This looks very familiar. I'd this problem a long time ago. This means you are very close
Try the following for PAL: #/sbin/depmod -a # /usr/bin/ivtvctl -u 0xff # /usr/bin/ivtvctl -p 4 # /usr/bin/ivtvctl -f width=720,height=576 # ivtvctl -j reg=0x6c,val=0xfe -d /dev/video0 # /sbin/modprobe ivtv # /sbin/modprobe ivtv-fb # /usr/bin/ivtvctl -c dnr_mode=0 # /usr/bin/ivtvctl -c dnr_temporal=0 # /usr/bin/ivtvctl -c dnr_spatial=0 adjust parameters for NTCS if needed. you can put this in rc.local to start. gr Patrick > > Greetings all� > > I am new to installing and configuring MythTV (but very willing to > learn!).� > I am not quite as new, but still no expert to linux in general, and Fedora > specifically. > > I have been following Wilson�s Fedora Myth(TV)ology::HOWTO page to get > MythTV up and running, and have run into a (hopefully slight!) roadblock > in > getting the PVR-350 drivers installed and configured correctly. > > System: > ������������� Asus Pundit (actually a Pundit-S, according to their > website, > as it has a BIOS revision >1.04 and [accordingly] Prescott processor > support) > ������������� 2.0GHz Celeron D (Prescott) 533FSB processor > ������������� 512 MB ram > ������������� PVR-350 > > I�ve attached an image to this message that shows what my TV-out output > looks like after loading (via modprobe) both ivtv and ivtv-fb. ��The > output > is black until after ivtv-fb loads.�� If I unload saa7127, the screen > returns to black until I reload saa7127 (with or without specifying the > �test_image=1� parameter).� I have read through the TikiWiki page titled > �Getting TV OUT working with your PVR-350�, and the procedure(s) described > there produced identical output on the TV-out, even though modprobe > clearly > doesn�t care for the �add above�, �add below�, or �post-install� verbs > specified in the example modprobe.conf file shown there). > > I�ve been reading through the recent messages (and by that, I mean the > last > couple days worth) regarding new ivtv drivers, and the success folks are > having with their PVR-350 (as well as other) cards. �In context, it seems > as > though those folks had (at least) somewhat useable video before� perhaps > not. ��In any case, I�m quite eager to get MythTV up and running here, and > would deeply appreciate any/all help in straightening out the problem I�m > currently experiencing with (I�m assuming) the ivtv drivers. ��Please let > me > know if there is some other information about my system I may need to > provide to help resolve this issue. > > ��- Brian > > > > The relevant portion of my /var/log/messages file, regarding ivtv, is > shown > below: > > Jun� 5 00:20:04 mythtv kernel: ivtv: ==================== START INIT IVTV > ===================Jun� 5 00:20:04 mythtv kernel: ivtv: version 0.2.0 > (rc3j) loading > Jun� 5 00:20:04 mythtv kernel: ivtv: Linux version: 2.6.11-1.27_FC3 686 > REGPARM 4KSTACKS gcc-3.4 > Jun� 5 00:20:04 mythtv kernel: ivtv: In case of problems please include > the > debug info > Jun� 5 00:20:04 mythtv kernel: ivtv: between the START INIT IVTV and END > INIT IVTV lines when > Jun� 5 00:20:04 mythtv kernel: ivtv: mailing the ivtv-devel mailinglist. > Jun� 5 00:20:04 mythtv kernel: ivtv: Autodetected WinTV PVR 350 card > Jun� 5 00:20:04 mythtv kernel: ivtv: Found an iTVC15 based chip > Jun� 5 00:20:04 mythtv kernel: ACPI: PCI interrupt 0000:00:0e.0[A] -> GSI > 10 > (level, low) -> IRQ 10 > Jun� 5 00:20:04 mythtv kernel: ivtv: XXX PCI device: 0x0651 vendor: 0x1039 > Jun� 5 00:20:04 mythtv kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv > i2c driver #0 > Jun� 5 00:20:04 mythtv kernel: ivtv: i2c attach [client=(tuner unset),ok] > Jun� 5 00:20:05 mythtv kernel: tuner: type set to 21 (Temic NTSC (4039 > FR5)) > by insmod option > Jun� 5 00:20:05 mythtv kernel: tuner: The type=<n> insmod option will go > away soon. > Jun� 5 00:20:05 mythtv kernel: tuner: Please use the tuner=<n> option > provided by > Jun� 5 00:20:05 mythtv kernel: tuner: tv aard core driver (bttv, saa7134, > ...) instead. > Jun� 5 00:20:05 mythtv kernel: msp34xx: init: chip=MSP3448W-A2 +nicam > +simple +simpler +radio mode=simple > Jun� 5 00:20:05 mythtv kernel: ivtv: i2c attach [client=MSP3448W-A2,ok] > Jun� 5 00:20:05 mythtv kernel: msp3410: daemon started > Jun� 5 00:20:05 mythtv kernel: msp3400: error while reading chip version > Jun� 5 00:20:05 mythtv kernel: saa7127: detecting saa7127 client on > address > 0x88 > Jun� 5 00:20:05 mythtv kernel: saa7127: Selecting NTSC video Standard > Jun� 5 00:20:05 mythtv kernel: saa7127: Selecting S-Video+Composite > Jun� 5 00:20:05 mythtv kernel: saa7127: Turn WSS off > Jun� 5 00:20:05 mythtv kernel: saa7127: Widescreen Mode 4:3 Full Format > Jun� 5 00:20:05 mythtv kernel: saa7127: Selecting Normal Encoder Input > Jun� 5 00:20:05 mythtv kernel: saa7127: Enable Video Output > Jun� 5 00:20:05 mythtv kernel: ivtv: i2c attach [client=saa7127[0],ok] > Jun� 5 00:20:05 mythtv kernel: saa7115: starting probe for adapter ivtv > i2c > driver #0 (0x10005) > Jun� 5 00:20:05 mythtv kernel: saa7115: detecting saa7115 client on > address > 0x42 > Jun� 5 00:20:05 mythtv kernel: saa7115: writing init values > Jun� 5 00:20:05 mythtv kernel: ivtv: i2c attach [client=saa7115[0],ok] > Jun� 5 00:20:05 mythtv kernel: saa7115: status: (1E) 0x48, (1F) 0xc0 > Jun� 5 00:20:05 mythtv kernel: ivtv: i2c attach [client=tveeprom,ok] > Jun� 5 00:20:05 mythtv kernel: tveeprom: Hauppauge: model = 48132, rev > K168, serial# = 2947868 > Jun� 5 00:20:05 mythtv kernel: tveeprom: tuner = LG TAPE H001F MK3 (idx > 68, type = 47) > Jun� 5 00:20:05 mythtv kernel: tveeprom: tuner fmt = NTSC(M) (eeprom = > 0x08, > v4l2 = 0x00001000) > Jun� 5 00:20:05 mythtv kernel: tveeprom: audio_processor = MSP3440 (type > 11) > Jun� 5 00:20:05 mythtv kernel: ivtv: Tuner Type 47, Tuner formats > 0x00001000, Radio: yes, Model 0x00ad1598, Revision 0xdce79433 > Jun� 5 00:20:05 mythtv kernel: ivtv: NTSC tuner detected > Jun� 5 00:20:05 mythtv kernel: ivtv: Radio detected > Jun� 5 00:20:06 mythtv kernel: ivtv: Encoder revision: 0x02040024 > Jun� 5 00:20:06 mythtv kernel: ivtv: Encoder Firmware may be buggy, use > version 0x02040011 > Jun� 5 00:20:06 mythtv kernel: ivtv: Decoder revision: 0x02020023 > Jun� 5 00:20:06 mythtv kernel: ivtv: Configuring WinTV PVR 350 card with 9 > streams > Jun� 5 00:20:06 mythtv kernel: ivtv: Create DMA stream 0 using 256 16384 > byte buffers� 4194304 kbytes total > Jun� 5 00:20:06 mythtv kernel: ivtv: Registered v4l2 device, streamtype 0 > minor 0 > Jun� 5 00:20:06 mythtv kernel: ivtv: Create DMA stream 1 > Jun� 5 00:20:06 mythtv kernel: ivtv: Registered v4l2 device, streamtype 1 > minor 32 > Jun� 5 00:20:06 mythtv kernel: ivtv: Create stream 2 using 40 52224 byte > buffers� 2097152 kbytes total > Jun� 5 00:20:06 mythtv kernel: ivtv: Registered v4l2 device, streamtype 2 > minor 224 > Jun� 5 00:20:06 mythtv kernel: ivtv: Create DMA stream 3 using 455 4608 > byte > buffers� 2097152 kbytes total > Jun� 5 00:20:06 mythtv kernel: ivtv: Registered v4l2 device, streamtype 3 > minor 24 > Jun� 5 00:20:06 mythtv kernel: ivtv: Create stream 4 > Jun� 5 00:20:06 mythtv kernel: ivtv: Registered v4l2 device, streamtype 4 > minor 64 > Jun� 5 00:20:06 mythtv kernel: ivtv: Create DMA stream 5 using 16 65536 > byte > buffers� 1048576 kbytes total > Jun� 5 00:20:06 mythtv kernel: ivtv: Registered v4l2 device, streamtype 5 > minor 16 > Jun� 5 00:20:06 mythtv kernel: ivtv: Create stream 6 using 1024 2048 byte > buffers� 262144 kbytes total > Jun� 5 00:20:06 mythtv kernel: ivtv: Registered v4l2 device, streamtype 6 > minor 228 > Jun� 5 00:20:06 mythtv kernel: ivtv: Create stream 7 > Jun� 5 00:20:06 mythtv kernel: ivtv: Registered v4l2 device, streamtype 7 > minor 232 > Jun� 5 00:20:06 mythtv kernel: ivtv: Create DMA stream 8 > Jun� 5 00:20:06 mythtv kernel: ivtv: Registered v4l2 device, streamtype 8 > minor 48 > Jun� 5 00:20:06 mythtv kernel: ivtv: Setting Tuner 21 > Jun� 5 00:20:06 mythtv kernel: saa7115: decoder set input (4) > Jun� 5 00:20:06 mythtv kernel: saa7115: now setting Composite input > Jun� 5 00:20:06 mythtv kernel: ivtv: Setting audio matrix to input 3, > output > 1 > Jun� 5 00:20:06 mythtv kernel: ivtv: Switching standard to NTSC. > Jun� 5 00:20:06 mythtv kernel: saa7115: decoder set norm NTSC > Jun� 5 00:20:06 mythtv kernel: saa7115: set audio: 0x01 > Jun� 5 00:20:06 mythtv kernel: saa7127: Setting Encoder Video Standard > Jun� 5 00:20:06 mythtv kernel: saa7127: Set NTSC Video Mode > Jun� 5 00:20:06 mythtv kernel: saa7127: Selecting NTSC video Standard > Jun� 5 00:20:06 mythtv kernel: ivtv: Initialized WinTV PVR 350, card #0 > Jun� 5 00:20:06 mythtv kernel: ivtv: ====================� END INIT IVTV� > ================== -- gr. patrick ------------------------------------------------------- This SF.Net email is sponsored by: NEC IT Guy Games. How far can you shotput a projector? How fast can you ride your desk chair down the office luge track? If you want to score the big prize, get to know the little guy. Play to win an NEC 61" plasma display: http://www.necitguy.com/?r _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
