ivtv: Registered v4l2 device, streamtype 2 minor 224 May 16 06:54:40 celeron ivtv: Create DMA stream 2 using 32 65536 byte buffers � 0 kbytes total May 16 06:54:40 celeron ivtv: Registered v4l2 device, streamtype 3 minor 24 May 16 06:54:40 celeron ivtv: Create DMA stream 3 using 455 4608 byte buffers � 0 kbytes total May 16 06:54:40 celeron ivtv: Registered v4l2 device, streamtype 4 minor 64 May 16 06:54:40 celeron ivtv: Create stream 4 May 16 06:54:40 celeron ivtv: Setting Tuner 58 May 16 06:54:40 celeron tuner: type set to 58 (LG PAL TAPE-S001D) by ivtv i2c driver #0 May 16 06:54:40 celeron cx25840: decoder set input (6) May 16 06:54:40 celeron cx25840: Tuner Input May 16 06:54:40 celeron ivtv: ivtv_enc_thread: pid = 1597, itv = 0xd0b35e20 May 16 06:54:40 celeron ivtv: ivtv_enc_vbi_thread: pid = 1598, itv = 0xd0b35e20 May 16 06:54:40 celeron ivtv: Switching standard to PAL. May 16 06:54:40 celeron cx25840: decoder set norm PAL May 16 06:54:41 celeron ivtv: Initialized WinTV PVR 150, card #0 May 16 06:54:41 celeron ivtv: ==================== �END INIT IVTV � ==================== May 16 06:57:28 celeron ivtv: Allocate DMA stream 0 using 128 16384 byte buffers �2097152 kbytes total May 16 06:57:28 celeron ivtv: Setup VBI API header 0x0000bd0f pkts 1 buffs 6 ln 36 sz 1456 May 16 06:57:28 celeron ivtv: Setup VBI start 0x002fea04 frames 6 fpi 1 lines 0x000000f1 May 16 06:57:28 celeron cx25840: decoder disable output May 16 06:57:28 celeron cx25840: decoder enable output ------------------------------------------------------- This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes! http://ads.osdn.com/?ad_idt12&alloc_id344&op=click _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
